Find all storage devices attached to a Linux machine [closed]

/proc/partitions will list all the block devices and partitions that the system recognizes. You can then try using file -s <device> to determine what kind of filesystem is present on the partition, if any.

You can always do fdisk -l which seems to work pretty well, even on strange setups such as EC2 xvda devices.

Here is a dump for a m1.large instance:

root@ip-10-126-247-82:~# fdisk -l

Disk /dev/xvda1: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders, total 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvda1 doesn't contain a valid partition table

Disk /dev/xvda2: 365.0 GB, 365041287168 bytes
255 heads, 63 sectors/track, 44380 cylinders, total 712971264 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvda2 doesn't contain a valid partition table

Disk /dev/xvda3: 939 MB, 939524096 bytes
255 heads, 63 sectors/track, 114 cylinders, total 1835008 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvda3 doesn't contain a valid partition table

While mount says:

root@ip-10-126-247-82:~# mount
/dev/xvda1 on / type ext4 (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
/dev/xvda2 on /mnt type ext3 (rw)

And /proc/partitions says:

root@ip-10-126-247-82:~# cat /proc/partitions
major minor  #blocks  name

 202        1   10485760 xvda1
 202        2  356485632 xvda2
 202        3     917504 xvda3

Side Note

How fdisk -l works is something I would love to know myself.

you can also try lsblk ... is in util-linux ... but i have a question too

fdisk -l /dev/sdl

no result

grep sdl /proc/partitions      
   8      176   15632384 sdl
   8      177   15628288 sdl1

lsblk | grep sdl
sdl       8:176  1  14.9G  0 disk  
`-sdl1    8:177  1  14.9G  0 part  

fdisk is good but not that good ... seems like it cannot "see" everything

in my particular example i have a stick that have also a card reader build in it and i can see only the stick using fdisk:

fdisk -l /dev/sdk

Disk /dev/sdk: 15.9 GB, 15931539456 bytes
255 heads, 63 sectors/track, 1936 cylinders, total 31116288 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xbe24be24

   Device Boot      Start         End      Blocks   Id  System
/dev/sdk1   *        8192    31116287    15554048    c  W95 FAT32 (LBA)

but not the card (card being /dev/sdl)

also, file -s is inefficient ...

file -s /dev/sdl1
/dev/sdl1: sticky x86 boot sector, code offset 0x52, OEM-ID "NTFS    ", sectors/cluster 8, reserved sectors 0, Media descriptor 0xf8, heads 255, hidden sectors 8192, dos < 4.0 BootSector (0x0)

that's nice ... BUT

fdisk -l /dev/sdb
/dev/sdb1            2048   156301487    78149720   fd  Linux raid autodetect
/dev/sdb2       156301488   160086527     1892520   82  Linux swap / Solaris

file -s /dev/sdb1
/dev/sdb1: sticky \0

to see information about a disk that cannot be accesed by fdisk, you can use parted:

parted /dev/sdl print

Model: Mass Storage Device (scsi)
Disk /dev/sdl: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
 1      4194kB  16.0GB  16.0GB  primary  ntfs




arted /dev/sdb print 
Model: ATA Maxtor 6Y080P0 (scsi)
Disk /dev/sdb: 82.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system     Flags
 1      1049kB  80.0GB  80.0GB  primary                  raid
 2      80.0GB  82.0GB  1938MB  primary  linux-swap(v1)

ls /sys/block

Using HAL (kernel 2.6.17 and up):

#! /bin/bash
hal-find-by-property --key volume.fsusage --string filesystem |
while read udi ; do
    # ignore optical discs
    if [[ "$(hal-get-property --udi $udi --key volume.is_disc)" == "false" ]]; then
        dev=$(hal-get-property --udi $udi --key block.device)   
        fs=$(hal-get-property --udi $udi --key volume.fstype) 
        echo $dev": "$fs
    fi 
done