Junos: find out each interface's ip

Sorry if my explanation is confusing. I need to get all the ip addresses of a Juniper Switch and Router (different models). On Cisco IOS I can get that with show ip interface brief | exclude unassigned:

cisco_device>show ip interface brief | exclude unassigned
Interface               IP-Address     OK? Method Status     Protocol
TenGigabitEthernet1/30  10.1.1.24      YES NVRAM  up         up      
Loopback0               10.1.95.2      YES NVRAM  up         up      
Port-channel15          10.1.1.150     YES NVRAM  up         up      
Port-channel39          10.2.1.4       YES NVRAM  up         up      
Port-channel100         10.3.1.2       YES NVRAM  up         up      
Vlan49                  10.4.1.40      YES NVRAM  up         up      

Is there something similar on Junos? Thanks!


You probably want show interfaces:

> show interfaces terse

If you want to exclude interfaces without an IP you can match on inet:

> show interfaces terse | match inet