How to recover data from Apple raid 0 drives from dead xserve?

Yesterday, I was given two 160GB hard drives that used to form a striped RAID in an Apple xserve. The xserve is completely non-functional, but the issue is unrelated to the hard drives and I don't think either drive is corrupted. There are no plans to purchase another xserve or other apple server equipment.

So, how can I get the data off? So far, I used a SATA to USB tool combined with Mac Disk Utility to make an image of each drive. The images will verify and attach, but won't mount. The attached images show that disk utility found a striped raid and shows the two raid slices including that the other raid slice is missing. But if I attach both, a third disk magically attaches in Disk Utility with the name of the raid showing. But I cannot find anyway to mount this third disk either.

So I can get the data from these drives? Preferably in a way that uses the disk images I created so I don't mess up anything on the real drives.

Any solutions or ideas are greatly appreciated. Many thanks in advance!

Solution 1:

If you have the disk images (or want to use the actual disks), try using Prosoft Data Rescue to piece things together. They have a guide that outlines the process.

I hate the fact that these are striped disks, but since you get a third disk that appears, see if you can modify it in Disk Utility, or even with a third-party tool like Disk Warrior or the Data Rescue mentioned above.

If all else fails, any reputable data recovery firm will have the requisite tools to help recover the data.