How do i mount a Raid disk in linux

Solution 1:

Your RAID devices are called /dev/md1 and /dev/md2. It's possible that these contain your filesystems; you could try:

mount /dev/md1 /mnt

Or:

mount /dev/md2 /mnt

Depending on how your system is configured it is also possible that these devices are themselves part of a larger virtual device. If you're unable to mount the individual devices, let us know and we'll work from there.

For more information about Linux software RAID, start with this document.

Solution 2:

I recently found a way to complete this and it's not too complicated.

I found this article, which helped out considerably. https://ahelpme.com/linux/recovering-md-array-and-mdadm-cannot-get-array-info-for-dev-md0/

I ran these commands and had success.

sudo mdadm --assemble --scan --verbose

sudo cat /proc/mdstat

once you figure out which disk you want to mount...

mount /dev/md# /mnt/point