Why would I get an electric shock from a VGA cable connected to an LCD monitor?

While arranging cables tonight to prepare to plant a new workstation, I got an electric shock from the VGA cable (that was hooked up to a seemingly good, yet older LCD monitor).

Of course, when the monitor was powered off, it didn't happen, but when we plugged it back in, I got the same jolt, and decided to trade monitors before electrifying a brand new workstation.

Does anyone know exactly what goes wrong inside an LCD monitor to cause this? I know older CRTs were shock-worthy, but I never expected it from newer technology.

There's an electrical fault in the monitor. I hope it's under warranty.

It is NOT the signal for the picture, which is extremely low voltage and high frequency and cannot be felt. It's probably a short in the monitor which has put real voltage on a cable meant only to carry a signal. Unplug it, leave it unplugged, and either get it fixed or dispose of it.

Nothing to do with "new technology" here--the problem isn't in the technology, it's a wire making contact with the wrong part.

but I never expected it from newer technology.

Why not?

Somehow the signals needs to be transferred from a to b, in order to do that they need energy of some sort. Electricity is the way to go..

Wherever Electricity comes into play, there always is a chance to get shocked, however mild or severe.

In order not to be shocked, Electricity need to run into the earth, thus the technical term "to ground". If you get shocked it's mostly due to faulty grounding.

Faulty grounding results in YOU being the medium it (the electricity) needs to run into the ground (a complete circuit), thus shocking you.