Manually ground the UK wall plug for macbook? [duplicate]

I have a MacBook Pro 4.1. In the past - from time to time - you could feel a bit of electricity close to the aluminium case when working in AC mode, but now things are getting worse. I can feel the electricity all the time, especially close to the opening button and to the corners. Talking with other MBP users, I have been told that the whole MBP 1.4 series has got this problem and that it is due to the presence of the aluminium case. Is it a known issue? Is there any workaround to properly ground the laptop?

Your specific mac only grounds itself through the magsafe connector if you are using a grounded plug. In the US, standard power means the "duck head" two prong connector is ungrounded. (Or unearthed to some) Use a three conductor plug to ground the device and check your MagSafe pins to be sure they extend fully and mate correctly with the Mac.

The adapter article from Apple has some good tips and a nice picture.

You shouldn't be able to feel any tingle due to you being better grounded than the mac if your outlet is properly grounded.

You'll have to check with an electrician or take your mac to another outlet that is known to be properly grounded if you are already grounding it through the wall if you still feel the tingle with a grounded cord.

This sort of ground current drives me nuts (even though it's normally totally safe). I have on occasion intentionally grounded one of the plastic feet with foil when I am waiting for the electrician to fix an outlet or I am working in a location where I can't get a proper ground.

tl;dr

Use the extension cord! It is grounded.

Apple's grounding madness

You need your device to be grounded. The charger can be grounded because the metal pin that holds the adapter is (subtly) also the ground:

You need the plug to be grounded too. Obviously a 2 pin/prong plug is not grounded, you'll need one with 3 of them, but even in this case you have to check if the adapter's socket/shoe has metal in it (AKA is connected to the ground), because you can't take that granted at Apple! Just check out this picture from this article:

This is a 3 prong UK plug that has a grounding prong, but they haven't connected it! Fortunately at the extension cord there is a connection. You have to carry that extra 1.8 meter of cable tho...

So at Apple, the rule of thumb is that if it is an extension cord, then the socket is connected to the ground pin so it is probably grounded, if it is the small adapter, then there is no connection in the socket so no grounding for you:

The left picture from this answer shows the difference. The metal is more visible in the magnified picture on the right.

Hacky solution

Technically you could hack the not grounded 3 prong UK (Type G) adapter (that I mentioned before) to connect the ground prong to the grounding pin as shown in this tutorial. Of course, unless you want to use it with a Type G socket instead of the many other types, you will need to use another (grounded!) adapter to convert it to your desired (grounded!) wall socket.