Recover data from partition showing as FFFF

The second partition of your internal disk got the wrong partition type, your data probably won't be lost.

A bootable OS X partition (except the Recovery HD) either has the GUID 48465300-0000-11AA-AA11-00306543ECAC for a standard OS X partition or the GUID 53746F72-6167-11AA-AA11-00306543ECAC for a CoreStorage partition. The FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF is an unknown partition type (but not no partition like the 000000-0000-0000.... one).

The first block of a standard OS X partition doesn't contain non-zeros, the first block of a CoreStorage partition contains some non-zeros. To get the first 3 blocks of a partition enter sudo dd if=/dev/diskXsY count=3 | hexdump.

The GUID can be modified with gpt. Modifying the GUID partition table with gpt requires to unmount the whole disk which can't be done if you boot to its Recovery HD or another boot volume on the same disk.

• Boot to an independent OS X/macOS system providing hexdump. Here it was possible to boot to Internet Recovery because the disk contains a second OS X system (disk0s6) with hexdump. The (Internet) Recovery HD usually doesn't provide hexdump.
• Open Terminal in the menubar Utilities > Terminal
• Get an overview with diskutil list

• Get an overview of your internal disk with the disk identifier found in the previous command. Below I assume the disk identifier of your internal disk is disk1 (replace it with the one you have found in your environment)

  gpt -r show disk1
  

• Unmount disk1 with diskutil umountDisk disk1 if booted to an external disk/thumb drive with a full OS X/macOS

• hexdump the first 3 blocks of the FFFF... partition:

  dd if=/dev/disk1s2 count=3 | hexdump
  

  or (depending on your boot volume)

  dd if=/dev/disk1s2 count=3 | /Volumes/2nd_SysVol_name/usr/bin/hexdump
  

  The following result identifies it as a normal OS X partition:

  0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000400 48 2b 00 04 80 00 21 00 48 46 53 4a 00 00 01 ff
  0000410 d3 8c 77 d3 d4 33 3c b0 00 00 00 00 d3 8c 5b b3
  0000420 00 00 02 a8 00 00 00 25 00 00 10 00 00 fe b7 f6
  0000430 00 fe 1e fa 00 ed 80 00 00 01 00 00 00 01 00 00
  0000440 00 00 10 f2 00 00 5a 9d 00 00 00 00 00 00 00 01
  0000450 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0000460 00 00 00 00 00 00 00 00 7d 9d b0 3a 02 31 62 f0
  0000470 00 00 00 00 00 1f e0 00 00 1f e0 00 00 00 01 fe
  0000480 00 00 00 01 00 00 01 fe 00 00 00 00 00 00 00 00
  0000490 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  00004c0 00 00 00 00 00 60 00 00 00 60 00 00 00 00 06 00
  00004d0 00 00 0a 00 00 00 06 00 00 00 00 00 00 00 00 00
  00004e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000510 00 00 00 00 03 10 00 00 03 10 00 00 00 00 31 00
  0000520 00 03 ac 00 00 00 31 00 00 00 00 00 00 00 00 00
  0000530 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000560 00 00 00 00 05 40 00 00 05 40 00 00 00 00 54 00
  0000570 00 00 10 00 00 00 54 00 00 00 00 00 00 00 00 00
  0000580 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000600
  

  The first number is the byte count in hex: 0000000: 0; 0000600: 1536. The * denotes identical lines. This means: the first two blocks (0x000-0x3ff) are all zeros.

  A CoreStorage partition shows some non-zeros in the first block (0x000-0x1ff):

  0000000 0c 73 a1 a9 ff ff ff ff 01 00 10 00 07 14 d7 01
  0000010 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0000030 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0000040 00 20 c1 cc 0f 00 00 00 00 00 00 00 00 00 00 00
  0000050 00 00 00 00 00 00 00 00 43 53 01 00 00 00 04 00
  0000060 00 10 00 00 00 00 40 00 11 bc fc 00 00 00 00 00
  0000070 11 c0 fc 00 00 00 00 00 11 c4 fc 00 00 00 00 00
  0000080 11 c8 fc 00 00 00 00 00 00 00 00 00 00 00 00 00
  0000090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  00000a0 00 00 00 00 00 00 00 00 10 00 00 00 02 00 00 00
  00000b0 62 02 98 59 ee a9 ab 51 9b 49 23 90 2e f8 8b 43
  00000c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000130 e4 6e f8 f2 63 99 45 c1 b2 13 86 28 a5 18 46 6d
  0000140 c4 51 c0 f6 32 f9 43 ab 8e 59 42 d2 1a ef f6 50
  0000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000400 48 2b 00 04 80 00 21 00 48 46 53 4a 00 00 01 ff
  0000410 d1 98 a4 93 d4 33 8b d5 00 00 00 00 d1 98 88 73
  0000420 00 06 07 53 00 01 82 39 00 00 10 00 00 fb 6a 00
  0000430 00 c5 1c 55 00 25 73 c7 00 01 00 00 00 01 00 00
  0000440 00 0d e2 65 00 3e a2 fb 00 00 00 00 02 20 00 fb
  0000450 00 00 00 31 00 06 b9 ef 00 00 00 00 00 00 00 00
  0000460 00 00 00 00 00 00 00 31 fb 48 1e a0 6c 47 a2 9f
  0000470 00 00 00 00 00 1f e0 00 00 1f e0 00 00 00 01 fe
  0000480 00 00 00 01 00 00 01 fe 00 00 00 00 00 00 00 00
  0000490 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  00004c0 00 00 00 00 00 60 00 00 00 60 00 00 00 00 06 00
  00004d0 00 00 0a 00 00 00 06 00 00 00 00 00 00 00 00 00
  00004e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000510 00 00 00 00 0e 40 00 00 01 30 00 00 00 00 e4 00
  0000520 00 00 10 00 00 00 e4 00 00 00 00 00 00 00 00 00
  0000530 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000560 00 00 00 00 11 d0 00 00 01 30 00 00 00 01 1d 00
  0000570 00 02 80 00 00 00 72 00 00 13 30 97 00 00 13 00
  0000580 00 15 c5 aa 00 00 13 00 00 18 2d 23 00 00 13 00
  0000590 00 19 d8 fb 00 00 13 00 00 1b 76 cb 00 00 13 00
  00005a0 00 1c 34 70 00 00 13 00 00 1d 0e 4d 00 00 13 00
  00005b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0000600
  

  The line starting with byte 0x130 shows the UUID of the Physical Volume, the line starting with byte 0x140 shows the UUID of the Logical Volume Group.

  The string 48 46 53 4a (= "HFSJ") in the first 16 bytes of the third blocks identifies a Journaled HFS+ volume.

• First fix your Recovery partition:

  diskutil umountDisk disk1
  gpt remove -i 3 disk1
  diskutil umountDisk disk1
  gpt add -i 3 -b 684055176 -s 1269536 -t 426F6F74-0000-11AA-AA11-00306543ECAC disk1
  

• Now remove the second partition:

  diskutil umountDisk disk1
  gpt remove -i 2 disk1
  diskutil umountDisk disk1
  

  re-add the partition with the proper type
  either a normal OS X partition

  gpt add -i 2 -b 409640 -s 683645536 -t 48465300-0000-11AA-AA11-00306543ECAC disk1
  

  or (if you have found a CoreStorage partition)

  gpt add -i 2 -b 409640 -s 683645536 -t 53746F72-6167-11AA-AA11-00306543ECAC disk1
  

• Finally verify/repair the disk with diskutil verifyDisk disk1 and/or diskutil verifyVolume disk1s2. If a repair is needed use repair (instead of verify) as prefix in the above commands.

If you don't have an OS X/macOS volume with hexdump use this answer: How do I recover/fix my OS X partition?