How do I start up remote debugging with PyCharm?

Solution 1:

PyCharm (or your ide of choice) acts as the "server" and your application is the "client"; so you start the server first - tell the IDE to 'debug' - then run the client - which is some code with the settrace statement in it. When your python code hits the settrace it connects to the server - pycharm - and starts feeding it the debug data.

To make this happen:

1. copy the pydev library to the remote machine

So I had to copy the file from C:\Program Files\JetBrains\PyCharm 1.5.3\pycharm-debug.egg to my linux machine. I put it at /home/john/api-dependancies/pycharm-debug.egg

2. Put the egg in the PYTHONPATH

Hopefully you appreciate that you're not going to be able to use the egg unless python can find it. I guess most people use easy_install but in my instance I added it explicitly by putting this:

   import sys
   sys.path.append('/home/john/app-dependancies/pycharm-debug.egg')

This is only necessary because I've still had no success installing an egg. This is my workaround.

3. setup the debug server config

In PyCharm you can configure the debug server via:

  • Run-> Edit Configurations: opens the 'Run/Debug Configurations' dialog
  • Defaults -> "Python Remote Debug": is the template to use
  • fill out the local host name and port and you'll probably want to 'use path mapping' but more on all this below...
  • "OK"

    Local host name: means the name of the server - that's the windows host machine in my case - or actually the IP Address of the windows host machine since the hostname is not known to my remote machine. So the virtual (remote) machine has to be able to reach the host. ping and netstat are good for this.

    Port: can be any vacant non-priviledged port you like. eg: 21000 is unlikely to be in use.

    Don't worry about the path mappings for now.

4. Start the debug server

  • Run-> Debug : start the debug server - choose the configuration you just created.

The debug console tab will appear and you should get

 Starting debug server at port 21000

in the console which means that the ide debug server is waiting for your code to open a connection to it.

5. Insert the code

This works inside a unit test:

from django.test import TestCase
class APITestCase(TestCase):
    def test_remote_debug(self):
        import sys
        sys.path.append('/home/john/dependancies/pycharm-debug.egg')
        from pydev import pydevd
        pydevd.settrace('192.168.33.1', port=21000, suspend=False)

        print "foo"

And in a django web application it's a bit finicky about where you put it - seems to work only after everything else is done:

if __name__ == "__main__":
    os.environ.setdefault("DJANGO_SETTINGS_MODULE", "settings")
    from django.core.management import execute_from_command_line
    execute_from_command_line(sys.argv)

    sys.path.append('/vagrant/pycharm-debug.egg')
    import pydevd
    pydevd.settrace('192.168.33.1', port=21000, suspend=False)

Again that the IP address is the box where you're running Pycharm on; you should be able to ping that ip address from the box running your code/website. The port is your choice, just make sure you've told pycharm to listen on the same port. And I found the suspend=False less problematic than the defaults of, not only immediately halting so you're not sure if it's working, but also trying to stream to stdin/out which might give you grief also.

6. Open the firewall

Windows 7 firewall will, by default, block your incoming connection. Using netstat on the remote host you'll be able to see that SYN_SENT never becomes ESTABLISHED, at least not until you add an exception to the windows firewall for the application 'pycharm'.

OS/X and Ubuntu do not have firewalls to punch threw (by default, someone may have applied one later).

7. Set a breakpoint and run the code

After all that, when everything goes to plan, you can set a breakpoint - somewhere after the settrace has run - and pycharm console will show

Connected to pydev debugger (build 107.386)

and under the 'Debugger' tab the variables stack will start working and you can step through the code.

8. Mappings

Mapping tell pycharm where it can find the source code. So when the debugger says "i'm running line 393 of file /foo/bar/nang.py, Pycharm can translate that remote absolute path into an absolute local path... and show you the source code.

/Users/john/code/app/    /opt/bestprice/app/
/Users/john/code/master/lib    /opt/bestprice/lib/python2.7/site-packages

Done.

Solution 2:

It is just a note , actually , but contains some info that may save hours.

  1. Right now pip install pydevd worked for me on both ubuntu and centos 6

  2. If you want to really debug remote server which is behind firewals and stuff, you can use the following trick:

    ssh -R  8081:localhost:8081 [email protected]
    

    This allows remote code to connect to your machine listening on localhost:8081

  3. If remote debugger does not want to start, saying it can't find socket port, check your firewall rules. Note that rule with 127.0.0.1 is not the same as localhost.