PXE boot - can't access BIOS
The issue I'm having is with a Dell Vostro 3360, Windows 7 64 Bit + Ubuntu 12.04 (Dual Boot).
Everything worked perfectly until one day after a windows update it started showing this message on start up (after the Dell logo):
Intel UNDI PXE-2.0 (build 083)
Copyright (C)...
For Atheros PCIE Ethernet Controller v2.1.1.1(12/23/11)
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
and then Ubuntu loads immediately instead of showing GRUB menu.
If I press Esc right before Ubuntu is loading I do get the GRUB screen but only with Ubuntu option (together with Memory test and recovery mode options)
If I connect the laptop to a network with a cable it tries to connect to DHCP instead of showing the Check cable connection! message (with an ASCII progress bar) but never succeeds.
I can access the Windows partitions and files from Ubuntu.
Pressing F12 or F2 does not do anything and I cannot access the BIOS options.
I tried fixing GRUB from recovery mode and with Boot-Repair but it didn't change anything.
I tried to remove the hard drive and boot to BIOS but F12 and F2 still didn't work and the laptop got stuck in a loop of the same PXE message and then reboot.
I tried removing the coin battery and replacing it hoping it will change anything.
I searched the web for a solution but nothing came up with a method I didn't already try.
How can I disable the PXE boot and restore access to the BIOS again?
Thank you.
You may have trouble accessing the BIOS from a warm boot but not a cold one because on the new fast systems the the quick boot is enabled and it boots though. After the bios update it was probably reset to BIOS Defaults which includes that setting. It also reordered your boot order enabling PXE boot. once you see the PXE boot message you are already past where you would need to get into the BIOS. Power it on and start tapping F2 (about twice a second) before you see any messages on the screen. you dont want to hold the F2 because it will trigger a stuck key message and dump the keyboard buffer when reaching the point where it would normally ask you to press F2.