Garbage in primus with nvidia bumblebee on Trusty

Use GitHub retrieve method to check your specs.

$ lspci -vnn | grep '\''[030[02]\]'
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller])
08:00.0 3D controller [0302]: NVIDIA Corporation GK208M [GeForce GT 740M] [10de:1292] (rev a1)

• Notice the notation 08:00.0 with a single dote.

Only laptops have these kind of nVidia Optimus card, so this project won't apply to desktops (for now). Cards from the 4xxM and newer series are all Optimus-enabled. The M stands for "Mobile". But having a 4xxM card isn't enough to be sure that you're having an Optimus laptop. There must also be an integrated video controller in your processor. To check that, run this command in a [terminal][1]:

Ubuntu way to go with Bumblebee (Wiki)

• Basic Setup for 12.04 - 13.04

you need to purge the ppa if you've installed it.

• Basic_Setup_for_13.10_and_later

Terminal on, and enter the commands below:

-- UbuntuWiki instructions

1. Enable the Universe and Multiverse repositories - you need to do this to allow the bumblebee and nvidia packages respectively to be installed.

2. sudo apt-get install bumblebee bumblebee-nvidia primus linux-headers-generic

3. Reboot

now

Fist make sure nvidia-current version is 304 is really cool.

After installation--

$ ls -l /etc/bumblebee/
-rw-r--r-- 1 root root 2957 Dez  1 00:38 bumblebee.conf
drwxr-xr-x 2 root root 4096 Nov 30 23:57 xorg.conf.d
-rw-r--r-- 1 root root  513 Dez  1 00:37 xorg.conf.nouveau
-rw-r--r-- 1 root root 1380 Dez  1 00:37 xorg.conf.nvidia

REMEMBER 08:00.0?

$ cat /etc/bumblebee/xorg.conf.n*
$ view /etc/bumblebee/xorg.conf.nouveau # and
$ view /etc/bumblebee/xorg.conf.nvidia  # and change the last dot in

BusID "PCI:08:00.0"

Next:

 $ view /etc/bumblebee/bumblebee.conf
 [bumblebeed]
 VirtualDisplay=:8       # refers to PCI:08:00.0, the 1st left 0 is ignored
 KeepUnusedXServer=false
 ServerGroup=bumblebee
 TurnCardOffAtExit=false
 NoEcoModeOverride=false
 Driver=nvidia           # changed
 XorgConfDir=/etc/bumblebee/xorg.conf.d

 [optirun]
 Bridge=auto
 VGLTransport=proxy
 PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
 AllowFallbackToIGC=false

 [driver-nvidia]
 KernelDriver=nvidia-current
 PMMethod=bbswitch       # changed
 LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
 XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
 XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

 [driver-nouveau]
 KernelDriver=nouveau
 PMMethod=auto
 XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Wanning: I removed the original comments (intrunctions) as a backup. Do it too or browse the file and change the values without touching comments.

Test primus

 DRI_PRIME=0 glxgears -info | grep "GL_VENDOR"
 DRI_PRIME=1 glxgears -info | grep "GL_VENDOR"

 $ DRI_PRIME=:8 glxgears # and finaly do it

After that follow the information provided in--

Example_update_to_nvidia-319_driver at UbuntuWiki.

You will adjust the driver version and paths too in the file above.

Works very well to me.

I would recommend using "Nvidia Prime Indicator".

First Remove Bumblebee You need to get rid of Bumblebee and the Nvidia driver. Bumblebee does not run well on my Optimus machine, same problems, get Prime indicator. Also the nvidia-331-updates will be installed with sudo apt-get upgrade after this install.

This is my guide from another thread, try it, I feel it could work.

Carefull on next steps, do only the necessary steps:

To remove and purge bumblebee run terminal (if you got black screen, press Ctrl+Alt+F2) and type:

sudo apt-get remove --purge bumblebee

To install Prime run all 3 rows of command:

sudo add-apt-repository ppa:nilarimogard/webupd8 &&
sudo apt-get update && sudo apt-get install prime-indicator

It should work out from the box with Prime Indicator.

If not, purge them all with:

sudo apt-get remove 'nvidia.*' prime-indicator && sudo apt-get autoremove

and start from scratch with:

sudo apt-get install nvidia-331 indicator-prime

When you get it work, install mesa-utils which allows us to recognize the GPUs:

sudo apt-get install mesa-utils

You have Nvidia Optimus, next steps for Intel driver:

Switch to Intel GPU from Prime Indicator and get Intel Graphics Installer .deb file, install it via Software Center, find the Installer in Dash and run it to update your Intel 4000 with latest drivers.

EDIT: After installing the Intel package, IF sudo apt-get update fails on download.01.org public key, run this in terminal:

This will add the correct Key.

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys A902DDA375E52366