Why is the probe method needed in Linux device drivers in addition to init?

In the linux kernel, what does the probe() method, that the driver provides, do? How different is it from the driver's init function, i.e. why can't the probe() functions actions be performed in the driver's init function ?

Solution 1:

Different device types can have probe() functions. For example, PCI and USB devices both have probe() functions.

If you're talking about PCI devices, I would recommend you read chapter 12 of Linux Device Drivers, which covers this part of driver initialization. USB is covered in chapter 13.

Shorter answer, assuming PCI: The driver's init function calls pci_register_driver() which gives the kernel a list of devices it is able to service, along with a pointer to the probe() function. The kernel then calls the driver's probe() function once for each device.

This probe function starts the per-device initialization: initializing hardware, allocating resources, and registering the device with the kernel as a block or network device or whatever it is.

That makes it easier for device drivers, because they never need to search for devices or worry about finding a device that was hot-plugged. The kernel handles that part and notifies the right driver when it has a device for you to handle.

Solution 2:

@Bandicoot : probe() will be called to make sure that the device exist and the functionality is fine.If device is not hot-pluggable, functionality of probe() can be put inside init() method.This will reduce driver's run time memory footprint. P.S link

Probe() happens at the time of device boot or when device is connected.For a "platform" device the probe function is invoked when a platform device is registered and it's device name matches the name specified on the device driver. P.S link

The i2c_detect function probes the I2C adapter, looking for the different addresses specified in the addr_data structure. If a device is found, the chip_detect function then is called. P.S link.

One link that will surely clear your doubt. P.S link

In kernel 2.4.29, i can show you that how does probe happen ? Please see below (File name: drivers/acorn/char/pcf8583.c)

static struct i2c_driver pcf8583_driver = {
name:       "PCF8583",
id:     I2C_DRIVERID_PCF8583,
flags:      I2C_DF_NOTIFY,
attach_adapter: pcf8583_probe, /* This will be called from i2c-core.c P.S see below function i2c_add_driver()*/
detach_client:  pcf8583_detach,
command:    pcf8583_command

};

File Name: drivers/i2c/i2c-core.c

int i2c_add_driver(struct i2c_driver *driver)
{
    ........................
    ........................

    /* now look for instances of driver on our adapters
     */
    if (driver->flags& (I2C_DF_NOTIFY|I2C_DF_DUMMY)) {
        for (i=0;i<I2C_ADAP_MAX;i++)
            if (adapters[i]!=NULL)
                /* Ignore errors */
                driver->attach_adapter(adapters[i]); /*This is a location from where probe is called. Pointer **driver** is of type **pcf8583_driver** which you have passed into this function*/
    }
    ADAP_UNLOCK();
    return 0;
}

Few important links:

1) http://www.slideshare.net/varunmahajan06/i2c-subsystem-in-linux2624

2) http://www.programering.com/a/MjNwcTMwATM.html

3) http://www.linuxjournal.com/article/6717

4) http://www.developermemo.com/2943157/

5) http://free-electrons.com/doc/kernel-architecture.pdf

6) http://www.techques.com/question/1-3014627/Probe-problem-when-writing-a-I2C-device-driver

In PCI for kernel-2.4.29, it gets called when vendor and device id are identified. PCI bus driver do this for you. Please see below code:

File Name: drivers/pci/pci.c

static int pci_announce_device(struct pci_driver *drv, struct pci_dev *dev)
{
   const struct pci_device_id *id;
   int ret = 0;
   if (drv->id_table) {
    id = pci_match_device(drv->id_table, dev); /* check for device presence*/
    if (!id) {
     ret = 0;
     goto out;
    }
   } else
  id = NULL;
  dev_probe_lock();
  if (drv->probe(dev, id) >= 0) { /* This is a location from where probe is called*/
   dev->driver = drv;
   ret = 1;
   }
   dev_probe_unlock();
  out:
  return ret;
}

Solution 3:

Init(void) // runs once when the driver/module is invoked and sets things up for the kernel driver machine.

Probe(*pdev) // is used by the kernel driver machine as needed to detect and install actual devices