How can I auto-elevate my batch file, so that it requests from UAC administrator rights if required?

I want my batch file to only run elevated. If not elevated, provide an option for the user to relaunch batch as elevated.

I'm writing a batch file to set a system variable, copy two files to a Program Files location, and start a driver installer. If a Windows 7/Windows Vista user (UAC enabled and even if they are a local admin) runs it without right-clicking and selecting "Run as Administrator", they will get 'Access Denied' copying the two files and writing the system variable.

I would like to use a command to automatically restart the batch as elevated if the user is in fact an administrator. Otherwise, if they are not an administrator, I want to tell them that they need administrator privileges to run the batch file. I'm using xcopy to copy the files and REG ADD to write the system variable. I'm using those commands to deal with possible Windows XP machines. I've found similar questions on this topic, but nothing that deals with relaunching a batch file as elevated.


Solution 1:

There is an easy way without the need to use an external tool - it runs fine with Windows 7, 8, 8.1 and 10 and is backwards-compatible too (Windows XP doesn't have any UAC, thus elevation is not needed - in that case the script just proceeds).

Check out this code (I was inspired by the code by NIronwolf posted in the thread Batch File - "Access Denied" On Windows 7?), but I've improved it - in my version there isn't any directory created and removed to check for administrator privileges):

::::::::::::::::::::::::::::::::::::::::::::
:: Elevate.cmd - Version 4
:: Automatically check & get admin rights
:: see "https://stackoverflow.com/a/12264592/1016343" for description
::::::::::::::::::::::::::::::::::::::::::::
 @echo off
 CLS
 ECHO.
 ECHO =============================
 ECHO Running Admin shell
 ECHO =============================

:init
 setlocal DisableDelayedExpansion
 set cmdInvoke=1
 set winSysFolder=System32
 set "batchPath=%~0"
 for %%k in (%0) do set batchName=%%~nk
 set "vbsGetPrivileges=%temp%\OEgetPriv_%batchName%.vbs"
 setlocal EnableDelayedExpansion

:checkPrivileges
  NET FILE 1>NUL 2>NUL
  if '%errorlevel%' == '0' ( goto gotPrivileges ) else ( goto getPrivileges )

:getPrivileges
  if '%1'=='ELEV' (echo ELEV & shift /1 & goto gotPrivileges)
  ECHO.
  ECHO **************************************
  ECHO Invoking UAC for Privilege Escalation
  ECHO **************************************

  ECHO Set UAC = CreateObject^("Shell.Application"^) > "%vbsGetPrivileges%"
  ECHO args = "ELEV " >> "%vbsGetPrivileges%"
  ECHO For Each strArg in WScript.Arguments >> "%vbsGetPrivileges%"
  ECHO args = args ^& strArg ^& " "  >> "%vbsGetPrivileges%"
  ECHO Next >> "%vbsGetPrivileges%"

  if '%cmdInvoke%'=='1' goto InvokeCmd 

  ECHO UAC.ShellExecute "!batchPath!", args, "", "runas", 1 >> "%vbsGetPrivileges%"
  goto ExecElevation

:InvokeCmd
  ECHO args = "/c """ + "!batchPath!" + """ " + args >> "%vbsGetPrivileges%"
  ECHO UAC.ShellExecute "%SystemRoot%\%winSysFolder%\cmd.exe", args, "", "runas", 1 >> "%vbsGetPrivileges%"

:ExecElevation
 "%SystemRoot%\%winSysFolder%\WScript.exe" "%vbsGetPrivileges%" %*
 exit /B

:gotPrivileges
 setlocal & cd /d %~dp0
 if '%1'=='ELEV' (del "%vbsGetPrivileges%" 1>nul 2>nul  &  shift /1)

 ::::::::::::::::::::::::::::
 ::START
 ::::::::::::::::::::::::::::
 REM Run shell as admin (example) - put here code as you like
 ECHO %batchName% Arguments: P1=%1 P2=%2 P3=%3 P4=%4 P5=%5 P6=%6 P7=%7 P8=%8 P9=%9
 cmd /k

The script takes advantage of the fact that NET FILE requires administrator privilege and returns errorlevel 1 if you don't have it. The elevation is achieved by creating a script which re-launches the batch file to obtain privileges. This causes Windows to present the UAC dialog and asks you for the administrator account and password.

I have tested it with Windows 7, 8, 8.1, 10 and with Windows XP - it works fine for all. The advantage is, after the start point you can place anything that requires system administrator privileges, for example, if you intend to re-install and re-run a Windows service for debugging purposes (assumed that mypackage.msi is a service installer package):

msiexec /passive /x mypackage.msi
msiexec /passive /i mypackage.msi
net start myservice

Without this privilege elevating script, UAC would ask you three times for your administrator user and password - now you're asked only once at the beginning, and only if required.


If your script just needs to show an error message and exit if there aren't any administrator privileges instead of auto-elevating, this is even simpler: You can achieve this by adding the following at the beginning of your script:

@ECHO OFF & CLS & ECHO.
NET FILE 1>NUL 2>NUL & IF ERRORLEVEL 1 (ECHO You must right-click and select &
  ECHO "RUN AS ADMINISTRATOR"  to run this batch. Exiting... & ECHO. &
  PAUSE & EXIT /D)
REM ... proceed here with admin rights ...

This way, the user has to right-click and select "Run as administrator". The script will proceed after the REM statement if it detects administrator rights, otherwise exit with an error. If you don't require the PAUSE, just remove it. Important: NET FILE [...] EXIT /D) must be on the same line. It is displayed here in multiple lines for better readability!


On some machines, I've encountered issues, which are solved in the new version above already. One was due to different double quote handling, and the other issue was due to the fact that UAC was disabled (set to lowest level) on a Windows 7 machine, hence the script calls itself again and again.

I have fixed this now by stripping the quotes in the path and re-adding them later, and I've added an extra parameter which is added when the script re-launches with elevated rights.

The double quotes are removed by the following (details are here):

setlocal DisableDelayedExpansion
set "batchPath=%~0"
setlocal EnableDelayedExpansion

You can then access the path by using !batchPath!. It doesn't contain any double quotes, so it is safe to say "!batchPath!" later in the script.

The line

if '%1'=='ELEV' (shift & goto gotPrivileges)

checks if the script has already been called by the VBScript script to elevate rights, hence avoiding endless recursions. It removes the parameter using shift.


Update:

  • To avoid having to register the .vbs extension in Windows 10, I have replaced the line
    "%temp%\OEgetPrivileges.vbs"
    by
    "%SystemRoot%\System32\WScript.exe" "%temp%\OEgetPrivileges.vbs"
    in the script above; also added cd /d %~dp0 as suggested by Stephen (separate answer) and by Tomáš Zato (comment) to set script directory as default.

  • Now the script honors command line parameters being passed to it. Thanks to jxmallet, TanisDLJ and Peter Mortensen for observations and inspirations.

  • According to Artjom B.'s hint, I analyzed it and have replaced SHIFT by SHIFT /1, which preserves the file name for the %0 parameter

  • Added del "%temp%\OEgetPrivileges_%batchName%.vbs" to the :gotPrivileges section to clean up (as mlt suggested). Added %batchName% to avoid impact if you run different batches in parallel. Note that you need to use for to be able to take advantage of the advanced string functions, such as %%~nk, which extracts just the filename.

  • Optimized script structure, improvements (added variable vbsGetPrivileges which is now referenced everywhere allowing to change the path or name of the file easily, only delete .vbs file if batch needed to be elevated)

  • In some cases, a different calling syntax was required for elevation. If the script does not work, check the following parameters:
    set cmdInvoke=0
    set winSysFolder=System32
    Either change the 1st parameter to set cmdInvoke=1 and check if that already fixes the issue. It will add cmd.exe to the script performing the elevation.
    Or try to change the 2nd parameter to winSysFolder=Sysnative, this might help (but is in most cases not required) on 64 bit systems. (ADBailey has reported this). "Sysnative" is only required for launching 64-bit applications from a 32-bit script host (e.g. a Visual Studio build process, or script invocation from another 32-bit application).

  • To make it more clear how the parameters are interpreted, I am displaying it now like P1=value1 P2=value2 ... P9=value9. This is especially useful if you need to enclose parameters like paths in double quotes, e.g. "C:\Program Files".

  • If you want to debug the VBS script, you can add the //X parameter to WScript.exe as first parameter, as suggested here (it is described for CScript.exe, but works for WScript.exe too).

Useful links:

  • Meaning of special characters in batch file:
    Quotes ("), Bang (!), Caret (^), Ampersand (&), Other special characters

Solution 2:

As jcoder and Matt mentioned, PowerShell made it easy, and it could even be embedded in the batch script without creating a new script.

I modified Matt's script:

:: Check privileges 
net file 1>NUL 2>NUL
if not '%errorlevel%' == '0' (
    powershell Start-Process -FilePath "%0" -ArgumentList "%cd%" -verb runas >NUL 2>&1
    exit /b
)

:: Change directory with passed argument. Processes started with
:: "runas" start with forced C:\Windows\System32 workdir
cd /d %1

:: Actual work

Solution 3:

I do it this way:

NET SESSION
IF %ERRORLEVEL% NEQ 0 GOTO ELEVATE
GOTO ADMINTASKS

:ELEVATE
CD /d %~dp0
MSHTA "javascript: var shell = new ActiveXObject('shell.application'); shell.ShellExecute('%~nx0', '', '', 'runas', 1);close();"
EXIT

:ADMINTASKS
(Do whatever you need to do here)
EXIT

This way it's simple and use only windows default commands. It's great if you need to redistribute you batch file.

CD /d %~dp0 Sets the current directory to the file's current directory (if it is not already, regardless of the drive the file is in, thanks to the /d option).

%~nx0 Returns the current filename with extension (If you don't include the extension and there is an exe with the same name on the folder, it will call the exe).

There are so many replies on this post I don't even know if my reply will be seen.

Anyway, I find this way simpler than the other solutions proposed on the other answers, I hope it helps someone.