Windows DHCP Server - get notification when a non-AD joined device gets an IP address
Solution 1:
With much thanks to ErikE and the others here, I've gone down a path...I won't say it's the right path, but the Powershell script I've come up with does the trick.
The code is below if anyone wants it. Just run it manually pointing at each DHCP server or schedule it (again pointing to each DHCP server in the script).
What the script does:
- Gets lease information from the DHCP server (ipv4 leases)
- Outputs the leases to a csv file
- Reads back in that CSV file for querying AD
- Queries AD for the computer
- If not found outputs to a new txt file
- Creates a unique list final txt file from the one created in #5 above (since there can be dupes if the client registers more than once or with more than one adapter)
- emails the contents of the final output file to an admin
What you'll need:
The script uses the AD module (import-module activedirectory) so it is best run on an AD DC running DHCP. If this isn't the case for you, you can install the AD powershell module: http://blogs.msdn.com/b/rkramesh/archive/2012/01/17/how-to-add-active-directory-module-in-powershell-in-windows-7.aspx
You'll also need Quest's AD Powershell cmdlets found here: http://www.quest.com/powershell/activeroles-server.aspx . Install THESE BEFORE running the script or it will fail.
The script itself (sanitized, you'll need to setup some of the variables to suit your needs like the input file names, domain to connect to, dhcp server to connect to, email settings near the end, etc.):
# Get-nonADclientsOnDHCP.ps1
# Author : TheCleaner http://serverfault.com/users/7861/thecleaner with a big thanks for a lot of the lease grab code to Assaf Miron on code.google.com
# Description : This Script grabs the current leases on a Windows DHCP server, outputs it to a csv
# then takes that csv file as input and determines if the lease is from a non-AD joined computer. It then emails
# an administrator notification. Set it up on a schedule of your choosing in Task Scheduler.
# This helps non-802.1X shops keep track of rogue DHCP clients that aren't part of the domain.
#
# Input : leaselog.csv
# Output: Lease log = leaselog.csv
# Output: Rogue Clients with dupes = RogueClients.txt
# Output: Rogue Clients - unique = RogueClientsFinal.txt
$DHCP_SERVER = "PUT YOUR SERVER NAME OR IP HERE" # The DHCP Server Name
$LOG_FOLDER = "C:\DHCP" # A Folder to save all the Logs
# Create Log File Paths
$LeaseLog = $LOG_FOLDER+"\LeaseLog.csv"
#region Create Scope Object
# Create a New Object
$Scope = New-Object psobject
# Add new members to the Object
$Scope | Add-Member noteproperty "Address" ""
$Scope | Add-Member noteproperty "Mask" ""
$Scope | Add-Member noteproperty "State" ""
$Scope | Add-Member noteproperty "Name" ""
$Scope | Add-Member noteproperty "LeaseDuration" ""
# Create Each Member in the Object as an Array
$Scope.Address = @()
$Scope.Mask = @()
$Scope.State = @()
$Scope.Name = @()
$Scope.LeaseDuration = @()
#endregion
#region Create Lease Object
# Create a New Object
$LeaseClients = New-Object psObject
# Add new members to the Object
$LeaseClients | Add-Member noteproperty "IP" ""
$LeaseClients | Add-Member noteproperty "Name" ""
$LeaseClients | Add-Member noteproperty "Mask" ""
$LeaseClients | Add-Member noteproperty "MAC" ""
$LeaseClients | Add-Member noteproperty "Expires" ""
$LeaseClients | Add-Member noteproperty "Type" ""
# Create Each Member in the Object as an Array
$LeaseClients.IP = @()
$LeaseClients.Name = @()
$LeaseClients.MAC = @()
$LeaseClients.Mask = @()
$LeaseClients.Expires = @()
$LeaseClients.Type = @()
#endregion
#region Create Reserved Object
# Create a New Object
$LeaseReserved = New-Object psObject
# Add new members to the Object
$LeaseReserved | Add-Member noteproperty "IP" ""
$LeaseReserved | Add-Member noteproperty "MAC" ""
# Create Each Member in the Object as an Array
$LeaseReserved.IP = @()
$LeaseReserved.MAC = @()
#endregion
#region Define Commands
#Commad to Connect to DHCP Server
$NetCommand = "netsh dhcp server \\$DHCP_SERVER"
#Command to get all Scope details on the Server
$ShowScopes = "$NetCommand show scope"
#endregion
function Get-LeaseType( $LeaseType )
{
# Input : The Lease type in one Char
# Output : The Lease type description
# Description : This function translates a Lease type Char to it's relevant Description
Switch($LeaseType){
"N" { return "None" }
"D" { return "DHCP" }
"B" { return "BOOTP" }
"U" { return "UNSPECIFIED" }
"R" { return "RESERVATION IP" }
}
}
function Check-Empty( $Object ){
# Input : An Object with values.
# Output : A Trimmed String of the Object or '-' if it's Null.
# Description : Check the object if its null or not and return it's value.
If($Object -eq $null)
{
return "-"
}
else
{
return $Object.ToString().Trim()
}
}
function out-CSV ( $LogFile, $Append = $false) {
# Input : An Object with values, Boolean value if to append the file or not, a File path to a Log File
# Output : Export of the object values to a CSV File
# Description : This Function Exports all the Values and Headers of an object to a CSV File.
# The Object is recieved with the Input Const (Used with Pipelineing) or the $inputObject
Foreach ($item in $input){
# Get all the Object Properties
$Properties = $item.PsObject.get_properties()
# Create Empty Strings - Start Fresh
$Headers = ""
$Values = ""
# Go over each Property and get it's Name and value
$Properties | %{
$Headers += $_.Name + ","
$Values += $_.Value
}
# Output the Object Values and Headers to the Log file
If($Append -and (Test-Path $LogFile)) {
$Values | Out-File -Append -FilePath $LogFile -Encoding Unicode
}
else {
# Used to mark it as an Powershell Custum object - you can Import it later and use it
# "#TYPE System.Management.Automation.PSCustomObject" | Out-File -FilePath $LogFile
$Headers | Out-File -FilePath $LogFile -Encoding Unicode
$Values | Out-File -Append -FilePath $LogFile -Encoding Unicode
}
}
}
#region Get all Scopes in the Server
# Run the Command in the Show Scopes var
$AllScopes = Invoke-Expression $ShowScopes
# Go over all the Results, start from index 5 and finish in last index -3
for($i=5;$i -lt $AllScopes.Length-3;$i++)
{
# Split the line and get the strings
$line = $AllScopes[$i].Split("-")
$Scope.Address += Check-Empty $line[0]
$Scope.Mask += Check-Empty $line[1]
$Scope.State += Check-Empty $line[2]
# Line 3 and 4 represent the Name and Comment of the Scope
# If the name is empty, try taking the comment
If (Check-Empty $line[3] -eq "-") {
$Scope.Name += Check-Empty $line[4]
}
else { $Scope.Name += Check-Empty $line[3] }
}
# Get all the Active Scopes IP Address
$ScopesIP = $Scope | Where { $_.State -eq "Active" } | Select Address
# Go over all the Adresses to collect Scope Client Lease Details
Foreach($ScopeAddress in $ScopesIP.Address){
# Define some Commands to run later - these commands need to be here because we use the ScopeAddress var that changes every loop
#Command to get all Lease Details from a specific Scope - when 1 is amitted the output includes the computer name
$ShowLeases = "$NetCommand scope "+$ScopeAddress+" show clients 1"
#Command to get all Reserved IP Details from a specific Scope
$ShowReserved = "$NetCommand scope "+$ScopeAddress+" show reservedip"
#Command to get all the Scopes Options (Including the Scope Lease Duration)
$ShowScopeDuration = "$NetCommand scope "+$ScopeAddress+" show option"
# Run the Commands and save the output in the accourding var
$AllLeases = Invoke-Expression $ShowLeases
$AllReserved = Invoke-Expression $ShowReserved
$AllOptions = Invoke-Expression $ShowScopeDuration
# Get the Lease Duration from Each Scope
for($i=0; $i -lt $AllOptions.count;$i++)
{
# Find a Scope Option ID number 51 - this Option ID Represents the Scope Lease Duration
if($AllOptions[$i] -match "OptionId : 51")
{
# Get the Lease Duration from the Specified line
$tmpLease = $AllOptions[$i+4].Split("=")[1].Trim()
# The Lease Duration is recieved in Ticks / 10000000
$tmpLease = [int]$tmpLease * 10000000; # Need to Convert to Int and Multiply by 10000000 to get Ticks
# Create a TimeSpan Object
$TimeSpan = New-Object -TypeName TimeSpan -ArgumentList $tmpLease
# Calculate the $tmpLease Ticks to Days and put it in the Scope Lease Duration
$Scope.LeaseDuration += $TimeSpan.TotalDays
# After you found one Exit the For
break;
}
}
# Get all Client Leases from Each Scope
for($i=8;$i -lt $AllLeases.Length-4;$i++)
{
# Split the line and get the strings
$line = [regex]::split($AllLeases[$i],"\s{2,}")
# Check if you recieve all the lines that you need
$LeaseClients.IP += Check-Empty $line[0]
$LeaseClients.Mask += Check-Empty $line[1].ToString().replace("-","").Trim()
$LeaseClients.MAC += $line[2].ToString().substring($line[2].ToString().indexOf("-")+1,$line[2].toString().Length-1).Trim()
$LeaseClients.Expires += $(Check-Empty $line[3]).replace("-","").Trim()
$LeaseClients.Type += Get-LeaseType $(Check-Empty $line[4]).replace("-","").Trim()
$LeaseClients.Name += Check-Empty $line[5]
}
# Get all Client Lease Reservations from Each Scope
for($i=7;$i -lt $AllReserved.Length-5;$i++)
{
# Split the line and get the strings
$line = [regex]::split($AllReserved[$i],"\s{2,}")
$LeaseReserved.IP += Check-Empty $line[0]
$LeaseReserved.MAC += Check-Empty $line[2]
}
}
#endregion
#region Create a Temp Scope Object
# Create a New Object
$tmpScope = New-Object psobject
# Add new members to the Object
$tmpScope | Add-Member noteproperty "Address" ""
$tmpScope | Add-Member noteproperty "Mask" ""
$tmpScope | Add-Member noteproperty "State" ""
$tmpScope | Add-Member noteproperty "Name" ""
$tmpScope | Add-Member noteproperty "LeaseDuration" ""
#endregion
#region Create a Temp Lease Object
# Create a New Object
$tmpLeaseClients = New-Object psObject
# Add new members to the Object
$tmpLeaseClients | Add-Member noteproperty "IP" ""
$tmpLeaseClients | Add-Member noteproperty "Name" ""
$tmpLeaseClients | Add-Member noteproperty "Mask" ""
$tmpLeaseClients | Add-Member noteproperty "MAC" ""
$tmpLeaseClients | Add-Member noteproperty "Expires" ""
$tmpLeaseClients | Add-Member noteproperty "Type" ""
#endregion
#region Create a Temp Reserved Object
# Create a New Object
$tmpLeaseReserved = New-Object psObject
# Add new members to the Object
$tmpLeaseReserved | Add-Member noteproperty "IP" ""
$tmpLeaseReserved | Add-Member noteproperty "MAC" ""
#endregion
# Go over all the Client Lease addresses and export each detail to a temporary var and out to the log file
For($l=0; $l -lt $LeaseClients.IP.Length;$l++)
{
# Get all Scope details to a temp var
$tmpLeaseClients.IP = $LeaseClients.IP[$l] + ","
$tmpLeaseClients.Name = $LeaseClients.Name[$l] + ","
$tmpLeaseClients.Mask = $LeaseClients.Mask[$l] + ","
$tmpLeaseClients.MAC = $LeaseClients.MAC[$l] + ","
$tmpLeaseClients.Expires = $LeaseClients.Expires[$l] + ","
$tmpLeaseClients.Type = $LeaseClients.Type[$l]
# Export with the Out-CSV Function to the Log File
$tmpLeaseClients | out-csv $LeaseLog -append $true
}
#Continue on figuring out if the DHCP lease clients are in AD or not
#Import the Active Directory module
import-module activedirectory
#import Quest AD module
Add-PSSnapin Quest.ActiveRoles.ADManagement
#connect to AD
Connect-QADService PUTTHEFQDNOFYOURDOMAINHERE_LIKE_DOMAIN.LOCAL | Out-Null
# get input CSV
$leaselogpath = "c:\DHCP\LeaseLog.csv"
Import-csv -path $leaselogpath |
#query AD for computer name based on csv log
foreach-object `
{
$NameResult = Get-QADComputer -DnsName $_.Name
If ($NameResult -eq $null) {$RogueSystem = $_.Name}
$RogueSystem | Out-File C:\DHCP\RogueClients.txt -Append
$RogueSystem = $null
}
Get-Content C:\DHCP\RogueClients.txt | Select-Object -Unique | Out-File C:\DHCP\RogueClientsFinal.txt
Remove-Item C:\DHCP\RogueClients.txt
#send email to netadmin
$smtpserver = "SMTP SERVER IP"
$from="[email protected]"
$to="[email protected]"
$subject="Non-AD joined DHCP clients"
$body= (Get-Content C:\DHCP\RogueClientsFinal.txt) -join '<BR> <BR>'
$mailer = new-object Net.Mail.SMTPclient($smtpserver)
$msg = new-object Net.Mail.MailMessage($from,$to,$subject,$body)
$msg.IsBodyHTML = $true
$mailer.send($msg)
Hope that helps someone else!
Solution 2:
OK, I´m not sure I´m following etiquette here but am posting a second answer instead of editing my previous one, as it did contain some info which may be of use to somebody even if proven irrelevant to this case. If that makes me an idiot in this forum feel free to inform me of my erroneous ways.
The problem is divided into several parts, here are suggestions for the ones I find most interesting. Without examples from the log this is the best I can do, so it's just suggestions not solutions.
To parse the log use get-content with the -wait parameter. For my use case it's enough to find an error in an error log.
This is what worked for my own use case, forgive the formatting:
get-content E:\temp13\log.txt -tail(1) -wait | where {$_ -match "ERROR"} |
foreach {
send-mailmessage `
-port 25 `
-smtpserver my.mail.server `
-from [email protected] `
-to [email protected] `
-subject "test logmonitor" `
-body "ERROR found: $_" `
}
Instead of the $_ -match "ERROR" you would need to separate the log ID field and the computer name somehow. I'm not sure how to go about that in the best way right now, but since where-object -match gives regex support I guess that could be an option. You could also begin by storing the $_ variable in another new variable, to be able to pick it up at your convenience later in the pipeline, inside nested foreach loops etc.
Assuming you can get at the computername, I guess the get-adcomputer cmdlet would be your simplest way of querying your AD (import-module activedirectory), and I guess on error send mail?
Using the import-csv would of course be far more elegant in your case, but I'm not aware of any way of tailing it (if anybody happens to read this and knows a trick up that alley then please, please share).
Solution 3:
Under the assumption that you are certain of the Event ID, and that no other events log to this ID in the DHCP log but the ones you are interested in, push is indeed an option.
1) Open the Server Manager, go to the DHCP log in Event Viewer.
2) Find a representative entry which you wish to attach your action to. Select it and right click.
3) Choose "Attach Task To This Event".
4) The Task Creation Wizard opens, take it away from there...
There is actually an explicit email option, but if you need more logic than that you are of course free to use the start-a-program option to fire up powershell.exe and attach a script to it. There are plenty of excellent googleable howtos on how to let the Task Manager run powershell scripts if you need guidance.
The straight away alternative I see is to use pull by parsing the Event Log using powershell at scheduled intervals. "The Microsoft Scripting Guy", aka Ed Wilson has written some awesome blog posts on how to parse the Event Log using the cmdlets available in the different versions of powershell, so taking his blog as a starting point would be my suggestion.
As for actual cmdlets I don´t have the time right now to pull out my stash of handy snippets, but will look in again in a day or two and may contribute if nobody else has pitched in with some well chosen ones, or you haven´t solved it all by yourself :-)
Solution 4:
While this doesn't address your desired solution, an option that may achieve your goal is to utilize arpwatch(link) to notify you when a new (previously unseen) host is seen on the network.
A Windows alternative to arpwatch appears to be decaffeinatid but I've never used it so can't speak for it good or bad.