How do I daemonize an arbitrary script in unix?

I'd like a daemonizer that can turn an arbitrary, generic script or command into a daemon.

There are two common cases I'd like to deal with:

I have a script that should run forever. If it ever dies (or on reboot), restart it. Don't let there ever be two copies running at once (detect if a copy is already running and don't launch it in that case).
I have a simple script or command line command that I'd like to keep executing repeatedly forever (with a short pause between runs). Again, don't allow two copies of the script to ever be running at once.

Of course it's trivial to write a "while(true)" loop around the script in case 2 and then apply a solution for case 1, but a more general solution will just solve case 2 directly since that applies to the script in case 1 as well (you may just want a shorter or no pause if the script is not intended to ever die (of course if the script really does never die then the pause doesn't actually matter)).

Note that the solution should not involve, say, adding file-locking code or PID recording to the existing scripts.

More specifically, I'd like a program "daemonize" that I can run like

% daemonize myscript arg1 arg2

or, for example,

% daemonize 'echo `date` >> /tmp/times.txt'

which would keep a growing list of dates appended to times.txt. (Note that if the argument(s) to daemonize is a script that runs forever as in case 1 above, then daemonize will still do the right thing, restarting it when necessary.) I could then put a command like above in my .login and/or cron it hourly or minutely (depending on how worried I was about it dying unexpectedly).

NB: The daemonize script will need to remember the command string it is daemonizing so that if the same command string is daemonized again it does not launch a second copy.

Also, the solution should ideally work on both OS X and linux but solutions for one or the other are welcome.

EDIT: It's fine if you have to invoke it with sudo daemonize myscript myargs.

(If I'm thinking of this all wrong or there are quick-and-dirty partial solutions, I'd love to hear that too.)

PS: In case it's useful, here's a similar question specific to python.

And this answer to a similar question has what appears to be a useful idiom for a quick-and-dirty demonizing of an arbitrary script:

Solution 1:

You can daemonize any executable in Unix by using nohup and the & operator:

nohup yourScript.sh script args&

The nohup command allows you to shut down your shell session without it killing your script, while the & places your script in the background so you get a shell prompt to continue your session. The only minor problem with this is standard out and standard error both get sent to ./nohup.out, so if you start several scripts in this manor their output will be intertwined. A better command would be:

nohup yourScript.sh script args >script.out 2>script.error&

This will send standard out to the file of your choice and standard error to a different file of your choice. If you want to use just one file for both standard out and standard error you can us this:

nohup yourScript.sh script args >script.out 2>&1 &

The 2>&1 tells the shell to redirect standard error (file descriptor 2) to the same file as standard out (file descriptor 1).

To run a command only once and restart it if it dies you can use this script:

#!/bin/bash

if [[ $# < 1 ]]; then
    echo "Name of pid file not given."
    exit
fi

# Get the pid file's name.
PIDFILE=$1
shift

if [[ $# < 1 ]]; then
    echo "No command given."
    exit
fi

echo "Checking pid in file $PIDFILE."

#Check to see if process running.
PID=$(cat $PIDFILE 2>/dev/null)
if [[ $? = 0 ]]; then
    ps -p $PID >/dev/null 2>&1
    if [[ $? = 0 ]]; then
        echo "Command $1 already running."
        exit
    fi
fi

# Write our pid to file.
echo $$ >$PIDFILE

# Get command.
COMMAND=$1
shift

# Run command until we're killed.
while true; do
    $COMMAND "$@"
    sleep 10 # if command dies immediately, don't go into un-ctrl-c-able loop
done

The first argument is the name of the pid file to use. The second argument is the command. And all other arguments are the command's arguments.

If you name this script restart.sh this is how you would call it:

nohup restart.sh pidFileName yourScript.sh script args >script.out 2>&1 &

Solution 2:

I apologise for the long answer (please see comments about how my answer nails the spec). I'm trying to be comprehensive, so you have as good of a leg up as possible. :-)

If you are able to install programs (have root access), and are willing to do one-time legwork to set up your script for daemon execution (i.e., more involved than simply specifying the command-line arguments to run on the command line, but only needing to be done once per service), I have a way that's more robust.

It involves using daemontools. The rest of the post describes how to set up services using daemontools.

Initial setup

Follow the instructions in How to install daemontools. Some distributions (e.g., Debian, Ubuntu) already have packages for it, so just use that.
Make a directory called /service. The installer should have already done this, but just verify, or if installing manually. If you dislike this location, you can change it in your svscanboot script, although most daemontools users are used to using /service and will get confused if you don't use it.
If you're using Ubuntu or another distro that doesn't use standard init (i.e., doesn't use /etc/inittab), you will need to use the pre-installed inittab as a base for arranging svscanboot to be called by init. It's not hard, but you need to know how to configure the init that your OS uses. svscanboot is a script that calls svscan, which does the main work of looking for services; it's called from init so init will arrange to restart it if it dies for any reason.

Per-service setup

Each service needs a service directory, which stores housekeeping information about the service. You can also make a location to house these service directories so they're all in one place; usually I use /var/lib/svscan, but any new location will be fine.
I usually use a script to set up the service directory, to save lots of manual repetitive work. e.g.,
```
sudo mkservice -d /var/lib/svscan/some-service-name -l -u user -L loguser "command line here"
```
where some-service-name is the name you want to give your service, user is the user to run that service as, and loguser is the user to run the logger as. (Logging is explained in just a little bit.)
Your service has to run in the foreground. If your program backgrounds by default, but has an option to disable that, then do so. If your program backgrounds without a way to disable it, read up on fghack, although this comes at a trade-off: you can no longer control the program using svc.
Edit the run script to ensure it's doing what you want it to. You may need to place a sleep call at the top, if you expect your service to exit frequently.
When everything is set up right, create a symlink in /service pointing to your service directory. (Don't put service directories directly within /service; it makes it harder to remove the service from svscan's watch.)

Logging

The daemontools way of logging is to have the service write log messages to standard output (or standard error, if you're using scripts generated with mkservice); svscan takes care of sending log messages to the logging service.
The logging service takes the log messages from standard input. The logging service script generated by mkservice will create auto-rotated, timestamped log files in the log/main directory. The current log file is called current.
The logging service can be started and stopped independently of the main service.
Piping the log files through tai64nlocal will translate the timestamps into a human-readable format. (TAI64N is a 64-bit atomic timestamp with a nanosecond count.)

Controlling services

Use svstat to get the status of a service. Note that the logging service is independent, and has its own status.
You control your service (start, stop, restart, etc.) using svc. For example, to restart your service, use svc -t /service/some-service-name; -t means "send SIGTERM".
Other signals available include -h (SIGHUP), -a (SIGALRM), -1 (SIGUSR1), -2 (SIGUSR2), and -k (SIGKILL).
To down the service, use -d. You can also prevent a service from automatically starting at bootup by creating a file named down in the service directory.
To start the service, use -u. This is not necessary unless you've downed it previously (or set it up not to auto-start).
To ask the supervisor to exit, use -x; usually used with -d to terminate the service as well. This is the usual way to allow a service to be removed, but you have to unlink the service from /service first, or else svscan will restart the supervisor. Also, if you created your service with a logging service (mkservice -l), remember to also exit the logging supervisor (e.g., svc -dx /var/lib/svscan/some-service-name/log) before removing the service directory.

Summary

Pros:

daemontools provides a bulletproof way to create and manage services. I use it for my servers, and I highly recommend it.
Its logging system is very robust, as is the service auto-restart facility.
Because it starts services with a shell script that you write/tune, you can tailor your service however you like.
Powerful service control tools: you can send most any signal to a service, and can bring services up and down reliably.
Your services are guaranteed a clean execution environment: they will execute with the same environment, process limits, etc., as what init provides.

Cons:

Each service takes a bit of setup. Thankfully, this only needs doing once per service.
Services must be set up to run in the foreground. Also, for best results, they should be set up to log to standard output/standard error, rather than syslog or other files.
Steep learning curve if you're new to the daemontools way of doing things. You have to restart services using svc, and cannot run the run scripts directly (since they would then not be under the control of the supervisor).
Lots of housekeeping files, and lots of housekeeping processes. Each service needs its own service directory, and each service uses one supervisor process to auto-restart the service if it dies. (If you have many services, you will see lots of supervise processes in your process table.)

In balance, I think daemontools is an excellent system for your needs. I welcome any questions about how to set it up and maintain it.

Solution 3:

You should have a look at daemonize. It allows to detect second copy (but it uses file locking mechanism). Also it works on different UNIX and Linux distributions.

If you need to automatically start your application as daemon, then you need to create appropriate init-script.

You can use the following template:

#!/bin/sh
#
# mydaemon     This shell script takes care of starting and stopping
#               the <mydaemon>
#

# Source function library
. /etc/rc.d/init.d/functions


# Do preliminary checks here, if any
#### START of preliminary checks #########


##### END of preliminary checks #######


# Handle manual control parameters like start, stop, status, restart, etc.

case "$1" in
  start)
    # Start daemons.

    echo -n $"Starting <mydaemon> daemon: "
    echo
    daemon <mydaemon>
    echo
    ;;

  stop)
    # Stop daemons.
    echo -n $"Shutting down <mydaemon>: "
    killproc <mydaemon>
    echo

    # Do clean-up works here like removing pid files from /var/run, etc.
    ;;
  status)
    status <mydaemon>

    ;;
  restart)
    $0 stop
    $0 start
    ;;

  *)
    echo $"Usage: $0 {start|stop|status|restart}"
    exit 1
esac

exit 0

Solution 4:

I think you may want to try start-stop-daemon(8). Check out scripts in /etc/init.d in any Linux distro for examples. It can find started processes by command line invoked or PID file, so it matches all your requirements except being a watchdog for your script. But you can always start another daemon watchdog script that just restarts your script if necessary.