How To Set Up Apache Virtual Hosts on XAMPP (Windows) [closed]

Solution 1:

##Full guideline to make VHOST (Virtual Host) on XAMPP/WAMP

Note: To start with, the only difference for this guideline, between XAMPP and WAMP or other Apache packages for Windows, is question where those packages are installed on your computer.

Introduction: vhost (virtual host) is a great solution if you intend to develop many independent project in php and keep them isolated from each others, like:

• Project 1 is based on php and has local url address php.localhost
• Project 2 is a Laravel project with url laravel.localhost
• Project 3 is a Codeigniter with url codeigniter.localhost
• Project 4 is a WordPress with url wordpress.localhost

You are expected to have installed the latest version of XAMPP/WAMP. Btw, in my case, I have only installed Apache and MySQL.

*Note: By default, most web servers will uses port 80 as default port, in some situation if you have another web server installed like (Microsoft IIS), it uses port 80 as well OR in other cases SKYPE does also some times use port 80 like it is the case for some in Windows 8/10 for some users, in that case you can do two thing’s

• Change your Apache port to port 8080, 8081 etc. or some other free ports (note: 8080 can some times also give some problems)
• OR Change your others software/IIS port and keep Apache to default port 80 in case of Skype, just kill the Skype app and restart it after installing Apache on port 80, Skype will automatically get new port.

I have chosen to change my Apache to port 8080.

Note:

• For next section, we need to use text editor like notepad or regular IDE. I used sublime text editor.
  
• If you keep Apache to default port 80, skip this part and move on to Virtual hosts

Change XAMPP/WAMP port (only if necessary) if left default, then jump to Setting virtual host

Step 1. Edit httpd.conf

Click on Config -> Apache (httpd.conf) Or you find the file here C:\XAMPP\apache\conf\httpd.conf, C:\XAMPP\apache2\conf\httpd.conf, C:\Bitnami\wampstack\apache\conf\httpd.conf or C:\Bitnami\wampstack\apache2\conf\httpd.conf or similar location.

Change the line with

Listen 80

To 8080 or other, free ports.

Listen 8080

While we have httpd.conf file open we need to ensure that httpd-vhosts.conf is included: Include conf/extra/httpd-vhosts.conf

Virtual hosts

Note: By default server documents are locate on C:\XAMPP\htdocs or C:\Bitnami\wampstack\apache2\htdocs that’s fine if you have only one project or many small test files. However, if you need to develop many projects then it suggested separating them by virtual host, as mentioned earlier.

Step 2. Setting Virtual host

1. Create a folder for your projects; I have create one in c:\vhost you can call it projects etc.
2. In c:\vhost folder we create a sub-folder domain1 or project1 or any other, it is up to you (c:\vhost\project1)
3. Open httpd-vhosts.conf file C:\XAMPP\apache\conf\extra\httpd-vhosts.conf Add following code in line depending on how many vhost you want to create:

<Directory C:/vhost>
    AllowOverride All
    Require all granted
</Directory>

#this is the default address of XAMPP    
<VirtualHost *:8080>
    DocumentRoot "C:/XAMPP/htdocs/"
    ServerName localhost
</VirtualHost>

#this is the first vhost address in XAMPP
<VirtualHost *:8080>
    DocumentRoot "C:/vhost/project1/"
    ServerName php.localhost
    SetEnv NS_ENV variable_value
</VirtualHost>

#this is the second vhost address in XAMPP for project like Laravel
<VirtualHost *:8080>
    DocumentRoot "C:/vhost/Laravel-Blog/public"
    ServerName laravel.localhost
</VirtualHost>

etc

Note: If you work on Laravel projects you can create unlimited Laravel projects as well as other frameworks like codeigniter, Yii, etc., the point is to have your Laravel project/s on c:\vhost\laravel1, c:\vhost\laravel2 etc and make c:\vhost\laravel1\public as DocumentRoot etc as showed before. Each Laravel project will have own VirtualHost URL.

Save and close the file

Some additional information and notes:

• If port is remain default 80 then the URL address will be localhost
• If port is remain default 80 then the the VirtualHost tag should be changed to <VirtualHost *:80>
• If port is changed to 8080, the URL address will be localhost:8080
• And the vhost URL address could look like this project1.localhost:8080 etc
• You can add unlimited projects and virtual host like this way.

We are not ready yet, read more.

Step 3. Edit Windows Host file

1. Stop Apache and MySQL services from XAMPP/WAMP.
2. Open hosts file in C:\windows\system32\drivers\etc you need Administrator privilege to edit the file. I suggest to edit the file directly with Sublime text editor.
3. Add 127.0.0.1 project1.localhost at the end of the file, Save and close the file.

127.0.0.1       localhost
127.0.0.1       php.localhost
127.0.0.1       laravel.localhost
127.0.0.1       codeigniter.localhost
127.0.0.1       wordpress.localhost
127.0.0.1       laravel2.localhost
etc. those are just examples

save the file

Final Step. Start/Re-start your Apache and MySQL again.

Note: Under you development process you might face problem having cache on, because you can risk updating some thing in Laravel and it won't appear in your browser. Therefore you might need to disable php cache under development process in your local environment.

Open file php.ini under php folder in your Apache (XAMPP or WAMP) folder and change opcache.enable to 0 so it looks like this:

[opcache]
zend_extension=php_opcache.dll
; Determines if Zend OPCache is enabled
opcache.enable=0

Addition (Alternative solution)

Important: The following solution is not suitable to test Restful Api, canvas, heavy solutions, etc.it might give you some headaches, I would suggest virtual host solution with port 80 as default.

It is possible to deploy temporary Virtual Server with out necessarily configuring XAMPP/WAMP Virtual Host, start CMD console and run following php command:

php -S localhost:8001 -t c:\vhost\Laravel-Project\public

• Port 8001 can be change to any available port number and be sure not conflicting with other software ports.
• c:\vhost\Laravel... path should be changed to whatever your project path.
• It is possible to start multiple servers but should have different port numbers.

In your browser you need only to write

http://localhost:8001/

Note on 403 Access forbidden error

If you get a 403 Access forbidden error when you browse to your site, you may need to add this to your httpd.conf file:

<Directory path_to_dir>
    AllowOverride none
    Require all granted
</Directory>

Solution 2:

You can make your localhost to point to different folders on different port numbers. Follow these simple steps:

Step 1: Make your apache to listen to multiple ports. Go to C:\xampp\apache\conf\httpd.conf and search for the key word Listen you can see something like this Listen 80. Now tell your apache to listen to multiple ports, replace that with below content

• Listen 80
• Listen 8001
• Listen 8002

Step 2: Now go to “C:\xampp\apache\conf\extra\httpd-vhosts.conf”, this is the actual player. At the end of the file you can specify something like this below:

DocumentRoot "C:/xampp/htdocs/project1" ServerName localhost:8001

DocumentRoot "C:/xampp/htdocs/project2" ServerName localhost:8002

Which tells your apache to take different folders on hitting different port numbers. That is when you hit localhost:8001/ it will take the contents from project1, similarly localhost:8002/ will point to your project2 folder.

By doing this we and run 2 different sites on our local machine.

Note: You need to restart your apache whenever you change something in httpd.conf or httpd-vhosts.conf.

Solution 3:

Virtual Host create

1. C:\xampp\apache\conf\extra Open httpd-vhost file then Add
   DocumentRoot "C:\xampp\htdocs\project\timegrid\public" ServerName mytimegrid.me(ur choice)
2. C:\Windows\System32\drivers\etc Open hosts file then add 127.0.0.1 mytimegrid.me(Your Domain Name)

N.B. you first open your editor(notepad etc....) as Run As Administrator mode otherwise you can not save these files. ok.