PostgreSQL - fetch the row which has the Max value for a column

Solution 1:

I would propose a clean version based on DISTINCT ON (see docs):

SELECT DISTINCT ON (usr_id)
    time_stamp,
    lives_remaining,
    usr_id,
    trans_id
FROM lives
ORDER BY usr_id, time_stamp DESC, trans_id DESC;

Solution 2:

On a table with 158k pseudo-random rows (usr_id uniformly distributed between 0 and 10k, trans_id uniformly distributed between 0 and 30),

By query cost, below, I am referring to Postgres' cost based optimizer's cost estimate (with Postgres' default xxx_cost values), which is a weighed function estimate of required I/O and CPU resources; you can obtain this by firing up PgAdminIII and running "Query/Explain (F7)" on the query with "Query/Explain options" set to "Analyze"

• Quassnoy's query has a cost estimate of 745k (!), and completes in 1.3 seconds (given a compound index on (usr_id, trans_id, time_stamp))
• Bill's query has a cost estimate of 93k, and completes in 2.9 seconds (given a compound index on (usr_id, trans_id))
• Query #1 below has a cost estimate of 16k, and completes in 800ms (given a compound index on (usr_id, trans_id, time_stamp))
• Query #2 below has a cost estimate of 14k, and completes in 800ms (given a compound function index on (usr_id, EXTRACT(EPOCH FROM time_stamp), trans_id))
  • this is Postgres-specific
• Query #3 below (Postgres 8.4+) has a cost estimate and completion time comparable to (or better than) query #2 (given a compound index on (usr_id, time_stamp, trans_id)); it has the advantage of scanning the lives table only once and, should you temporarily increase (if needed) work_mem to accommodate the sort in memory, it will be by far the fastest of all queries.

All times above include retrieval of the full 10k rows result-set.

Your goal is minimal cost estimate and minimal query execution time, with an emphasis on estimated cost. Query execution can dependent significantly on runtime conditions (e.g. whether relevant rows are already fully cached in memory or not), whereas the cost estimate is not. On the other hand, keep in mind that cost estimate is exactly that, an estimate.

The best query execution time is obtained when running on a dedicated database without load (e.g. playing with pgAdminIII on a development PC.) Query time will vary in production based on actual machine load/data access spread. When one query appears slightly faster (<20%) than the other but has a much higher cost, it will generally be wiser to choose the one with higher execution time but lower cost.

When you expect that there will be no competition for memory on your production machine at the time the query is run (e.g. the RDBMS cache and filesystem cache won't be thrashed by concurrent queries and/or filesystem activity) then the query time you obtained in standalone (e.g. pgAdminIII on a development PC) mode will be representative. If there is contention on the production system, query time will degrade proportionally to the estimated cost ratio, as the query with the lower cost does not rely as much on cache whereas the query with higher cost will revisit the same data over and over (triggering additional I/O in the absence of a stable cache), e.g.:

              cost | time (dedicated machine) |     time (under load) |
-------------------+--------------------------+-----------------------+
some query A:   5k | (all data cached)  900ms | (less i/o)     1000ms |
some query B:  50k | (all data cached)  900ms | (lots of i/o) 10000ms |

Do not forget to run ANALYZE lives once after creating the necessary indices.

Query #1

-- incrementally narrow down the result set via inner joins
--  the CBO may elect to perform one full index scan combined
--  with cascading index lookups, or as hash aggregates terminated
--  by one nested index lookup into lives - on my machine
--  the latter query plan was selected given my memory settings and
--  histogram
SELECT
  l1.*
 FROM
  lives AS l1
 INNER JOIN (
    SELECT
      usr_id,
      MAX(time_stamp) AS time_stamp_max
     FROM
      lives
     GROUP BY
      usr_id
  ) AS l2
 ON
  l1.usr_id     = l2.usr_id AND
  l1.time_stamp = l2.time_stamp_max
 INNER JOIN (
    SELECT
      usr_id,
      time_stamp,
      MAX(trans_id) AS trans_max
     FROM
      lives
     GROUP BY
      usr_id, time_stamp
  ) AS l3
 ON
  l1.usr_id     = l3.usr_id AND
  l1.time_stamp = l3.time_stamp AND
  l1.trans_id   = l3.trans_max

Query #2

-- cheat to obtain a max of the (time_stamp, trans_id) tuple in one pass
-- this results in a single table scan and one nested index lookup into lives,
--  by far the least I/O intensive operation even in case of great scarcity
--  of memory (least reliant on cache for the best performance)
SELECT
  l1.*
 FROM
  lives AS l1
 INNER JOIN (
   SELECT
     usr_id,
     MAX(ARRAY[EXTRACT(EPOCH FROM time_stamp),trans_id])
       AS compound_time_stamp
    FROM
     lives
    GROUP BY
     usr_id
  ) AS l2
ON
  l1.usr_id = l2.usr_id AND
  EXTRACT(EPOCH FROM l1.time_stamp) = l2.compound_time_stamp[1] AND
  l1.trans_id = l2.compound_time_stamp[2]

2013/01/29 update

Finally, as of version 8.4, Postgres supports Window Function meaning you can write something as simple and efficient as:

Query #3

-- use Window Functions
-- performs a SINGLE scan of the table
SELECT DISTINCT ON (usr_id)
  last_value(time_stamp) OVER wnd,
  last_value(lives_remaining) OVER wnd,
  usr_id,
  last_value(trans_id) OVER wnd
 FROM lives
 WINDOW wnd AS (
   PARTITION BY usr_id ORDER BY time_stamp, trans_id
   ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING
 );

Solution 3:

Here's another method, which happens to use no correlated subqueries or GROUP BY. I'm not expert in PostgreSQL performance tuning, so I suggest you try both this and the solutions given by other folks to see which works better for you.

SELECT l1.*
FROM lives l1 LEFT OUTER JOIN lives l2
  ON (l1.usr_id = l2.usr_id AND (l1.time_stamp < l2.time_stamp 
   OR (l1.time_stamp = l2.time_stamp AND l1.trans_id < l2.trans_id)))
WHERE l2.usr_id IS NULL
ORDER BY l1.usr_id;

I am assuming that trans_id is unique at least over any given value of time_stamp.

Solution 4:

I like the style of Mike Woodhouse's answer on the other page you mentioned. It's especially concise when the thing being maximised over is just a single column, in which case the subquery can just use MAX(some_col) and GROUP BY the other columns, but in your case you have a 2-part quantity to be maximised, you can still do so by using ORDER BY plus LIMIT 1 instead (as done by Quassnoi):

SELECT * 
FROM lives outer
WHERE (usr_id, time_stamp, trans_id) IN (
    SELECT usr_id, time_stamp, trans_id
    FROM lives sq
    WHERE sq.usr_id = outer.usr_id
    ORDER BY trans_id, time_stamp
    LIMIT 1
)

I find using the row-constructor syntax WHERE (a, b, c) IN (subquery) nice because it cuts down on the amount of verbiage needed.