How can I get the mount path of a USB device on OSX?
Solution 1:
The following commands show you information about mounted volumes:
- The well-known Unix
mount
, showing e.g./dev/disk5s3
mounted at/Volumes/Foo
-
diskutil list
shows an overview of all disks and volumes -
diskutil info /dev/disk5s3
shows information about that volume, including aVolume UUID
that can be used to uniquely identify that volume.
You can query diskutil info
by using the volume's UUID:
$ diskutil info DEC8759E-F77D-3EAE-B3EB-B6438F1AA428 | grep 'Mount Point'
Mount Point: /Volumes/DroboOne
Sample command output on my system:
$ mount
/dev/disk1 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
localhost:/bNqIvVr1ZdFBdf19Io81Q4 on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
/dev/disk4 on /Volumes/MyBook (hfs, local, nodev, nosuid, journaled)
/dev/disk5s3 on /Volumes/DroboOne (hfs, local, nodev, nosuid, journaled, noowners)
/dev/disk7s3 on /Volumes/DroboTwo (hfs, local, nodev, nosuid, journaled, noowners)
/dev/disk6s3 on /Volumes/DroboThree (hfs, local, nodev, nosuid, journaled, noowners)
$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_CoreStorage 240.0 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Servus10 HD *239.7 GB disk1
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *3.0 TB disk2
1: EFI 209.7 MB disk2s1
2: Apple_CoreStorage 3.0 TB disk2s2
3: Apple_Boot Boot OS X 134.2 MB disk2s3
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS MyBook *3.0 TB disk4
/dev/disk5
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *2.2 TB disk5
1: Apple_partition_map 32.3 KB disk5s1
2: Apple_HFS DroboOne 2.2 TB disk5s3
/dev/disk6
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *2.2 TB disk6
1: Apple_partition_map 32.3 KB disk6s1
2: Apple_HFS DroboThree 2.2 TB disk6s3
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *2.2 TB disk7
1: Apple_partition_map 32.3 KB disk7s1
2: Apple_HFS DroboTwo 2.2 TB disk7s3
$ diskutil info /dev/disk5s3
Device Identifier: disk5s3
Device Node: /dev/disk5s3
Part of Whole: disk5
Device / Media Name: Untitled
Volume Name: DroboOne
Escaped with Unicode: DroboOne
Mounted: Yes
Mount Point: /Volumes/DroboOne
Escaped with Unicode: /Volumes/DroboOne
File System Personality: Journaled HFS+
Type (Bundle): hfs
Name (User Visible): Mac OS Extended (Journaled)
Journal: Journal size 172032 KB at offset 0x4001000
Owners: Disabled
Partition Type: Apple_HFS
OS Can Be Installed: No
Media Type: Generic
Protocol: FireWire
SMART Status: Not Supported
Volume UUID: DEC8759E-F77D-3EAE-B3EB-B6438F1AA428
Total Size: 2.2 TB (2198888927232 Bytes) (exactly 4294704936 512-Byte-Blocks)
Volume Free Space: 169.4 GB (169412173824 Bytes) (exactly 330883152 512-Byte-Blocks)
Device Block Size: 512 Bytes
Read-Only Media: No
Read-Only Volume: No
Ejectable: Yes
Whole: No
Internal: No
Solution 2:
What about this command:
df -lH | grep "Filesystem"; df -lH | grep "/Volumes/*"
In the column "Mounted on" you get all the Mount Points of all devices mounted on "/Volumes"
, which in my case are almost always USB devices ;-)
The grep
commands basically skip the hard drive which is mounted on "/"
.
In the terminal of my OSX Snow Leopard, I use it for quick overview of the Mount Points of my currently connected USB Devices. If you are only interested in Mount Points and not all the other parameters as UUID etc., this would be in my opinion the more straight forward way rather than "diskutil"
with all its information.