Windows 10 OpenVPN Client connects but can't access anything
I have OpenVPN server running on a Windows 2012 server. It works perfectly and from my iPhone and iPad I can connect to the VPN, all my web traffic routes over the VPN and I can use the iOS Remote Desktop app to remote into devices on my network.
I installed the OpenVPN app on my Windows 10 laptop with the same client profile as the iOS devices and while it allows me to connect, I then can't access the internet or any of the devices on the LAN.
It seems the DNS is working as when I try to ping a domain name it resolves the IP, but then I get Request Timed Out.
I can't even ping the VPN gateway 10.8.0.1.
This is my server config:
port 1194
proto udp
dev tun
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "route 192.168.0.0 255.255.255.0"
push "redirect-gateway local def1"
push "dhcp-option DNS 8.8.8.8"
client-to-client
keepalive 10 120
comp-lzo
persist-key
persist-tun
status openvpn-status.log
verb 3
ca "C:\\Program Files (x86)\\OpenVPN\\config\\ca.crt"
cert "C:\\Program Files (x86)\\OpenVPN\\config\\server.crt"
key "C:\\Program Files (x86)\\OpenVPN\\config\\server.key"
dh "C:\\Program Files (x86)\\OpenVPN\\config\\dh1024.pem"
This is my client config:
client
dev tun
proto udp
remote xxx.xxx.xxx.xxx 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ns-cert-type server
comp-lzo
verb 3
And this is the log from my most recent connection:
Mon Jan 16 13:45:08 2017 OpenVPN 2.4.0 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Dec 27 2016
Mon Jan 16 13:45:08 2017 Windows version 6.2 (Windows 8 or greater) 64bit
Mon Jan 16 13:45:08 2017 library versions: OpenSSL 1.0.2i 22 Sep 2016, LZO 2.09
Enter Management Password:
Mon Jan 16 13:45:08 2017 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Mon Jan 16 13:45:08 2017 Need hold release from management interface, waiting...
Mon Jan 16 13:45:09 2017 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Mon Jan 16 13:45:09 2017 MANAGEMENT: CMD 'state on'
Mon Jan 16 13:45:09 2017 MANAGEMENT: CMD 'log all on'
Mon Jan 16 13:45:09 2017 MANAGEMENT: CMD 'hold off'
Mon Jan 16 13:45:09 2017 MANAGEMENT: CMD 'hold release'
Mon Jan 16 13:45:09 2017 MANAGEMENT: >STATE:1484574309,RESOLVE,,,,,,
Mon Jan 16 13:45:09 2017 TCP/UDP: Preserving recently used remote address: [AF_INET]xxx.xxx.xxx.xxx:1194
Mon Jan 16 13:45:09 2017 Socket Buffers: R=[65536->65536] S=[65536->65536]
Mon Jan 16 13:45:09 2017 UDP link local: (not bound)
Mon Jan 16 13:45:09 2017 UDP link remote: [AF_INET]xxx.xxx.xxx.xxx:1194
Mon Jan 16 13:45:09 2017 MANAGEMENT: >STATE:1484574309,WAIT,,,,,,
Mon Jan 16 13:45:09 2017 MANAGEMENT: >STATE:1484574309,AUTH,,,,,,
Mon Jan 16 13:45:09 2017 TLS: Initial packet from [AF_INET]xxx.xxx.xxx.xxx:1194, sid=153bc069 fc314ff6
Mon Jan 16 13:45:10 2017 VERIFY OK: depth=1, C=UK, ST=...
Mon Jan 16 13:45:10 2017 VERIFY OK: nsCertType=SERVER
Mon Jan 16 13:45:10 2017 VERIFY OK: depth=0, C=UK, ST=...
Mon Jan 16 13:45:10 2017 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Mon Jan 16 13:45:10 2017 [server] Peer Connection Initiated with [AF_INET]xxx.xxx.xxx.xxx:1194
Mon Jan 16 13:45:11 2017 MANAGEMENT: >STATE:1484574311,GET_CONFIG,,,,,,
Mon Jan 16 13:45:11 2017 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
Mon Jan 16 13:45:11 2017 PUSH: Received control message: 'PUSH_REPLY,route 192.168.0.0 255.255.255.0,redirect-gateway local def1,dhcp-option DNS 8.8.8.8,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Mon Jan 16 13:45:11 2017 OPTIONS IMPORT: timers and/or timeouts modified
Mon Jan 16 13:45:11 2017 OPTIONS IMPORT: --ifconfig/up options modified
Mon Jan 16 13:45:11 2017 OPTIONS IMPORT: route options modified
Mon Jan 16 13:45:11 2017 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Mon Jan 16 13:45:11 2017 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Mon Jan 16 13:45:11 2017 WARNING: INSECURE cipher with block size less than 128 bit (64 bit). This allows attacks like SWEET32. Mitigate by using a --cipher with a larger block size (e.g. AES-256-CBC).
Mon Jan 16 13:45:11 2017 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Mon Jan 16 13:45:11 2017 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Mon Jan 16 13:45:11 2017 WARNING: INSECURE cipher with block size less than 128 bit (64 bit). This allows attacks like SWEET32. Mitigate by using a --cipher with a larger block size (e.g. AES-256-CBC).
Mon Jan 16 13:45:11 2017 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Mon Jan 16 13:45:11 2017 WARNING: cipher with small block size in use, reducing reneg-bytes to 64MB to mitigate SWEET32 attacks.
Mon Jan 16 13:45:11 2017 interactive service msg_channel=536
Mon Jan 16 13:45:11 2017 ROUTE_GATEWAY 172.20.10.1/255.255.255.240 I=12 HWADDR=14:10:9f:ce:13:73
Mon Jan 16 13:45:11 2017 open_tun
Mon Jan 16 13:45:11 2017 TAP-WIN32 device [Ethernet 4] opened: \\.\Global\{27AC27A1-A13C-4E12-B90F-C2797B3E8157}.tap
Mon Jan 16 13:45:11 2017 TAP-Windows Driver Version 9.21
Mon Jan 16 13:45:11 2017 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {27AC27A1-A13C-4E12-B90F-C2797B3E8157} [DHCP-serv: 10.8.0.5, lease-time: 31536000]
Mon Jan 16 13:45:11 2017 Successful ARP Flush on interface [6] {27AC27A1-A13C-4E12-B90F-C2797B3E8157}
Mon Jan 16 13:45:11 2017 do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Mon Jan 16 13:45:11 2017 MANAGEMENT: >STATE:1484574311,ASSIGN_IP,,10.8.0.6,,,,
Mon Jan 16 13:45:16 2017 TEST ROUTES: 3/3 succeeded len=2 ret=1 a=0 u/d=up
Mon Jan 16 13:45:16 2017 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5
Mon Jan 16 13:45:16 2017 Route addition via service succeeded
Mon Jan 16 13:45:16 2017 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5
Mon Jan 16 13:45:16 2017 Route addition via service succeeded
Mon Jan 16 13:45:16 2017 MANAGEMENT: >STATE:1484574316,ADD_ROUTES,,,,,,
Mon Jan 16 13:45:16 2017 C:\WINDOWS\system32\route.exe ADD 192.168.0.0 MASK 255.255.255.0 10.8.0.5
Mon Jan 16 13:45:16 2017 Route addition via service succeeded
Mon Jan 16 13:45:16 2017 C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5
Mon Jan 16 13:45:16 2017 Route addition via service succeeded
Mon Jan 16 13:45:16 2017 Initialization Sequence Completed
Mon Jan 16 13:45:16 2017 MANAGEMENT: >STATE:1484574316,CONNECTED,SUCCESS,10.8.0.6,xxx.xxx.xxx.xxx,1194,,
Any ideas where to start?
Please, could you show the Windows 10 client's routing table while connected?
C:\> route print
According to the client log, the OpenVPN client did not add a static route to the OpenVPN server through the original default gateway (the one used before the connection establishes). This prevents OpenVPN client packets from reaching the server, because of the absence of a route to it. I suggest you to change the server config, replacing the line:
push "redirect-gateway local def1"
With one of these:
push "redirect-gateway autolocal def1"
push "redirect-gateway def1"
Reference:
$ man 8 openvpn
--redirect-gateway flags...
Automatically execute routing commands to cause all outgoing IP traffic to be redirected over the VPN. This is a client-side option.
This option performs three steps:
(1) Create a static route for the --remote address which forwards to the pre-existing default gateway. This is done so that (3) will not create a routing loop.
(2) Delete the default gateway route.
(3) Set the new default gateway to be the VPN endpoint address (derived either from --route-gateway or the second parameter to --ifconfig when --dev tun is specified).
When the tunnel is torn down, all of the above steps are reversed so that the original default route is restored.
Option flags:
local -- Add the local flag if both OpenVPN servers are directly connected via a common subnet, such as with wireless. The local flag will cause step 1 above to be omit‐
ted.
autolocal -- Try to automatically determine whether to enable local flag above.
def1 -- Use this flag to override the default gateway by using 0.0.0.0/1 and 128.0.0.0/1 rather than 0.0.0.0/0. This has the benefit of overriding but not wiping out the
original default gateway.
bypass-dhcp -- Add a direct route to the DHCP server (if it is non-local) which bypasses the tunnel (Available on Windows clients, may not be available on non-Windows
clients).
bypass-dns -- Add a direct route to the DNS server(s) (if they are non-local) which bypasses the tunnel (Available on Windows clients, may not be available on non-Windows
clients).
block-local -- Block access to local LAN when the tunnel is active, except for the LAN gateway itself. This is accomplished by routing the local LAN (except for the LAN
gateway address) into the tunnel.
ipv6 -- Redirect IPv6 routing into the tunnel. This works similar to the def1 flag, that is, more specific IPv6 routes are added (2000::/4, 3000::/4), covering the whole
IPv6 unicast space.
!ipv4 -- Do not redirect IPv4 traffic - typically used in the flag pair ipv6 !ipv4 to redirect IPv6-only.
With older versions of the OpenVPN-GUI, this was a symptom of the OpenVPN.exe file not running with administrative privileges, which were required in order to make changes to the routing table.
Connect and check the routing table with netstat -rn. If routes to your remote network(s) are not present, find the openvpn.exe binary and change it so that it runs as an Administrator.
It may sound obvious, but have you tried disabling firewall in Windows 10? Another option is to double-check your addressing as according to your log it seems that your gateway address is 10.8.0.5, not 10.8.0.1.