tcpdump: how to get grepable output?

For those like you who cannot use ngrep, here's how to use awk to make the tcpdump output of packet contents grepable.

First some sample output as provided by tcpdump -x, in order to present the task ahead:

$ tcpdump -xr dump.pcap 2>/dev/null
12:04:59.590664 IP 10.17.14.93.51009 > 239.194.1.9.51009: UDP, length 370
        0x0000:  4500 018e 0000 4000 fa11 7625 0a11 0e5d
        0x0010:  efc2 0109 c741 c741 017a 6f28 1120 2020
        0x0020:  3337 3030 3039 3031 3835 3635 3430 3130
...

And this is the copy-and-pastable awk script you can pipe the output to

awk '{ if (match($0, /^[0-9]/, _)) { printf (NR == 1 ? "%s " : "\n%s "), $0; fflush() } else { sub(/^\s+0x[0-9a-z]+:\s+/, " "); gsub(" ", ""); printf "%s", $0 } } END { print ""; fflush() }'

in order to get the following, grepable output

12:04:59.590664 IP 10.17.14.93.51009 > 239.194.1.9.51009: UDP, length 370 4500018e00004000fa1176250a...
12:04:59.590798 IP 10.17.14.113.51011 > 239.194.1.11.51011: UDP, length 370 4500018e00004000fa11760f...
...

Below is a commented version of above script:

awk '{
    # if this is a header line
    if (match($0, /^[0-9]/, _)) {
        # print the header, but:

        # except for the first line,
        # we need to insert a newline,
        # as the preceding data lines will
        # have been stripped of theirs

        # we also append a space to
        # separate header info from the
        # data that will get appended
        printf (NR == 1 ? "%s " : "\n%s "), $0
        # enforce line-buffering
        fflush()
    }
    # otherwise it is a data line
    else {
        # remove the data address
        sub(/^\s+0x[0-9a-z]+:\s+/, " ");
        # remove all spaces
        gsub(" ", "");
        # print w/o newline
        printf "%s", $0 
    }
}
END {
    # print final newline, as
    # the preceding data lines will
    # have been stripped of theirs
    print ""
    # enforce line-buffering
    fflush()
}'

From the tcpdump manpage:

-A      Print each packet (minus its link level header) in ASCII.  Handy
        for capturing web pages.

Make sure you also use the -s 0 option to make sure the entire packet is displayed.