SSH not working over IPSec tunnel (Strongswan)

I configured a small network on a cloud virtual machine. This virtual machine has a static IP address assigned to eth0 interface that I'll call $EXTIP. mydomain.com points to $EXTIP. Inside, I have some linux containers, that get their ip through DHCP in the Subnet 10.0.0.0/24 (i called the virtual interface nat ). They run some services that can be reached through DNAT. Then I wanted to connect to these containers through an IPSec tunnel, so I configured StrongSwan.

ipsec.conf:

conn %default
        dpdaction=none
        rekey=no

conn remote
        keyexchange=ikev2
        ike=########
        left=[$EXTIP]
        leftsubnet=10.0.1.0/24,10.0.0.0/24
        leftauth=pubkey
        lefthostaccess=yes
        leftcert=########.pem
        leftfirewall=yes
        leftid="#########"
        right=%any
        rightsourceip=10.0.1.0/24
        rightauth=########
        rightid=%any
        rightsendcert=never
        eap_identity=%any
        auto=add
        type=tunnel

Everything works fine, IPSec clients get IPs of the 10.0.1.0/24 subnet and can reach the containers subnet. My problem is that I'm not able to get SSH connections over the tunnel. It simply does not work, ssh client does not produce any output. Sniffing with tcpdump gives:

tcpdump:

09:50:29.648206 ARP, Request who-has 10.0.0.1 tell mydomain.com, length 28
09:50:29.648246 ARP, Reply 10.0.0.1 is-at 00:ff:aa:00:00:01 (oui Unknown), length 28
09:50:29.648253 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [S], seq 4007849772, win 29200, options [mss 1460,sackOK,TS val 1151153 ecr 0,nop,wscale 7], length 0
09:50:29.648296 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [S.], seq 2809522632, ack 4007849773, win 14480, options [mss 1460,sackOK,TS val 11482992 ecr 1151153,nop,wscale 6], length 0
09:50:29.677225 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 2809522633, win 229, options [nop,nop,TS val 1151162 ecr 11482992], length 0
09:50:29.679370 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [P.], seq 0:23, ack 1, win 229, options [nop,nop,TS val 1151162 ecr 11482992], length 23
09:50:29.679403 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], ack 24, win 227, options [nop,nop,TS val 11483002 ecr 1151162], length 0
09:50:29.684337 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1:32, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 31
09:50:29.685471 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 32:1480, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 1448
09:50:29.685519 IP mydomain.com > 10.0.0.1: ICMP mydomain.com unreachable - need to frag (mtu 1422), length 556
09:50:29.685567 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 32:1402, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 1370
09:50:29.685572 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 1402:1480, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 78
09:50:29.714601 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 32, win 229, options [nop,nop,TS val 1151173 ecr 11483003], length 0
09:50:29.714642 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1480:1600, ack 24, win 227, options [nop,nop,TS val 11483012 ecr 1151173], length 120
09:50:29.723649 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [P.], seq 1393:1959, ack 32, win 229, options [nop,nop,TS val 1151174 ecr 11483003], length 566
09:50:29.723677 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], ack 24, win 227, options [nop,nop,TS val 11483015 ecr 1151173,nop,nop,sack 1 {1394:1960}], length 0
09:50:29.725688 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 1480, win 251, options [nop,nop,TS val 1151177 ecr 11483003], length 0
09:50:29.952394 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1480:1600, ack 24, win 227, options [nop,nop,TS val 11483084 ecr 1151173,nop,nop,sack 1 {1394:1960}], length 120
09:50:29.981056 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 1600, win 251, options [nop,nop,TS val 1151253 ecr 11483084,nop,nop,sack 1 {1480:1600}], length 0

If you need it this is my iptables configuration file:

iptables:

*filter
:INPUT ACCEPT [144:9669]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [97:15649]
:interfacce-trusted - [0:0]
:porte-trusted - [0:0]
-A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -j interfacce-trusted
-A FORWARD -j porte-trusted
-A FORWARD -j REJECT --reject-with icmp-host-unreachable
-A FORWARD -d 10.0.0.1/32 -p tcp -m tcp --dport 80 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -d 10.0.0.1/32 -p tcp -m tcp --dport 443 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -d 10.0.0.3/32 -p tcp -m tcp --dport 1234 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A interfacce-trusted -i nat -j ACCEPT
-A porte-trusted -d 10.0.0.1/32 -p tcp -m tcp --dport 80 -j ACCEPT
-A porte-trusted -d 10.0.0.1/32 -p tcp -m tcp --dport 443 -j ACCEPT
-A porte-trusted -d 10.0.0.3/32 -p tcp -m tcp --dport 1234 -j ACCEPT
COMMIT
*nat
:PREROUTING ACCEPT [10:600]
:INPUT ACCEPT [10:600]
:OUTPUT ACCEPT [4:268]
:POSTROUTING ACCEPT [18:1108]
-A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.1:80
-A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 443 -j DNAT --to-destination 10.0.0.1:443
-A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 8069 -j DNAT --to-destination 10.0.0.3:1234
-A POSTROUTING -s 10.0.0.0/24 -o eth0 -m policy --dir out --pol ipsec -j ACCEPT
-A POSTROUTING -s 10.0.1.0/24 -o nat -j MASQUERADE
-A POSTROUTING -s 10.0.0.0/24 -o eth0 -j MASQUERADE
COMMIT

Probably I'm missing something stupid... Thanks in advance for helping :))

Solution 1:

The problem was packet fragmentation. With a simple rule in the mangle table to manage MSS I solved my problem :)

iptables -t mangle -A FORWARD -o eth0 -p tcp -m tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1361:1536 -j TCPMSS --set-mss 1360