Direct Memory Access in Linux

I'm trying to access physical memory directly for an embedded Linux project, but I'm not sure how I can best designate memory for my use.

If I boot my device regularly, and access /dev/mem, I can easily read and write to just about anywhere I want. However, in this, I'm accessing memory that can easily be allocated to any process; which I don't want to do

My code for /dev/mem is (all error checking, etc. removed):

mem_fd = open("/dev/mem", O_RDWR));
mem_p = malloc(SIZE + (PAGE_SIZE - 1));
if ((unsigned long) mem_p % PAGE_SIZE) {
    mem_p += PAGE_SIZE - ((unsigned long) mem_p % PAGE_SIZE);
}
mem_p = (unsigned char *) mmap(mem_p, SIZE, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_FIXED, mem_fd, BASE_ADDRESS);

And this works. However, I'd like to be using memory that no one else will touch. I've tried limiting the amount of memory that the kernel sees by booting with mem=XXXm, and then setting BASE_ADDRESS to something above that (but below the physical memory), but it doesn't seem to be accessing the same memory consistently.

Based on what I've seen online, I suspect I may need a kernel module (which is OK) which uses either ioremap() or remap_pfn_range() (or both???), but I have absolutely no idea how; can anyone help?

EDIT: What I want is a way to always access the same physical memory (say, 1.5MB worth), and set that memory aside so that the kernel will not allocate it to any other process.

I'm trying to reproduce a system we had in other OSes (with no memory management) whereby I could allocate a space in memory via the linker, and access it using something like

*(unsigned char *)0x12345678

EDIT2: I guess I should provide some more detail. This memory space will be used for a RAM buffer for a high performance logging solution for an embedded application. In the systems we have, there's nothing that clears or scrambles physical memory during a soft reboot. Thus, if I write a bit to a physical address X, and reboot the system, the same bit will still be set after the reboot. This has been tested on the exact same hardware running VxWorks (this logic also works nicely in Nucleus RTOS and OS20 on different platforms, FWIW). My idea was to try the same thing in Linux by addressing physical memory directly; therefore, it's essential that I get the same addresses each boot.

I should probably clarify that this is for kernel 2.6.12 and newer.

EDIT3: Here's my code, first for the kernel module, then for the userspace application.

To use it, I boot with mem=95m, then insmod foo-module.ko, then mknod mknod /dev/foo c 32 0, then run foo-user , where it dies. Running under gdb shows that it dies at the assignment, although within gdb, I cannot dereference the address I get from mmap (although printf can)

foo-module.c

#include <linux/module.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <asm/io.h>

#define VERSION_STR "1.0.0"
#define FOO_BUFFER_SIZE (1u*1024u*1024u)
#define FOO_BUFFER_OFFSET (95u*1024u*1024u)
#define FOO_MAJOR 32
#define FOO_NAME "foo"

static const char *foo_version = "@(#) foo Support version " VERSION_STR " " __DATE__ " " __TIME__;

static void    *pt = NULL;

static int      foo_release(struct inode *inode, struct file *file);
static int      foo_open(struct inode *inode, struct file *file);
static int      foo_mmap(struct file *filp, struct vm_area_struct *vma);

struct file_operations foo_fops = {
    .owner = THIS_MODULE,
    .llseek = NULL,
    .read = NULL,
    .write = NULL,
    .readdir = NULL,
    .poll = NULL,
    .ioctl = NULL,
    .mmap = foo_mmap,
    .open = foo_open,
    .flush = NULL,
    .release = foo_release,
    .fsync = NULL,
    .fasync = NULL,
    .lock = NULL,
    .readv = NULL,
    .writev = NULL,
};

static int __init foo_init(void)
{
    int             i;
    printk(KERN_NOTICE "Loading foo support module\n");
    printk(KERN_INFO "Version %s\n", foo_version);
    printk(KERN_INFO "Preparing device /dev/foo\n");
    i = register_chrdev(FOO_MAJOR, FOO_NAME, &foo_fops);
    if (i != 0) {
        return -EIO;
        printk(KERN_ERR "Device couldn't be registered!");
    }
    printk(KERN_NOTICE "Device ready.\n");
    printk(KERN_NOTICE "Make sure to run mknod /dev/foo c %d 0\n", FOO_MAJOR);
    printk(KERN_INFO "Allocating memory\n");
    pt = ioremap(FOO_BUFFER_OFFSET, FOO_BUFFER_SIZE);
    if (pt == NULL) {
        printk(KERN_ERR "Unable to remap memory\n");
        return 1;
    }
    printk(KERN_INFO "ioremap returned %p\n", pt);
    return 0;
}
static void __exit foo_exit(void)
{
    printk(KERN_NOTICE "Unloading foo support module\n");
    unregister_chrdev(FOO_MAJOR, FOO_NAME);
    if (pt != NULL) {
        printk(KERN_INFO "Unmapping memory at %p\n", pt);
        iounmap(pt);
    } else {
        printk(KERN_WARNING "No memory to unmap!\n");
    }
    return;
}
static int foo_open(struct inode *inode, struct file *file)
{
    printk("foo_open\n");
    return 0;
}
static int foo_release(struct inode *inode, struct file *file)
{
    printk("foo_release\n");
    return 0;
}
static int foo_mmap(struct file *filp, struct vm_area_struct *vma)
{
    int             ret;
    if (pt == NULL) {
        printk(KERN_ERR "Memory not mapped!\n");
        return -EAGAIN;
    }
    if ((vma->vm_end - vma->vm_start) != FOO_BUFFER_SIZE) {
        printk(KERN_ERR "Error: sizes don't match (buffer size = %d, requested size = %lu)\n", FOO_BUFFER_SIZE, vma->vm_end - vma->vm_start);
        return -EAGAIN;
    }
    ret = remap_pfn_range(vma, vma->vm_start, (unsigned long) pt, vma->vm_end - vma->vm_start, PAGE_SHARED);
    if (ret != 0) {
        printk(KERN_ERR "Error in calling remap_pfn_range: returned %d\n", ret);
        return -EAGAIN;
    }
    return 0;
}
module_init(foo_init);
module_exit(foo_exit);
MODULE_AUTHOR("Mike Miller");
MODULE_LICENSE("NONE");
MODULE_VERSION(VERSION_STR);
MODULE_DESCRIPTION("Provides support for foo to access direct memory");

foo-user.c

#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <sys/mman.h>

int main(void)
{
    int             fd;
    char           *mptr;
    fd = open("/dev/foo", O_RDWR | O_SYNC);
    if (fd == -1) {
        printf("open error...\n");
        return 1;
    }
    mptr = mmap(0, 1 * 1024 * 1024, PROT_READ | PROT_WRITE, MAP_FILE | MAP_SHARED, fd, 4096);
    printf("On start, mptr points to 0x%lX.\n",(unsigned long) mptr);
    printf("mptr points to 0x%lX. *mptr = 0x%X\n", (unsigned long) mptr, *mptr);
    mptr[0] = 'a';
    mptr[1] = 'b';
    printf("mptr points to 0x%lX. *mptr = 0x%X\n", (unsigned long) mptr, *mptr);
    close(fd);
    return 0;
}

I think you can find a lot of documentation about the kmalloc + mmap part. However, I am not sure that you can kmalloc so much memory in a contiguous way, and have it always at the same place. Sure, if everything is always the same, then you might get a constant address. However, each time you change the kernel code, you will get a different address, so I would not go with the kmalloc solution.

I think you should reserve some memory at boot time, ie reserve some physical memory so that is is not touched by the kernel. Then you can ioremap this memory which will give you a kernel virtual address, and then you can mmap it and write a nice device driver.

This take us back to linux device drivers in PDF format. Have a look at chapter 15, it is describing this technique on page 443

Edit : ioremap and mmap. I think this might be easier to debug doing things in two step : first get the ioremap right, and test it using a character device operation, ie read/write. Once you know you can safely have access to the whole ioremapped memory using read / write, then you try to mmap the whole ioremapped range.

And if you get in trouble may be post another question about mmaping

Edit : remap_pfn_range ioremap returns a virtual_adress, which you must convert to a pfn for remap_pfn_ranges. Now, I don't understand exactly what a pfn (Page Frame Number) is, but I think you can get one calling

virt_to_phys(pt) >> PAGE_SHIFT

This probably is not the Right Way (tm) to do it, but you should try it

You should also check that FOO_MEM_OFFSET is the physical address of your RAM block. Ie before anything happens with the mmu, your memory is available at 0 in the memory map of your processor.

Sorry to answer but not quite answer, I noticed that you have already edited the question. Please note that SO does not notify us when you edit the question. I'm giving a generic answer here, when you update the question please leave a comment, then I'll edit my answer.

Yes, you're going to need to write a module. What it comes down to is the use of kmalloc() (allocating a region in kernel space) or vmalloc() (allocating a region in userspace).

Exposing the prior is easy, exposing the latter can be a pain in the rear with the kind of interface that you are describing as needed. You noted 1.5 MB is a rough estimate of how much you actually need to reserve, is that iron clad? I.e are you comfortable taking that from kernel space? Can you adequately deal with ENOMEM or EIO from userspace (or even disk sleep)? IOW, what's going into this region?

Also, is concurrency going to be an issue with this? If so, are you going to be using a futex? If the answer to either is 'yes' (especially the latter), its likely that you'll have to bite the bullet and go with vmalloc() (or risk kernel rot from within). Also, if you are even THINKING about an ioctl() interface to the char device (especially for some ad-hoc locking idea), you really want to go with vmalloc().

Also, have you read this? Plus we aren't even touching on what grsec / selinux is going to think of this (if in use).

/dev/mem is okay for simple register peeks and pokes, but once you cross into interrupts and DMA territory, you really should write a kernel-mode driver. What you did for your previous memory-management-less OSes simply doesn't graft well to an General Purpose OS like Linux.

You've already thought about the DMA buffer allocation issue. Now, think about the "DMA done" interrupt from your device. How are you going to install an Interrupt Service Routine?

Besides, /dev/mem is typically locked out for non-root users, so it's not very practical for general use. Sure, you could chmod it, but then you've opened a big security hole in the system.

If you are trying to keep the driver code base similar between the OSes, you should consider refactoring it into separate user & kernel mode layers with an IOCTL-like interface in-between. If you write the user-mode portion as a generic library of C code, it should be easy to port between Linux and other OSes. The OS-specific part is the kernel-mode code. (We use this kind of approach for our drivers.)

It seems like you have already concluded that it's time to write a kernel-driver, so you're on the right track. The only advice I can add is to read these books cover-to-cover.

Linux Device Drivers

Understanding the Linux Kernel

(Keep in mind that these books are circa-2005, so the information is a bit dated.)