Is there a way to make drawRect work right NOW?

Solution 1:

If I understand your question correctly, there is a simple solution to this. During your long-running routine you need to tell the current runloop to process for a single iteration (or more, of the runloop) at certain points in your own processing. e.g, when you want to update the display. Any views with dirty update regions will have their drawRect: methods called when you run the runloop.

To tell the current runloop to process for one iteration (and then return to you...):

[[NSRunLoop currentRunLoop] runMode: NSDefaultRunLoopMode beforeDate: [NSDate date]];

Here's an example of an (inefficient) long running routine with a corresponding drawRect - each in the context of a custom UIView:

- (void) longRunningRoutine:(id)sender
{
    srand( time( NULL ) );

    CGFloat x = 0;
    CGFloat y = 0;

    [_path moveToPoint: CGPointMake(0, 0)];

    for ( int j = 0 ; j < 1000 ; j++ )
    {
        x = 0;
        y = (CGFloat)(rand() % (int)self.bounds.size.height);

        [_path addLineToPoint: CGPointMake( x, y)];

        y = 0;
        x = (CGFloat)(rand() % (int)self.bounds.size.width);

        [_path addLineToPoint: CGPointMake( x, y)];

        x = self.bounds.size.width;
        y = (CGFloat)(rand() % (int)self.bounds.size.height);

        [_path addLineToPoint: CGPointMake( x, y)];

        y = self.bounds.size.height;
        x = (CGFloat)(rand() % (int)self.bounds.size.width);

        [_path addLineToPoint: CGPointMake( x, y)];

        [self setNeedsDisplay];
        [[NSRunLoop currentRunLoop] runMode: NSDefaultRunLoopMode beforeDate: [NSDate date]];
    }

    [_path removeAllPoints];
}

- (void) drawRect:(CGRect)rect
{
    CGContextRef ctx = UIGraphicsGetCurrentContext();

    CGContextSetFillColorWithColor( ctx, [UIColor blueColor].CGColor );

    CGContextFillRect( ctx,  rect);

    CGContextSetStrokeColorWithColor( ctx, [UIColor whiteColor].CGColor );

    [_path stroke];
}

And here is a fully working sample demonstrating this technique.

With some tweaking you can probably adjust this to make the rest of the UI (i.e. user-input) responsive as well.

Update (caveat for using this technique)

I just want to say that I agree with much of the feedback from others here saying this solution (calling runMode: to force a call to drawRect:) isn't necessarily a great idea. I've answered this question with what I feel is a factual "here's how" answer to the stated question, and I am not intending to promote this as "correct" architecture. Also, I'm not saying there might not be other (better?) ways to achieve the same effect - certainly there may be other approaches that I wasn't aware of.

Update (response to the Joe's sample code and performance question)

The performance slowdown you're seeing is the overhead of running the runloop on each iteration of your drawing code, which includes rendering the layer to the screen as well as all of the other processing the runloop does such as input gathering and processing.

One option might be to invoke the runloop less frequently.

Another option might be to optimize your drawing code. As it stands (and I don't know if this is your actual app, or just your sample...) there are a handful of things you could do to make it faster. The first thing I would do is move all the UIGraphicsGet/Save/Restore code outside the loop.

From an architectural standpoint however, I would highly recommend considering some of the other approaches mentioned here. I see no reason why you can't structure your drawing to happen on a background thread (algorithm unchanged), and use a timer or other mechanism to signal the main thread to update it's UI on some frequency until the drawing is complete. I think most of the folks who've participated in the discussion would agree that this would be the "correct" approach.

Solution 2:

Updates to the user interface happen at the end of the current pass through the run loop. These updates are performed on the main thread, so anything that runs for a long time in the main thread (lengthy calculations, etc.) will prevent the interface updates from being started. Additionally, anything that runs for a while on the main thread will also cause your touch handling to be unresponsive.

This means that there is no way to "force" a UI refresh to occur from some other point in a process running on the main thread. The previous statement is not entirely correct, as Tom's answer shows. You can allow the run loop to come to completion in the middle of operations performed on the main thread. However, this still may reduce the responsiveness of your application.

In general, it is recommended that you move anything that takes a while to perform to a background thread so that the user interface can remain responsive. However, any updates you wish to perform to the UI need to be done back on the main thread.

Perhaps the easiest way to do this under Snow Leopard and iOS 4.0+ is to use blocks, like in the following rudimentary sample:

dispatch_queue_t main_queue = dispatch_get_main_queue();
dispatch_async(queue, ^{
    // Do some work
    dispatch_async(main_queue, ^{
        // Update the UI
    });
});

The Do some work part of the above could be a lengthy calculation, or an operation that loops over multiple values. In this example, the UI is only updated at the end of the operation, but if you wanted continuous progress tracking in your UI, you could place the dispatch to the main queue where ever you needed a UI update to be performed.

For older OS versions, you can break off a background thread manually or through an NSOperation. For manual background threading, you can use

[NSThread detachNewThreadSelector:@selector(doWork) toTarget:self withObject:nil];

or

[self performSelectorInBackground:@selector(doWork) withObject:nil];

and then to update the UI you can use

[self performSelectorOnMainThread:@selector(updateProgress) withObject:nil waitUntilDone:NO];

Note that I've found the NO argument in the previous method to be needed to get constant UI updates while dealing with a continuous progress bar.

This sample application I created for my class illustrates how to use both NSOperations and queues for performing background work and then updating the UI when done. Also, my Molecules application uses background threads for processing new structures, with a status bar that is updated as this progresses. You can download the source code to see how I achieved this.

Solution 3:

You can do this repeatedly in a loop and it'll work fine, no threads, no messing with the runloop, etc.

[CATransaction begin];
// modify view or views
[view setNeedsDisplay];
[CATransaction commit];

If there is an implicit transaction already in place prior to the loop you need to commit that with [CATransaction commit] before this will work.