Unplugging USB hard drive can damage computer? Seriously?

I’m reading through the manual for a Samsung portable USB hard drive, and I’ve come across this warning:

Detaching the USB cable while file transfer is in progress can damage your computer and/or [hard drive].

Here’s the original warning:

Seriously? I’m going to fry my computer by doing something USB was explicitly designed for right from the beginning—hot-plugging? Surely a computer doesn’t become damaged just because a data transfer fails.

Shorter answer.

That claim of damage is more of a legal way for a manufacturer to protect themselves in the off-hand chance something goes wrong. Meaning it is practically nonsense. It’s no different than the obtuse language used in an EULA (End-User License Agreement) in the world of software; the manufacturer is right, you are wrong, our company has better lawyers than you, give us your money for a product, have a nice day, goodbye.

I highly doubt anything would be seriously damaged by removing a USB hard drive that is still active. So I wouldn’t live my life in fear of a warning like this.

I would however take this nonsense to mean if something did go wrong the manufacturer would avoid any responsibility or liability instead claiming the fault is yours since you failed to properly use the device as instructed in that little pamphlet most people immediately throw out when they purchase such a device.

More details below.

Longer answer.

Seriously? I’m going to fry my computer by doing something USB was explicitly designed for right from the beginning—hot-plugging? Surely a computer doesn’t become damaged just because a data transfer fails.

Will you fry your whole computer? Most likely no. Do you increase the risk—even on a slight level—of damaging a USB port by unplugging the drive while it’s active? I’d say yes. The risk mainly comes from something like static electricity being generated between you, the computer, the USB cable and the drive port. And since the drive is powered and connected to some level of grounding, it becomes an attractive path for a stray static charge as explained in this blog post on the “Premium USB Blog”; bold emphasis is mine:

ESD damage to your USB drives or ports can cause latency failures that will slow down your data transmission following static shock. Your port or device could also face more severe damage that would essentially fry it and cause it not to work at all. It could also shorten its overall lifespan. ESD can occur under simple circumstances—plugging and unplugging or flipping a nearby switch.

Before you alarmingly back away from your computer, be comforted by the fact that the average computer user won’t necessarily have to worry about it happening. However, it’s still important to know about it in case you ever find yourself in a situation where ESD may occur. The odds of static shock increase once you add computer system upgrades, USB hard drives, graphics cards and other heavy duty peripherals.

Because USB ports are hot pluggable, they need protection against static shock. With USB 2.0 data transfer rates up to 480Mbps and USB 3.0 at 5Gbps, these speeds are fast enough to spark interruptions in the signals. Many USB hubs are protected from ESD up to 2kV, but that’s not always enough.

But again the risk is slight but—as that article explains—the risk does exist on some level.

Another risk is gyroscopic inertia that stems from the hard drive itself still spinning while you disconnect it. I’ve actually lost two external 3.5" drives because I unmounted them, disconnected them and grabbed them too quickly while the drives themselves were still spinning. The disorientation from me lifting one way but the gyroscopic inertia from spinning platters pulling in another direction resulted in me losing my grip on the enclosure with the drive coming crashing down onto the floor and basically making the drive unusable. But again, this is an edge risk.

If you ask me, overwrought details like this in the manuals are not warning you of a common risk as much as they are limiting the drive manufacturer’s liability if somehow your data is lost—or the drive dies—and you end up complaining to the manufacturer. The idea is you would conceivably call up a support tech, they would ask you what you did, you might tell them you disconnected the drive in the middle of a transfer and then they might say, “Sorry, but we don’t cover that.”

Remember, much like an EULA (End-User License Agreement) the main purpose of such documentation is not to make sure you read it as much as it is in the manufacturer’s best interest to make sure they can claim you were provided these “warnings” if something goes wrong from a legal standpoint.

Also, just a clarification on this point:

I’m going to fry my computer by doing something USB was explicitly designed for right from the beginning—hot-plugging?

The idea that USB devices can be hot plugged into the system simply means the USB connection is “hot pluggable” but how the devices past that basic connection reacts if hot plugged is a different issue entirely.

For example, I just updated my iPhone while writing this post and I had it connected to my Mac Mini via a USB cable. Sure, I could have unplugged the USB cable in them middle of the update… And what would happen? My computer would be fine and my iPhone would technically be fine from a physical standpoint. But if I unplugged it at the perfectly wrong moment, I could have “bricked” my iPhone.

A device being “hot pluggable” simply means that the device can be connected without having to completely power down the main system to connect it or use a device “probe” like those SCSI probe control panels most every Mac OS install had back in the pre-Mac OS X days of the OS.

I believe the technical term is "covering your rear".

Its unlikely you will damage your pc, and somewhat unlikely you'll kill your hard drive (though sudden power stops are bad).

However, you might cause data loss, if a transfer is in progress.

That said, if the drive does die, this gives them grounds to deny a warranty request if you mention doing that, and pretty much covers them if there's data loss. "It says so in the manual, you were using it wrong"

Ejecting properly is best practice but hardly a matter of life and death.

They might be afraid that you could copy system files from your USB drive onto your main hard drive (from a backup, say): detaching your USB drive in the middle of a transfer could leave you with an incomplete copy of a system file on your hard drive that would then no longer work, thus "damaging" your computer. Think about an incomplete explorer.exe on Windows or bash on Linux, and the effect they would have on system startup.

If you are talking about an actual hard drive with a spinning motor (eg. an inductive load), you shouldn't discount the possibility of an inductive voltage spike when disconnecting power:

https://electronics.stackexchange.com/a/19868

Obviously both the drive AND the computer should be designed to withstand it, but it is definitely possible that the hard drive motor, powered via USB, could generate enough of an inductive "kick-back" when disconnected to damage the drive AND/OR the computer.

So naturally, as other users mentioned, they're covering their liability.

Edit:

Here is what an inductive voltage spike looks like on a much larger scale:

https://youtu.be/hIkNY5xjy5k

"while file transfer is in progress" which means that the file structure would be in flux and could get corrupted if it doesn't have some kind of transaction system. Using "Safely Remove Hardware" will flush any delayed writes, wait until the transfer is complete and ensure no programs are using files on it.

I have personally seen a usb drive fail to mount on unix after being pulled out of a Windows machine without "Safely Removing" it. Putting it back into the widows machine and doing a safe remove fixed it.