Error handling in Bash
Use a trap!
tempfiles=( )
cleanup() {
rm -f "${tempfiles[@]}"
}
trap cleanup 0
error() {
local parent_lineno="$1"
local message="$2"
local code="${3:-1}"
if [[ -n "$message" ]] ; then
echo "Error on or near line ${parent_lineno}: ${message}; exiting with status ${code}"
else
echo "Error on or near line ${parent_lineno}; exiting with status ${code}"
fi
exit "${code}"
}
trap 'error ${LINENO}' ERR
...then, whenever you create a temporary file:
temp_foo="$(mktemp -t foobar.XXXXXX)"
tempfiles+=( "$temp_foo" )
and $temp_foo will be deleted on exit, and the current line number will be printed. (set -e will likewise give you exit-on-error behavior, though it comes with serious caveats and weakens code's predictability and portability).
You can either let the trap call error for you (in which case it uses the default exit code of 1 and no message) or call it yourself and provide explicit values; for instance:
error ${LINENO} "the foobar failed" 2
will exit with status 2, and give an explicit message.
That's a fine solution. I just wanted to add
set -e
as a rudimentary error mechanism. It will immediately stop your script if a simple command fails. I think this should have been the default behavior: since such errors almost always signify something unexpected, it is not really 'sane' to keep executing the following commands.
Reading all the answers on this page inspired me a lot.
So, here's my hint:
file content: lib.trap.sh
lib_name='trap'
lib_version=20121026
stderr_log="/dev/shm/stderr.log"
#
# TO BE SOURCED ONLY ONCE:
#
###~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~##
if test "${g_libs[$lib_name]+_}"; then
return 0
else
if test ${#g_libs[@]} == 0; then
declare -A g_libs
fi
g_libs[$lib_name]=$lib_version
fi
#
# MAIN CODE:
#
###~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~##
set -o pipefail # trace ERR through pipes
set -o errtrace # trace ERR through 'time command' and other functions
set -o nounset ## set -u : exit the script if you try to use an uninitialised variable
set -o errexit ## set -e : exit the script if any statement returns a non-true return value
exec 2>"$stderr_log"
###~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~##
#
# FUNCTION: EXIT_HANDLER
#
###~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~##
function exit_handler ()
{
local error_code="$?"
test $error_code == 0 && return;
#
# LOCAL VARIABLES:
# ------------------------------------------------------------------
#
local i=0
local regex=''
local mem=''
local error_file=''
local error_lineno=''
local error_message='unknown'
local lineno=''
#
# PRINT THE HEADER:
# ------------------------------------------------------------------
#
# Color the output if it's an interactive terminal
test -t 1 && tput bold; tput setf 4 ## red bold
echo -e "\n(!) EXIT HANDLER:\n"
#
# GETTING LAST ERROR OCCURRED:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #
#
# Read last file from the error log
# ------------------------------------------------------------------
#
if test -f "$stderr_log"
then
stderr=$( tail -n 1 "$stderr_log" )
rm "$stderr_log"
fi
#
# Managing the line to extract information:
# ------------------------------------------------------------------
#
if test -n "$stderr"
then
# Exploding stderr on :
mem="$IFS"
local shrunk_stderr=$( echo "$stderr" | sed 's/\: /\:/g' )
IFS=':'
local stderr_parts=( $shrunk_stderr )
IFS="$mem"
# Storing information on the error
error_file="${stderr_parts[0]}"
error_lineno="${stderr_parts[1]}"
error_message=""
for (( i = 3; i <= ${#stderr_parts[@]}; i++ ))
do
error_message="$error_message "${stderr_parts[$i-1]}": "
done
# Removing last ':' (colon character)
error_message="${error_message%:*}"
# Trim
error_message="$( echo "$error_message" | sed -e 's/^[ \t]*//' | sed -e 's/[ \t]*$//' )"
fi
#
# GETTING BACKTRACE:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #
_backtrace=$( backtrace 2 )
#
# MANAGING THE OUTPUT:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #
local lineno=""
regex='^([a-z]{1,}) ([0-9]{1,})$'
if [[ $error_lineno =~ $regex ]]
# The error line was found on the log
# (e.g. type 'ff' without quotes wherever)
# --------------------------------------------------------------
then
local row="${BASH_REMATCH[1]}"
lineno="${BASH_REMATCH[2]}"
echo -e "FILE:\t\t${error_file}"
echo -e "${row^^}:\t\t${lineno}\n"
echo -e "ERROR CODE:\t${error_code}"
test -t 1 && tput setf 6 ## white yellow
echo -e "ERROR MESSAGE:\n$error_message"
else
regex="^${error_file}\$|^${error_file}\s+|\s+${error_file}\s+|\s+${error_file}\$"
if [[ "$_backtrace" =~ $regex ]]
# The file was found on the log but not the error line
# (could not reproduce this case so far)
# ------------------------------------------------------
then
echo -e "FILE:\t\t$error_file"
echo -e "ROW:\t\tunknown\n"
echo -e "ERROR CODE:\t${error_code}"
test -t 1 && tput setf 6 ## white yellow
echo -e "ERROR MESSAGE:\n${stderr}"
# Neither the error line nor the error file was found on the log
# (e.g. type 'cp ffd fdf' without quotes wherever)
# ------------------------------------------------------
else
#
# The error file is the first on backtrace list:
# Exploding backtrace on newlines
mem=$IFS
IFS='
'
#
# Substring: I keep only the carriage return
# (others needed only for tabbing purpose)
IFS=${IFS:0:1}
local lines=( $_backtrace )
IFS=$mem
error_file=""
if test -n "${lines[1]}"
then
array=( ${lines[1]} )
for (( i=2; i<${#array[@]}; i++ ))
do
error_file="$error_file ${array[$i]}"
done
# Trim
error_file="$( echo "$error_file" | sed -e 's/^[ \t]*//' | sed -e 's/[ \t]*$//' )"
fi
echo -e "FILE:\t\t$error_file"
echo -e "ROW:\t\tunknown\n"
echo -e "ERROR CODE:\t${error_code}"
test -t 1 && tput setf 6 ## white yellow
if test -n "${stderr}"
then
echo -e "ERROR MESSAGE:\n${stderr}"
else
echo -e "ERROR MESSAGE:\n${error_message}"
fi
fi
fi
#
# PRINTING THE BACKTRACE:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #
test -t 1 && tput setf 7 ## white bold
echo -e "\n$_backtrace\n"
#
# EXITING:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #
test -t 1 && tput setf 4 ## red bold
echo "Exiting!"
test -t 1 && tput sgr0 # Reset terminal
exit "$error_code"
}
trap exit_handler EXIT # ! ! ! TRAP EXIT ! ! !
trap exit ERR # ! ! ! TRAP ERR ! ! !
###~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~##
#
# FUNCTION: BACKTRACE
#
###~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~##
function backtrace
{
local _start_from_=0
local params=( "$@" )
if (( "${#params[@]}" >= "1" ))
then
_start_from_="$1"
fi
local i=0
local first=false
while caller $i > /dev/null
do
if test -n "$_start_from_" && (( "$i" + 1 >= "$_start_from_" ))
then
if test "$first" == false
then
echo "BACKTRACE IS:"
first=true
fi
caller $i
fi
let "i=i+1"
done
}
return 0
Example of usage:
file content: trap-test.sh
#!/bin/bash
source 'lib.trap.sh'
echo "doing something wrong now .."
echo "$foo"
exit 0
Running:
bash trap-test.sh
Output:
doing something wrong now ..
(!) EXIT HANDLER:
FILE: trap-test.sh
LINE: 6
ERROR CODE: 1
ERROR MESSAGE:
foo: unassigned variable
BACKTRACE IS:
1 main trap-test.sh
Exiting!
As you can see from the screenshot below, the output is colored and the error message comes in the used language.
An equivalent alternative to "set -e" is
set -o errexit
It makes the meaning of the flag somewhat clearer than just "-e".
Random addition: to temporarily disable the flag, and return to the default (of continuing execution regardless of exit codes), just use
set +e
echo "commands run here returning non-zero exit codes will not cause the entire script to fail"
echo "false returns 1 as an exit code"
false
set -e
This precludes proper error handling mentioned in other responses, but is quick & effective (just like bash).
Inspired by the ideas presented here, I have developed a readable and convenient way to handle errors in bash scripts in my bash boilerplate project.
By simply sourcing the library, you get the following out of the box (i.e. it will halt execution on any error, as if using set -e thanks to a trap on ERR and some bash-fu):
There are some extra features that help handle errors, such as try and catch, or the throw keyword, that allows you to break execution at a point to see the backtrace. Plus, if the terminal supports it, it spits out powerline emojis, colors parts of the output for great readability, and underlines the method that caused the exception in the context of the line of code.
The downside is - it's not portable - the code works in bash, probably >= 4 only (but I'd imagine it could be ported with some effort to bash 3).
The code is separated into multiple files for better handling, but I was inspired by the backtrace idea from the answer above by Luca Borrione.
To read more or take a look at the source, see GitHub:
https://github.com/niieani/bash-oo-framework#error-handling-with-exceptions-and-throw