Can't call C standard library function on 64-bit Linux from assembly (yasm) code

TL:DR: 3 options:

  • Build a non-PIE executable (gcc -no-pie -fno-pie call-lib.c libcall.o) so the linker will generate a PLT entry for you transparently when you write call puts.
  • call puts wrt ..plt like gcc -fPIE would do.
  • call [rel puts wrt ..got] like gcc -fno-plt would do.

The latter two will work in PIE executables or shared libraries. The 3rd way, wrt ..got, is slightly more efficient.


Your gcc is building PIE executables by default (32-bit absolute addresses no longer allowed in x86-64 Linux?).

I'm not sure why, but when doing so the linker doesn't automatically resolve call puts to call puts@plt. There is still a puts PLT entry generated, but the call doesn't go there.

At runtime, the dynamic linker tries to resolve puts directly to the libc symbol of that name and fixup the call rel32. But the symbol is more than +-2^31 away, so we get a warning about overflow of the R_X86_64_PC32 relocation. The low 32 bits of the target address are correct, but the upper bits aren't. (Thus your call jumps to a bad address).


Your code works for me if I build with gcc -no-pie -fno-pie call-lib.c libcall.o. The -no-pie is the critical part: it's the linker option. Your YASM command doesn't have to change.

When making a traditional position-dependent executable, the linker turns the puts symbol for the call target into puts@plt for you, because we're linking a dynamic executable (instead of statically linking libc with gcc -static -fno-pie, in which case the call could go directly to the libc function.)

Anyway, this is why gcc emits call puts@plt (GAS syntax) when compiling with -fpie (the default on your desktop, but not the default on https://godbolt.org/), but just call puts when compiling with -fno-pie.


See What does @plt mean here? for more about the PLT, and also Sorry state of dynamic libraries on Linux from a few years ago. (The modern gcc -fno-plt is like one of the ideas in that blog post.)


BTW, a more accurate/specific prototype would let gcc avoid zeroing EAX before calling foo:

extern void foo(); in C means extern void foo(...);
You could declare it as extern void foo(void);, which is what () means in C++. C++ doesn't allow function declarations that leave the args unspecified.


asm improvements

You can also put message in section .rodata (read-only data, linked as part of the text segment).

You don't need a stack frame, just something to align the stack by 16 before a call. A dummy push rax will do it.

Or we can tail-call puts by jumping to it instead of calling it, with the same stack position as on entry to this function. This works with or without PIE. Just replace call with jmp, as long as RSP is pointing at your own return address.

If you want to make PIE executables (or shared libraries), you have two options

  • call puts wrt ..plt - explicitly call through the PLT.
  • call [rel puts wrt ..got] - explicitly do an indirect call through the GOT entry, like gcc's -fno-plt style of code-gen. (Using a RIP-relative addressing mode to reach the GOT, hence the rel keyword).

WRT = With Respect To. The NASM manual documents wrt ..plt, and see also section 7.9.3: special symbols and WRT.

Normally you would use default rel at the top of your file so you can actually use call [puts wrt ..got] and still get a RIP-relative addressing mode. You can't use a 32-bit absolute addressing mode in PIE or PIC code.

call [puts wrt ..got] assembles to a memory-indirect call using the function pointer that dynamic linking stored in the GOT. (Early-binding, not lazy dynamic linking.)

NASM documents ..got for getting the address of variables in section 9.2.3. Functions in (other) libraries are identical: you get a pointer from the GOT instead of calling directly, because the offset isn't a link-time constant and might not fit in 32-bits.

YASM also accepts call [puts wrt ..GOTPCREL], like AT&T syntax call *puts@GOTPCREL(%rip), but NASM does not.

; don't use BITS 64.  You *want* an error if you try to assemble this into a 32-bit .o

default rel          ; RIP-relative addressing instead of 32-bit absolute by default; makes the [rel ...] optional

section .rodata            ; .rodata is best for constants, not .data
message:
  db 'foo() called', 0

section .text

global foo
foo:
    sub    rsp, 8                ; align the stack by 16

    ; PIE with PLT
    lea    rdi, [rel message]      ; needed for PIE
    call   puts WRT ..plt          ; tailcall puts
;or
    ; PIE with -fno-plt style code, skips the PLT indirection
    lea   rdi, [rel message]
    call  [rel  puts wrt ..got]
;or
    ; non-PIE
    mov    edi, message           ; more efficient, but only works in non-PIE / non-PIC
    call   puts                   ; linker will rewrite it into call puts@plt

    add   rsp,8                   ; restore the stack, undoing the add
    ret

In a position-dependent Linux executable, you can use mov edi, message instead of a RIP-relative LEA. It's smaller code-size and can run on more execution ports on most CPUs. (Fun fact: MacOS always puts the "image base" outside the low 4GiB so this optimization isn't possible there.)

In a non-PIE executable, you also might as well use call puts or jmp puts and let the linker sort it out, unless you want more efficient no-plt style dynamic linking. But if you do choose to statically link libc, I think this is the only way you'll get a direct jmp to the libc function.

(I think the possibility of static linking for non-PIE is why ld is willing to generate PLT stubs automatically for non-PIE, but not for PIE or shared libraries. It requires you to say what you mean when linking ELF shared objects.)

If you did use call puts in a PIE (call rel32), it could only work if you statically linked a position-independent implementation of puts into your PIE, so the entire thing was one executable that would get loaded at a random address at runtime (by the usual dynamic-linker mechanism), but simply didn't have a dependency on libc.so.6


Linker "relaxing" calls when the target is present at static-link time

GAS call *bar@GOTPCREL(%rip) uses R_X86_64_GOTPCRELX (relaxable)
NASM call [rel bar wrt ..got] uses R_X86_64_GOTPCREL (not relaxable)

This is less of a problem with hand-written asm; you can just use call bar when you know the symbol will be present in another .o (rather than .so) that you're going to link. But C compilers don't know the difference between library functions and other user functions you declare with prototypes (unless you use stuff like gcc -fvisibility=hidden https://gcc.gnu.org/wiki/Visibility or attributes / pragmas).

Still, you might want to write asm source that the linker can optimize if you statically link a library, but AFAIK you can't do that with NASM. You can export a symbol as hidden (visible at static-link time, but not for dynamic linking in the final .so) with global bar:function hidden, but that's in the source file defining the function, not files accessing it.


global bar
bar:
    mov eax,231
    syscall
    call bar wrt ..plt
    call [rel bar wrt ..got]
extern bar

The 2nd file, after assembling with nasm -felf64 and disassembling with objdump -drwc -Mintel to see the relocations:

0000000000000000 <.text>:
   0:   e8 00 00 00 00          call   0x5      1: R_X86_64_PLT32       bar-0x4
   5:   ff 15 00 00 00 00       call   QWORD PTR [rip+0x0]        # 0xb 7: R_X86_64_GOTPCREL    bar-0x4

After linking with ld (GNU Binutils) 2.35.1 - ld bar.o bar2.o -o bar

0000000000401000 <_start>:
  401000:       e8 0b 00 00 00          call   401010 <bar>
  401005:       ff 15 ed 1f 00 00       call   QWORD PTR [rip+0x1fed]        # 402ff8 <.got>
  40100b:       0f 1f 44 00 00          nop    DWORD PTR [rax+rax*1+0x0]

0000000000401010 <bar>:
  401010:       b8 e7 00 00 00          mov    eax,0xe7
  401015:       0f 05                   syscall 

Note that the PLT form got relaxed to just a direct call bar, PLT eliminated. But the ff 15 call [rel mem] was not relaxed to an e8 rel32

With GAS:

_start:
        call    bar@plt
        call    *bar@GOTPCREL(%rip)

gcc -c foo.s && disas foo.o

0000000000000000 <_start>:
   0:   e8 00 00 00 00          call   5 <_start+0x5>   1: R_X86_64_PLT32       bar-0x4
   5:   ff 15 00 00 00 00       call   QWORD PTR [rip+0x0]        # b <_start+0xb>      7: R_X86_64_GOTPCRELX   bar-0x4

Note the X at the end of R_X86_64_GOTPCRELX.
ld bar2.o foo.o -o bar && disas bar:

0000000000401000 <bar>:
  401000:       b8 e7 00 00 00          mov    eax,0xe7
  401005:       0f 05                   syscall 

0000000000401007 <_start>:
  401007:       e8 f4 ff ff ff          call   401000 <bar>
  40100c:       67 e8 ee ff ff ff       addr32 call 401000 <bar>

Both calls got relaxed to a direct e8 call rel32 straight to the target address. The extra byte in indirect call is filled with a 67 address-size prefix (which has no effect on call rel32), padding the instruction to the same length. (Because it's too late to re-assemble and re-compute all relative branches within functions, and alignment and so on.)

That would happen for call *puts@GOTPCREL(%rip) if you statically linked libc, with gcc -static.


The 0xe8 opcode is followed by a signed offset to be applied to the PC (which has advanced to the next instruction by that time) to compute the branch target. Hence objdump is interpreting the branch target as 0x671.

YASM is rendering zeros because it has likely put a relocation on that offset, which is how it asks the loader to populate the correct offset for puts during loading. The loader is encountering an overflow when computing the relocation, which may indicate that puts is at a further offset from your call than can be represented in a 32-bit signed offset. Hence the loader fails to fix this instruction, and you get a crash.

66c: e8 00 00 00 00 shows the unpopulated address. If you look in your relocation table, you should see a relocation on 0x66d. It is not uncommon for the assembler to populate addresses/offsets with relocations as all zeros.

This page suggests that YASM has a WRT directive that can control use of .got, .plt, etc.

Per S9.2.5 on the NASM documentation, it looks like you can use CALL puts WRT ..plt (presuming YASM has the same syntax).