Dual monitors not working with an Nvidia card

Solution 1:

I solved this problem a few minutes ago on my system. For me it worked in the following way:

1. Installed the post-release nvidia-driver.
2. Start the nvidia-settings to configure my dual-screen, there you have to use the TwinView (not the seperate X-Config) and don't forget to choose a primary monitor. The problem I encountered during the config was, that I it only seems to work if I choose the left monitor as primary. To Test you can use the Apply-Button. If everything works you can save to X Configuration File.

Here my resulting xorg.conf if you want to read it:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 280.13  (buildd@rothera)  Thu Aug 11 17:28:49 UTC 2011

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0" EndSection

Section "Files" EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5" EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd" EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SMS22A350H"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS" EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTS 450" EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-1"
    Option         "metamodes" "CRT: nvidia-auto-select +1920+0, DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection EndSection