External display on MacBook Pro Retina (Mountain Lion) remains blank after screen timeout or waking up from sleep
I have a retina MacBook Pro running Mountain Lion with a 23" external display attached through the Thunderbolt port (DVI/Display Port adapter). I have the monitor configured as an extension to my internal display (arranged just above as it actually is placed on my desk).
The arrangement works very well. However, sometimes (~30-40% of the time) the external display remains blank if the MacBook Pro screens have timed out or the MacBook Pro has gone to sleep and I then wake the MacBook Pro (by pressing a key). The MacBook Pro still thinks that the external display is connected as the screen remains in extended mode and apps are also there (though invisible, if that's where they were placed before the screen/MacBook Pro went to sleep). If I disconnect/reconnect the display port (Thunderbolt), it does go to internal only, but I cannot get the external display back unless I restart the Mac. Any ideas?
To get the display back without rebooting, I've had success doing this:
- Disconnect the display
- Wait until the display goes to sleep (set the timeout to 1 minute first)
- Reconnect the display
To avoid the issue altogether, I've gotten into the habit of disconnecting the display before I leave the Mac.
I've decided there's a strong correlation (though not a very high sigma) between a monitor being on Thunderbolt port #2, and having this problem occur.
Thunderbolt port 2 is the one closest to you when sitting in front of the keyboard (Route String 3).
This would seem to indicate a hardware issue, whether or not it can be fixed in firmware/software is unknown. Also unknown is whether this issue occurs on all port 2s, or whether there's a quality issue on these ports in general (maybe not all Retina MacBook Pros have this problem?).
It's certainly distressing, since I shelled out on a 3k piece of hardware I want to last 3 or 4 years and there's a strong likelihood I'm just going to have this problem forever.