Hibernate and resume from a swap file

Solution 1:

Here is what I did to make it work with Ubuntu 18.04.

• Make your /swapfile have at least the size of your RAM

sudo swapoff /swapfile
sudo dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo | awk '/MemTotal/ {print $2}') count=1024 conv=notrunc
sudo mkswap /swapfile
sudo swapon /swapfile

• Note the UUID of the partition containing your /swapfile:

$ sudo findmnt -no UUID -T /swapfile
20562a02-cfa6-42e0-bb9f-5e936ea763d0

• Reconfigure the package uswsusp in order to correctly use the swapfile:

sudo dpkg-reconfigure -pmedium uswsusp
# Answer "Yes" to continue without swap space
# Select "/dev/disk/by-uuid/20562a02-cfa6-42e0-bb9f-5e936ea763d0" replace the UUID with the result from the previous findmnt command
# Encrypt: "No"

• Edit the SystemD hibernate service using sudo systemctl edit systemd-hibernate.service and fill it with the following content:

[Service]
ExecStart=
ExecStartPre=-/bin/run-parts -v -a pre /lib/systemd/system-sleep
ExecStart=/usr/sbin/s2disk
ExecStartPost=-/bin/run-parts -v --reverse -a post /lib/systemd/system-sleep

• Note the resume offset of your /swapfile:

$ sudo swap-offset /swapfile
resume offset = 34818

• Configure Grub to resume from the swapfile by editing /etc/default/grub and modify the following line:

GRUB_CMDLINE_LINUX_DEFAULT="resume=UUID=20562a02-cfa6-42e0-bb9f-5e936ea763d0 resume_offset=34818 quiet splash"

• Update Grub:

sudo update-grub

• Create the following /etc/initramfs-tools/conf.d/resume:

RESUME=UUID=20562a02-cfa6-42e0-bb9e-5e936ea763d0 resume_offset=34816
    # Resume from /swapfile

• Update initramfs:

sudo update-initramfs -u -k all

Now you can hibernate with sudo systemctl hibernate.

One can also create those scripts:

sudo tee /usr/local/bin/gotosleep <<EOF
dbus-send --type=method_call --dest=org.gnome.ScreenSaver /org/gnome/ScreenSaver org.gnome.ScreenSaver.Lock
sleep 2
sudo /usr/sbin/s2both
EOF
sudo chmod +x /usr/local/bin/gotosleep
sudo tee /usr/local/bin/gotohibernation <<EOF
dbus-send --type=method_call --dest=org.gnome.ScreenSaver /org/gnome/ScreenSaver org.gnome.ScreenSaver.Lock
sleep 2
sudo systemctl hibernate
EOF
sudo chmod +x /usr/local/bin/gotohibernation

So you can sleep with gotosleep or hibernate with gotohibernation.

You must be able to execute sudo s2both, sudo s2ram and sudo systemctl hibernatewithout having to enter your password for the previous scripts to work.

You could do that for example by creating a powerdev group, add your current user to it, and configure the following sudoers config (edit it with sudo visudo -f /etc/sudoers.d/powerdev):

%powerdev ALL=NOPASSWD: /usr/sbin/s2both, /usr/sbin/s2ram, /bin/systemctl hibernate

Documentation used:

• Cas' answer
• Debian "Hibernate without swap partition"
• Configuring Lubuntu 18.04 to enable hibernation using a swap file
• So question "s2disk works, but hibernation from menu gets stuck afer login"

Solution 2:

Hibernate with Swap file using uswusp

Although it is possible to hibernate to swap file and it supposedly works with systemd hibernate by setting kernel parameters. However, I couldn't get it to resume so instead switched to using uswsusp (userspace software suspend). Here are the steps I used on Ubuntu 17.04/17.10.

Create the Swap File

The commands to create a formatted 4GiB swap file, mounted and added to /etc/fstab:

sudo fallocate -l 4g /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile
echo '/swapfile swap swap defaults 0 0' | sudo tee -a /etc/fstab

Verify Swap File Partition

sudo findmnt -no SOURCE,UUID -T /swapfile
> /dev/sda1 11cc33ee-1234-abcd-1234-ddeeff112233

Install Userspace Software Suspend (uswsusp)

sudo apt install uswsusp

Configure uswsusp

To create /etc/uswsusp.conf and recreate initramfs:

sudo dpkg-reconfigure -pmedium uswsusp

• Yes to 'Continue without a valid swap space?' (Wizard not set swap file yet.)
• Select the partition that the swap-file resides on, cross-reference with details from findmnt above. (Note:not the swap-file itself)

Note: Any changes manually made to /etc/uswsusp.conf will require recreating initramfs afterwards with this command:

sudo update-initramfs -u

Test uswusp hibernate

sudo s2disk

There should be snapshot messages on the screen on hibernate and resume.

Use s2disk with systemd hibernate

By default systemd will use it's own hibernate commands so replace them with the uswusp commands by overriding the systemd-hibernate.service:

sudo systemctl edit systemd-hibernate.service

In the text editor that opens put the following text (the blank ExecStart is required). Then save and exit:

[Service]
ExecStart=
ExecStart=/usr/sbin/s2disk 
ExecStartPost=/bin/run-parts -a post /lib/systemd/system-sleep

This will create /etc/systemd/system/systemd-hibernate.service.d/override.conf file with override details.

Test systemd hibernate :

systemctl hibernate 

Note: To check that the systemd override.conf has been created, loaded and no errors, run:

systemctl status systemd-hibernate.service

References:

• Debian Wiki - Hibernate_Without_Swap_Partition
• Arch Wiki - Uswsusp

Solution 3:

I've given a quick read to the tutorial and, if I have understood correctly, you just need to specify the resume options to the Linux command line. With Grub2 is really simple, and your changes will be always preserved. You need to edit the /etc/default/grub file, specifically this line:

GRUB_CMDLINE_LINUX="resume=... resume_offset=..."

After that, run sudo update-grub for the changes to take effect.

Changing GRUB_CMDLINE_LINUX won't affect other Linux installations you have (because /etc/grub.d/30_os-prober does not use this variable).

About the problem you're having: is the partition of the swapfile encrypted? If so, hibernation won't work. If not, then the output of filefrag -v /swapfile may be helpful.