Why does java wait so long to run the garbage collector?

I am building a Java web app, using the Play! Framework. I'm hosting it on playapps.net. I have been puzzling for a while over the provided graphs of memory consumption. Here is a sample:

The graph comes from a period of consistent but nominal activity. I did nothing to trigger the falloff in memory, so I presume this occurred because the garbage collector ran as it has almost reached its allowable memory consumption.

My questions:

• Is it fair for me to assume that my application does not have a memory leak, as it appears that all the memory is correctly reclaimed by the garbage collector when it does run?
• (from the title) Why is java waiting until the last possible second to run the garbage collector? I am seeing significant performance degradation as the memory consumption grows to the top fourth of the graph.
• If my assertions above are correct, then how can I go about fixing this issue? The other posts I have read on SO seem opposed to calls to System.gc(), ranging from neutral ("it's only a request to run GC, so the JVM may just ignore you") to outright opposed ("code that relies on System.gc() is fundamentally broken"). Or am I off base here, and I should be looking for defects in my own code that is causing this behavior and intermittent performance loss?

UPDATE
I have opened a discussion on PlayApps.net pointing to this question and mentioning some of the points here; specifically @Affe's comment regarding the settings for a full GC being set very conservatively, and @G_H's comment about settings for the initial and max heap size.

Here's a link to the discussion, though you unfortunately need a playapps account to view it.

I will report the feedback here when I get it; thanks so much everyone for your answers, I've already learned a great deal from them!

Resolution
Playapps support, which is still great, didn't have many suggestions for me, their only thought being that if I was using the cache extensively this may be keeping objects alive longer than need be, but that isn't the case. I still learned a ton (woo hoo!), and I gave @Ryan Amos the green check as I took his suggestion of calling System.gc() every half day, which for now is working fine.

Solution 1:

Any detailed answer is going to depend on which garbage collector you're using, but there are some things that are basically the same across all (modern, sun/oracle) GCs.

Every time you see the usage in the graph go down, that is a garbage collection. The only way heap gets freed is through garbage collection. The thing is there are two types of garbage collections, minor and full. The heap gets divided into two basic "areas." Young and tenured. (There are lots more subgroups in reality.) Anything that is taking up space in Young and is still in use when the minor GC comes along to free up some memory, is going to get 'promoted' into tenured. Once something makes the leap into tenured, it sits around indefinitely until the heap has no free space and a full garbage collection is necessary.

So one interpretation of that graph is that your young generation is fairly small (by default it can be a fairly small % of total heap on some JVMs) and you're keeping objects "alive" for comparatively very long times. (perhaps you're holding references to them in the web session?) So your objects are 'surviving' garbage collections until they get promoted into tenured space, where they stick around indefinitely until the JVM is well and good truly out of memory.

Again, that's just one common situation that fits with the data you have. Would need full details about the JVM configuration and the GC logs to really tell for sure what's going on.

Solution 2:

Java won't run the garbage cleaner until it has to, because the garbage cleaner slows things down quite a bit and shouldn't be run that frequently. I think you would be OK to schedule a cleaning more frequently, such as every 3 hours. If an application never consumes full memory, there should be no reason to ever run the garbage cleaner, which is why Java only runs it when the memory is very high.

So basically, don't worry about what others say: do what works best. If you find performance improvements from running the garbage cleaner at 66% memory, do it.

Solution 3:

I am noticing that the graph isn't sloping strictly upward until the drop, but has smaller local variations. Although I'm not certain, I don't think memory use would show these small drops if there was no garbage collection going on.

There are minor and major collections in Java. Minor collections occur frequently, whereas major collections are rarer and diminish performance more. Minor collections probably tend to sweep up stuff like short-lived object instances created within methods. A major collection will remove a lot more, which is what probably happened at the end of your graph.

Now, some answers that were posted while I'm typing this give good explanations regarding the differences in garbage collectors, object generations and more. But that still doesn't explain why it would take so absurdly long (nearly 24 hours) before a serious cleaning is done.

Two things of interest that can be set for a JVM at startup are the maximum allowed heap size, and the initial heap size. The maximum is a hard limit, once you reach that, further garbage collection doesn't reduce memory usage and if you need to allocate new space for objects or other data, you'll get an OutOfMemoryError. However, internally there's a soft limit as well: the current heap size. A JVM doesn't immediately gobble up the maximum amount of memory. Instead, it starts at your initial heap size and then increases the heap when it's needed. Think of it a bit as the RAM of your JVM, that can increase dynamically.

If the actual memory use of your application starts to reach the current heap size, a garbage collection will typically be instigated. This might reduce the memory use, so an increase in heap size isn't needed. But it's also possible that the application currently does need all that memory and would exceed the heap size. In that case, it is increased provided that it hasn't already reached the maximum set limit.

Now, what might be your case is that the initial heap size is set to the same value as the maximum. Suppose that would be so, then the JVM will immediately seize all that memory. It will take a very long time before the application has accumulated enough garbage to reach the heap size in memory usage. But at that moment you'll see a large collection. Starting with a small enough heap and allowing it to grow keeps the memory use limited to what's needed.

This is assuming that your graph shows heap use and not allocated heap size. If that's not the case and you are actually seeing the heap itself grow like this, something else is going on. I'll admit I'm not savvy enough regarding the internals of garbage collection and its scheduling to be absolutely certain of what's happening here, most of this is from observation of leaking applications in profilers. So if I've provided faulty info, I'll take this answer down.

Solution 4:

As you might have noticed, this does not affect you. The garbage collection only kicks in if the JVM feels there is a need for it to run and this happens for the sake of optimization, there's no use of doing many small collections if you can make a single full collection and do a full cleanup.

The current JVM contains some really interesting algorithms and the garbage collection itself id divided into 3 different regions, you can find a lot more about this here, here's a sample:

Three types of collection algorithms

The HotSpot JVM provides three GC algorithms, each tuned for a specific type of collection within a specific generation. The copy (also known as scavenge) collection quickly cleans up short-lived objects in the new generation heap. The mark-compact algorithm employs a slower, more robust technique to collect longer-lived objects in the old generation heap. The incremental algorithm attempts to improve old generation collection by performing robust GC while minimizing pauses.

Copy/scavenge collection

Using the copy algorithm, the JVM reclaims most objects in the new generation object space (also known as eden) simply by making small scavenges -- a Java term for collecting and removing refuse. Longer-lived objects are ultimately copied, or tenured, into the old object space.

Mark-compact collection

As more objects become tenured, the old object space begins to reach maximum occupancy. The mark-compact algorithm, used to collect objects in the old object space, has different requirements than the copy collection algorithm used in the new object space.

The mark-compact algorithm first scans all objects, marking all reachable objects. It then compacts all remaining gaps of dead objects. The mark-compact algorithm occupies more time than the copy collection algorithm; however, it requires less memory and eliminates memory fragmentation.

Incremental (train) collection

The new generation copy/scavenge and the old generation mark-compact algorithms can't eliminate all JVM pauses. Such pauses are proportional to the number of live objects. To address the need for pauseless GC, the HotSpot JVM also offers incremental, or train, collection.

Incremental collection breaks up old object collection pauses into many tiny pauses even with large object areas. Instead of just a new and an old generation, this algorithm has a middle generation comprising many small spaces. There is some overhead associated with incremental collection; you might see as much as a 10-percent speed degradation.

The -Xincgc and -Xnoincgc parameters control how you use incremental collection. The next release of HotSpot JVM, version 1.4, will attempt continuous, pauseless GC that will probably be a variation of the incremental algorithm. I won't discuss incremental collection since it will soon change.

This generational garbage collector is one of the most efficient solutions we have for the problem nowadays.