Ubuntu 14.04 screen resolution too low (SiS 671 graphics card)

I just installed Ubuntu 14.04 but my screen resolution is set too low: I tried to add a new one but i keep getting

xrandr: Failed to get size of gamma for output default

I tried :

$ xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 640 x 480, maximum 640 x 480
default connected primary 640x480+0+0 0mm x 0mm
   640x480        73.0* 
  1024x768_60.00 (0x194)   63.5MHz
        h: width  1024 start 1072 end 1176 total 1328 skew    0 clock   47.8KHz
        v: height  768 start  771 end  775 total  798           clock   59.9Hz

(I didn't have this problem on Ubuntu 13.10 13.04 12.04)

$ xrandr --newmode "1024x768_60.00"   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync
xrandr: Failed to get size of gamma for output default

$ lspci | grep VGA
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)

============================================================================ I did an update yesterday on my Ubuntu 12.04 and it ruined my screen resolution due to something about 1204_HWE_EOL

I'm back to Ubuntu 14.04 and the only way to get a nice screen resolution is to start from the recovery menu then resume boot.

I was having the same issue with the resolution. I'm using VirtualBox and the resolution only had one resolution option.

1. I went to the search bar and searched for Additional drivers
2. Next, I clicked on using x86 virtualization solution - guest addition module source for dkms
3. Finally, I restarted the virtual machine running Ubuntu.

As soon as it booted back up the resolution was already fixed.

Create/edit /etc/X11/xorg.conf:

Section "Device"
  Identifier "Generic Video Card"
    VendorName  "Silicon Integrated Systems [SiS]"
        BoardName   "771/671 PCIE VGA Display Adapter"
    Busid "PCI:1:0:0"
    Driver "vesa"
    Screen 0
        Option "UseFBDev" "true"
        Option "DPMS"
        Option "ShadowFB"
        Option "MaxXFBMem"
        VideoRam 262016
        Option "RenderAccel" "true"
        Option "AllowGLXWithComposite" "true"
        Option "backingstore" "true"
        Option "AddARGBGLXVisuals" "True"

EndSection

Section "Monitor"
    Identifier    "Configured Monitor"
    Vendorname    "Generic LCD Display"
    Modelname    "LCD Panel 1280x800"
    HorizSync 20-107
        VertRefresh 50-185
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1280x768@60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
  modeline  "1280x720@60" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
  modeline  "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
    Gamma    1.0
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Monitor        "Configured Monitor"
    Device        "Configured Video Device"
    Defaultdepth    24
    SubSection "Display"
        Depth    24
        Virtual    1280    768
        Modes        "1280x768@60"    "1280x720@60"    "800x600@60"    "1280x800@60"    "800x600@56"
    EndSubSection
EndSection

Section "Module"
    Load "dri"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx" # 3D layer
    Load "GLcore"
    Load "i2c"
    Load "bitmap"
    Load "ddc"
    Load "int10"
    Load "vbe"
    Load "speedo"
    Load "record"
EndSection

Section "DRI"
        Mode 0666
EndSection

This worked for me. (Saw on this thread on Ubuntu Forums)