Which methods help to improve wireless signal?

My router is in my family room, and there's not much I can do to move it, it's in the corner of the house. My room and computer is upstairs and I only get a signal strength of about 17 percent while the one down the hall gets 65 percent.

I'm wondering if it's due to my cheap airlink card and if I should invest in a Linksys one for 10 bucks. I also want to mention that my router is running DD-WRT and is a wireless g router while the card I have in this computer is a wireless N card.


You could boost your signal. Typically the power is set at 28 milli watt(mW). In order to boost signal you will have to install 3rd party firmware. I have had 3rd party firmware on my router for years and have boosted my signal to 200 mW with out any problems. It should be noted that with increased power comes higer temeretures that may negativily impact the lifetime of other components in the router. I have just started using dd-wrt as a firmware provider and they seem to do the job nicely - and it's free.
http://www.dd-wrt.com/dd-wrtv3/index.php


The cheapest solution - often works miracles:

Boost Your Wireless Signal With a Parabolic Reflector

alt text


I recommend getting either one of three things:

  1. wireless N base station - N has a better base range

  2. wireless range extender - I have one of these and it works quite well.

  3. a second router with DD-WRT and set up WDS


I recently hugely improved the wireless signal to all parts of my house by putting the router on a shelf by itself, further away from the wall than it had previously been, and free of encroachment from books and piles of clutter which had been accumulating around it. Not sure about the percentage change, but it was enough to make streamed video work in places which couldn't even sustain a stable connection before.


You might want to try a "windsurfer"

http://www.youtube.com/watch?v=YwW26jNWAQE

as a cheap first way to improve your coverage. I think the easiest way I can describe the shape of wifi coverage is as a squashed sphere with the widest part perpendicular to your antenna and the narrowest part along the length of the antenna.