How to SSH on a port other than 22

I have two computers behind the same router. Let's call them A and B.

A can SSH to B in the following manner: ssh usr@<internal ip of computer>

B can SSH to A by doing the same, but the external IP must be used. I have forwarded port 22 of my router to the IP of computer A, so that all makes sense to me.

However, I want to also forward port 26 to computer B, and SSH from outside the network by using the external IP for both, but specifying either port 22 or 26, to effectively select which computer to use.

I have tried allowing port 26 through OUTPUT of iptables on A and INPUT of B, but that didn't seem to work. I have also forwarded port 26 to the internal IP of B (through the router), as I did with 22 for A.

Here's what I get when I try to SSH from A to B using the external IP and port 26:

ssh: connect to host xx.xx.xxx.xx port 26: Connection refused.

Versions:

• A = OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012
• B = OpenSSH_6.0p1 Debian-4, OpenSSL 1.0.1c 10 May 2012

A has 12.04 Ubuntu, B is a Raspberry Pi with Raspbian.

EDIT: Something that I forgot to put in: I did try switching the SSH config file (I found it is /etc/ssh/ssh_config) I uncommented (deleted the #) the line with Port and changed 22 to 26. It gave me the connection refused message still. (I rebooted to no avail.)

Solution 1:

If you are on Linux system and you want connect to an SSH server on port 26 you can use the following command.

ssh [email protected] -p 26

Note:

1. Replace server IP with the IP Address or DNS name of your server.
2. Change your port number as you have set.
3. if you are using custom port SSH then same port most be allowed for outbound, inbound connection on firewall otherwise the connection will not establish

Solution 2:

It seems like you're not running SSH on port 26 on the second machine. You can either change the port number on that machine to 26.

Either edit /etc/ssh/sshd_config & don't forget to restart SSH (service sshd restart) or leave it on 22, but forward port 26 on the router to port 22 on the second machine. Also, don't forget to change any firewall settings on the second machine to allow the connections through.

Solution 3:

I use port 22 only for the intranet ssh access.

For access via internet I use a custom (unusual) port. This has the benefit the I reduce the load produced generated by script kids who are scanning port 22 for "well known usernames".

The external sshd processes are controlled by xinetd and running in parallel to the internal sshd process. In the following example I use the port 12345:

You are free to change this to any available free port number on your system. Maybe a higher value will make it also a bit more unlikely that this port is scanned by a "quick port scan".

The xinetd configuration is:

service ssh-external
{
    socket_type = stream
    wait = no
    protocol = tcp
    type = UNLISTED
    user = root
    server = /usr/sbin/sshd
    server_args = -i -f  /etc/ssh/external-sshd.config
    port = 12345
    log_on_failure += USERID
}

The file /etc/ssh/external-ssdh.config can be a copy of your usual sshd configuration. Ensure that the following statements are configured:

Port 12345
AddressFamily inet

I also suggest to enforce public key authentication and disable password authentication for the internet access:

PasswordAuthentication no
PermitEmptyPasswords no
ChallengeResponseAuthentication no

Solution 4:

Listen ports also can be hard linked to IP addresses

/etc/ssh/sshd_config:

ListenAddress 10.10.10.10:22
ListenAddress 20.20.20.20:4444