Why is Windows giving my hard disk the letter C and not A or B for example?

Solution 1:

Wikipedia gives a good explanation about the logic of drive lettering:

Except for CP/M and early versions of MS-DOS, the operating systems assigns drive letters according to the following algorithm:

1. Assign the drive letter A: to the first floppy disk drive (drive 0), and B: to the second floppy disk drive (drive 1), if present.
2. Assign a drive letter, beginning with C: to the first active primary partition recognised upon the first physical hard disk.
3. Assign subsequent drive letters to the first primary partition upon each successive physical hard disk drive, if present within the system.
4. Assign subsequent drive letters to every recognised logical partition, beginning with the first hard drive and proceeding through successive physical hard disk drives, if present within the system.
5. Assign subsequent drive letters to any RAM Disk.
6. Assign subsequent drive letters to any additional floppy or optical disc drives.

Solution 2:

It's a left over from the original PC designs. Originally PCs only had up to 2 floppy disk drives labelled A and B. Some time later hard disks got added and became drive C.

Solution 3:

The hard disk letter is C because historically, drives A and B were for floppy disks. It has nothing to do with the language in which the operating system is written.

Solution 4:

Ah, floppy disks, remember those?

You could spend a whole afternoon coding your latest killer app, then find that you couldn't save it because it was too big to fit on a 5.25" single density disk.

That was when floppies really were floppy. Thin and flimsy, usually in either 5.25" or 8" sizes, though the first internal drives that appeared in PCs were 5.25". As previously mentioned, the early versions of MS Dos used to automatically assign drive A: to the first floppy drive and B: to the second. Hard drives didn't even fit into PCs back then. You could buy a 5mb Winchester Hard Disk that weighed about 30Kg and came in a big external cabinet nearly the size of a modern mini tower pc.

If your PC had twin floppies you could type a command something like "copy a: b:" to copy the contents of drive A: to drive B:

But then that was all back in a time when Bill Gates was worth about $10,000!

Solution 5:

Its because A and B used to be floppy drives back in the days when floppy drives were the norm and there were no hard-disks. The letter C was given to any hard disk that the user installed. The drives A and B have since then been reserved for floppy drives. This has nothing to do with programming languages.