How can I send and receive WebSocket messages on the server side?
Note: This is some explanation and pseudocode as to how to implement a very trivial server that can handle incoming and outcoming WebSocket messages as per the definitive framing format. It does not include the handshaking process. Furthermore, this answer has been made for educational purposes; it is not a full-featured implementation.
Specification (RFC 6455)
Sending messages
(In other words, server → browser)
The frames you're sending need to be formatted according to the WebSocket framing format. For sending messages, this format is as follows:
- one byte which contains the type of data (and some additional info which is out of scope for a trivial server)
- one byte which contains the length
- either two or eight bytes if the length does not fit in the second byte (the second byte is then a code saying how many bytes are used for the length)
- the actual (raw) data
The first byte will be 1000 0001 (or 129) for a text frame.
The second byte has its first bit set to 0 because we're not encoding the data (encoding from server to client is not mandatory).
It is necessary to determine the length of the raw data so as to send the length bytes correctly:
- if
0 <= length <= 125, you don't need additional bytes - if
126 <= length <= 65535, you need two additional bytes and the second byte is126 - if
length >= 65536, you need eight additional bytes, and the second byte is127
The length has to be sliced into separate bytes, which means you'll need to bit-shift to the right (with an amount of eight bits), and then only retain the last eight bits by doing AND 1111 1111 (which is 255).
After the length byte(s) comes the raw data.
This leads to the following pseudocode:
bytesFormatted[0] = 129
indexStartRawData = -1 // it doesn't matter what value is
// set here - it will be set now:
if bytesRaw.length <= 125
bytesFormatted[1] = bytesRaw.length
indexStartRawData = 2
else if bytesRaw.length >= 126 and bytesRaw.length <= 65535
bytesFormatted[1] = 126
bytesFormatted[2] = ( bytesRaw.length >> 8 ) AND 255
bytesFormatted[3] = ( bytesRaw.length ) AND 255
indexStartRawData = 4
else
bytesFormatted[1] = 127
bytesFormatted[2] = ( bytesRaw.length >> 56 ) AND 255
bytesFormatted[3] = ( bytesRaw.length >> 48 ) AND 255
bytesFormatted[4] = ( bytesRaw.length >> 40 ) AND 255
bytesFormatted[5] = ( bytesRaw.length >> 32 ) AND 255
bytesFormatted[6] = ( bytesRaw.length >> 24 ) AND 255
bytesFormatted[7] = ( bytesRaw.length >> 16 ) AND 255
bytesFormatted[8] = ( bytesRaw.length >> 8 ) AND 255
bytesFormatted[9] = ( bytesRaw.length ) AND 255
indexStartRawData = 10
// put raw data at the correct index
bytesFormatted.put(bytesRaw, indexStartRawData)
// now send bytesFormatted (e.g. write it to the socket stream)
Receiving messages
(In other words, browser → server)
The frames you obtain are in the following format:
- one byte which contains the type of data
- one byte which contains the length
- either two or eight additional bytes if the length did not fit in the second byte
- four bytes which are the masks (= decoding keys)
- the actual data
The first byte usually does not matter - if you're just sending text you are only using the text type. It will be 1000 0001 (or 129) in that case.
The second byte and the additional two or eight bytes need some parsing, because you need to know how many bytes are used for the length (you need to know where the real data starts). The length itself is usually not necessary since you have the data already.
The first bit of the second byte is always 1 which means the data is masked (= encoded). Messages from the client to the server are always masked. You need to remove that first bit by doing secondByte AND 0111 1111. There are two cases in which the resulting byte does not represent the length because it did not fit in the second byte:
- a second byte of
0111 1110, or126, means the following two bytes are used for the length - a second byte of
0111 1111, or127, means the following eight bytes are used for the length
The four mask bytes are used for decoding the actual data that has been sent. The algorithm for decoding is as follows:
decodedByte = encodedByte XOR masks[encodedByteIndex MOD 4]
where encodedByte is the original byte in the data, encodedByteIndex is the index (offset) of the byte counting from the first byte of the real data, which has index 0. masks is an array containing of the four mask bytes.
This leads to the following pseudocode for decoding:
secondByte = bytes[1]
length = secondByte AND 127 // may not be the actual length in the two special cases
indexFirstMask = 2 // if not a special case
if length == 126 // if a special case, change indexFirstMask
indexFirstMask = 4
else if length == 127 // ditto
indexFirstMask = 10
masks = bytes.slice(indexFirstMask, 4) // four bytes starting from indexFirstMask
indexFirstDataByte = indexFirstMask + 4 // four bytes further
decoded = new array
decoded.length = bytes.length - indexFirstDataByte // length of real data
for i = indexFirstDataByte, j = 0; i < bytes.length; i++, j++
decoded[j] = bytes[i] XOR masks[j MOD 4]
// now use "decoded" to interpret the received data
Java implementation (if any one requires)
Reading : Client to Server
int len = 0;
byte[] b = new byte[buffLenth];
//rawIn is a Socket.getInputStream();
while(true){
len = rawIn.read(b);
if(len!=-1){
byte rLength = 0;
int rMaskIndex = 2;
int rDataStart = 0;
//b[0] is always text in my case so no need to check;
byte data = b[1];
byte op = (byte) 127;
rLength = (byte) (data & op);
if(rLength==(byte)126) rMaskIndex=4;
if(rLength==(byte)127) rMaskIndex=10;
byte[] masks = new byte[4];
int j=0;
int i=0;
for(i=rMaskIndex;i<(rMaskIndex+4);i++){
masks[j] = b[i];
j++;
}
rDataStart = rMaskIndex + 4;
int messLen = len - rDataStart;
byte[] message = new byte[messLen];
for(i=rDataStart, j=0; i<len; i++, j++){
message[j] = (byte) (b[i] ^ masks[j % 4]);
}
parseMessage(new String(message));
//parseMessage(new String(b));
b = new byte[buffLenth];
}
}
Writing : Server to Client
public void brodcast(String mess) throws IOException{
byte[] rawData = mess.getBytes();
int frameCount = 0;
byte[] frame = new byte[10];
frame[0] = (byte) 129;
if(rawData.length <= 125){
frame[1] = (byte) rawData.length;
frameCount = 2;
}else if(rawData.length >= 126 && rawData.length <= 65535){
frame[1] = (byte) 126;
int len = rawData.length;
frame[2] = (byte)((len >> 8 ) & (byte)255);
frame[3] = (byte)(len & (byte)255);
frameCount = 4;
}else{
frame[1] = (byte) 127;
int len = rawData.length;
frame[2] = (byte)((len >> 56 ) & (byte)255);
frame[3] = (byte)((len >> 48 ) & (byte)255);
frame[4] = (byte)((len >> 40 ) & (byte)255);
frame[5] = (byte)((len >> 32 ) & (byte)255);
frame[6] = (byte)((len >> 24 ) & (byte)255);
frame[7] = (byte)((len >> 16 ) & (byte)255);
frame[8] = (byte)((len >> 8 ) & (byte)255);
frame[9] = (byte)(len & (byte)255);
frameCount = 10;
}
int bLength = frameCount + rawData.length;
byte[] reply = new byte[bLength];
int bLim = 0;
for(int i=0; i<frameCount;i++){
reply[bLim] = frame[i];
bLim++;
}
for(int i=0; i<rawData.length;i++){
reply[bLim] = rawData[i];
bLim++;
}
out.write(reply);
out.flush();
}
JavaScript implementation:
function encodeWebSocket(bytesRaw){
var bytesFormatted = new Array();
bytesFormatted[0] = 129;
if (bytesRaw.length <= 125) {
bytesFormatted[1] = bytesRaw.length;
} else if (bytesRaw.length >= 126 && bytesRaw.length <= 65535) {
bytesFormatted[1] = 126;
bytesFormatted[2] = ( bytesRaw.length >> 8 ) & 255;
bytesFormatted[3] = ( bytesRaw.length ) & 255;
} else {
bytesFormatted[1] = 127;
bytesFormatted[2] = ( bytesRaw.length >> 56 ) & 255;
bytesFormatted[3] = ( bytesRaw.length >> 48 ) & 255;
bytesFormatted[4] = ( bytesRaw.length >> 40 ) & 255;
bytesFormatted[5] = ( bytesRaw.length >> 32 ) & 255;
bytesFormatted[6] = ( bytesRaw.length >> 24 ) & 255;
bytesFormatted[7] = ( bytesRaw.length >> 16 ) & 255;
bytesFormatted[8] = ( bytesRaw.length >> 8 ) & 255;
bytesFormatted[9] = ( bytesRaw.length ) & 255;
}
for (var i = 0; i < bytesRaw.length; i++){
bytesFormatted.push(bytesRaw.charCodeAt(i));
}
return bytesFormatted;
}
function decodeWebSocket (data){
var datalength = data[1] & 127;
var indexFirstMask = 2;
if (datalength == 126) {
indexFirstMask = 4;
} else if (datalength == 127) {
indexFirstMask = 10;
}
var masks = data.slice(indexFirstMask,indexFirstMask + 4);
var i = indexFirstMask + 4;
var index = 0;
var output = "";
while (i < data.length) {
output += String.fromCharCode(data[i++] ^ masks[index++ % 4]);
}
return output;
}