Explain the quantile() function in R
Solution 1:
You're understandably confused. That documentation is terrible. I had to go back to the paper its based on (Hyndman, R.J.; Fan, Y. (November 1996). "Sample Quantiles in Statistical Packages". American Statistician 50 (4): 361–365. doi:10.2307/2684934) to get an understanding. Let's start with the first problem.
where 1 <= i <= 9, (j-m)/n <= p < (j-m+1)/ n, x[j] is the jth order statistic, n is the sample size, and m is a constant determined by the sample quantile type. Here gamma depends on the fractional part of g = np+m-j.
The first part comes straight from the paper, but what the documentation writers omitted was that j = int(pn+m). This means Q[i](p) only depends on the two order statistics closest to being p fraction of the way through the (sorted) observations. (For those, like me, who are unfamiliar with the term, the "order statistics" of a series of observations is the sorted series.)
Also, that last sentence is just wrong. It should read
Here gamma depends on the fractional part of np+m, g = np+m-j
As for m that's straightforward. m depends on which of the 9 algorithms was chosen. So just like Q[i] is the quantile function, m should be considered m[i]. For algorithms 1 and 2, m is 0, for 3, m is -1/2, and for the others, that's in the next part.
For the continuous sample quantile types (4 through 9), the sample quantiles can be obtained by linear interpolation between the kth order statistic and p(k):
p(k) = (k - alpha) / (n - alpha - beta + 1), where α and β are constants determined by the type. Further, m = alpha + p(1 - alpha - beta), and gamma = g.
This is really confusing. What the documentation calls p(k) is not the same as the p from before. p(k) is the plotting position. In the paper, the authors write it as pk, which helps. Especially since in the expression for m, the p is the original p, and the m = alpha + p * (1 - alpha - beta). Conceptually, for algorithms 4-9, the points (pk, x[k]) are interpolated to get the solution (p, Q[i](p)). Each algorithm only differs in the algorithm for the pk.
As for the last bit, R is just stating what S uses.
The original paper gives a list of 6 "desirable properties for a sample quantile" function, and states a preference for #8 which satisfies all by 1. #5 satisfies all of them, but they don't like it on other grounds (it's more phenomenological than derived from principles). #2 is what non-stat geeks like myself would consider the quantiles and is what's described in wikipedia.
BTW, in response to dreeves answer, Mathematica does things significantly differently. I think I understand the mapping. While Mathematica's is easier to understand, (a) it's easier to shoot yourself in the foot with nonsensical parameters, and (b) it can't do R's algorithm #2. (Here's Mathworld's Quantile page, which states Mathematica can't do #2, but gives a simpler generalization of all the other algorithms in terms of four parameters.)
Solution 2:
There are various ways of computing quantiles when you give it a vector, and don't have a known CDF.
Consider the question of what to do when your observations don't fall on quantiles exactly.
The "types" are just determining how to do that. So, the methods say, "use a linear interpolation between the k-th order statistic and p(k)".
So, what's p(k)? One guy says, "well, I like to use k/n". Another guy says, "I like to use (k-1)/(n-1)" etc. Each of these methods have different properties that are better suited for one problem or another.
The \alpha's and \beta's are just ways to parameterize the functions p. In one case, they're 1 and 1. In another case, they're 3/8 and -1/4. I don't think the p's are ever a constant in the documentation. They just don't always show the dependency explicitly.
See what happens with the different types when you put in vectors like 1:5 and 1:6.
(also note that even if your observations fall exactly on the quantiles, certain types will still use linear interpolation).
Solution 3:
I believe the R help documentation is clear after the revisions noted in @RobHyndman's comment, but I found it a bit overwhelming. I am posting this answer in case it helps someone move quickly through the options and their assumptions.
To get a grip on quantile(x, probs=probs), I wanted to check out the source code. This too was trickier than I anticipated in R so I actually just grabbed it from a github repo that looked recent enough to run with. I was interested in the default (type 7) behavior, so I annotated that some, but didn't do the same for each option.
You can see how the "type 7" method interpolates, step by step, both in the code and also I added a few lines to print some important values as it goes.
quantile.default <-function(x, probs = seq(0, 1, 0.25), na.rm = FALSE, names = TRUE
, type = 7, ...){
if(is.factor(x)) { #worry about non-numeric data
if(!is.ordered(x) || ! type %in% c(1L, 3L))
stop("factors are not allowed")
lx <- levels(x)
} else lx <- NULL
if (na.rm){
x <- x[!is.na(x)]
} else if (anyNA(x)){
stop("missing values and NaN's not allowed if 'na.rm' is FALSE")
}
eps <- 100*.Machine$double.eps #this is to deal with rounding things sensibly
if (any((p.ok <- !is.na(probs)) & (probs < -eps | probs > 1+eps)))
stop("'probs' outside [0,1]")
#####################################
# here is where terms really used in default type==7 situation get defined
n <- length(x) #how many observations are in sample?
if(na.p <- any(!p.ok)) { # set aside NA & NaN
o.pr <- probs
probs <- probs[p.ok]
probs <- pmax(0, pmin(1, probs)) # allow for slight overshoot
}
np <- length(probs) #how many quantiles are you computing?
if (n > 0 && np > 0) { #have positive observations and # quantiles to compute
if(type == 7) { # be completely back-compatible
index <- 1 + (n - 1) * probs #this gives the order statistic of the quantiles
lo <- floor(index) #this is the observed order statistic just below each quantile
hi <- ceiling(index) #above
x <- sort(x, partial = unique(c(lo, hi))) #the partial thing is to reduce time to sort,
#and it only guarantees that sorting is "right" at these order statistics, important for large vectors
#ties are not broken and tied elements just stay in their original order
qs <- x[lo] #the values associated with the "floor" order statistics
i <- which(index > lo) #which of the order statistics for the quantiles do not land on an order statistic for an observed value
#this is the difference between the order statistic and the available ranks, i think
h <- (index - lo)[i] # > 0 by construction
## qs[i] <- qs[i] + .minus(x[hi[i]], x[lo[i]]) * (index[i] - lo[i])
## qs[i] <- ifelse(h == 0, qs[i], (1 - h) * qs[i] + h * x[hi[i]])
qs[i] <- (1 - h) * qs[i] + h * x[hi[i]] # This is the interpolation step: assemble the estimated quantile by removing h*low and adding back in h*high.
# h is the arithmetic difference between the desired order statistic amd the available ranks
#interpolation only occurs if the desired order statistic is not observed, e.g. .5 quantile is the actual observed median if n is odd.
# This means having a more extreme 99th observation doesn't matter when computing the .75 quantile
###################################
# print all of these things
cat("floor pos=", c(lo))
cat("\nceiling pos=", c(hi))
cat("\nfloor values= ", c(x[lo]))
cat( "\nwhich floors not targets? ", c(i))
cat("\ninterpolate between ", c(x[lo[i]]), ";", c(x[hi[i]]))
cat( "\nadjustment values= ", c(h))
cat("\nquantile estimates:")
}else if (type <= 3){## Types 1, 2 and 3 are discontinuous sample qs.
nppm <- if (type == 3){ n * probs - .5 # n * probs + m; m = -0.5
} else {n * probs} # m = 0
j <- floor(nppm)
h <- switch(type,
(nppm > j), # type 1
((nppm > j) + 1)/2, # type 2
(nppm != j) | ((j %% 2L) == 1L)) # type 3
} else{
## Types 4 through 9 are continuous sample qs.
switch(type - 3,
{a <- 0; b <- 1}, # type 4
a <- b <- 0.5, # type 5
a <- b <- 0, # type 6
a <- b <- 1, # type 7 (unused here)
a <- b <- 1 / 3, # type 8
a <- b <- 3 / 8) # type 9
## need to watch for rounding errors here
fuzz <- 4 * .Machine$double.eps
nppm <- a + probs * (n + 1 - a - b) # n*probs + m
j <- floor(nppm + fuzz) # m = a + probs*(1 - a - b)
h <- nppm - j
if(any(sml <- abs(h) < fuzz)) h[sml] <- 0
x <- sort(x, partial =
unique(c(1, j[j>0L & j<=n], (j+1)[j>0L & j<n], n))
)
x <- c(x[1L], x[1L], x, x[n], x[n])
## h can be zero or one (types 1 to 3), and infinities matter
#### qs <- (1 - h) * x[j + 2] + h * x[j + 3]
## also h*x might be invalid ... e.g. Dates and ordered factors
qs <- x[j+2L]
qs[h == 1] <- x[j+3L][h == 1]
other <- (0 < h) & (h < 1)
if(any(other)) qs[other] <- ((1-h)*x[j+2L] + h*x[j+3L])[other]
}
} else {
qs <- rep(NA_real_, np)}
if(is.character(lx)){
qs <- factor(qs, levels = seq_along(lx), labels = lx, ordered = TRUE)}
if(names && np > 0L) {
names(qs) <- format_perc(probs)
}
if(na.p) { # do this more elegantly (?!)
o.pr[p.ok] <- qs
names(o.pr) <- rep("", length(o.pr)) # suppress <NA> names
names(o.pr)[p.ok] <- names(qs)
o.pr
} else qs
}
####################
# fake data
x<-c(1,2,2,2,3,3,3,4,4,4,4,4,5,5,5,5,5,5,5,5,5,6,6,7,99)
y<-c(1,2,2,2,3,3,3,4,4,4,4,4,5,5,5,5,5,5,5,5,5,6,6,7,9)
z<-c(1,2,2,2,3,3,3,4,4,4,4,4,5,5,5,5,5,5,5,5,5,6,6,7)
#quantiles "of interest"
probs<-c(0.5, 0.75, 0.95, 0.975)
# a tiny bit of illustrative behavior
quantile.default(x,probs=probs, names=F)
quantile.default(y,probs=probs, names=F) #only difference is .975 quantile since that is driven by highest 2 observations
quantile.default(z,probs=probs, names=F) # This shifts everything b/c now none of the quantiles fall on an observation (and of course the distribution changed...)... but
#.75 quantile is stil 5.0 b/c the observations just above and below the order statistic for that quantile are still 5. However, it got there for a different reason.
#how does rescaling affect quantile estimates?
sqrt(quantile.default(x^2, probs=probs, names=F))
exp(quantile.default(log(x), probs=probs, names=F))