Second Monitor stays black/in power save mode

I'm using two Monitors, a Belinea o.display 1 (Recognized as a Rogen Tech Distribution Inc 20" by Ubuntu, but working fine) on the DVI-Output (connected via DVI-to-VGA-adapter) as my primary Monitor and a Dell 19" (Recognized correctly) on the HDMI-output (via HDMI-to-DVI adapter) as secondary monitor. The graphics controller is a GeForce 9500 GS. I'm running a fully updated Ubuntu 13.04 with nouveau 1:1.0.7-0ubuntu1.

The problem is that the second monitor (Dell) never seems to come out of standby during boot: the screen stays black and the status led on the monitor stays orange (it's green when it's on). It is correctly recognized an the size of the desktop is set accordingly, it just stays black. Changing any setting via xrandr/arandr/etc. does nothing. The on-screen-menu of the monitor reports it to be in power save mode.

When using the proprietary NVIDIA-Drivers, the second monitor works just find. But these drivers cause a lot of other problems on my system, so i would really like to avoid them.

On Ubuntu 12.10 i had found a workaround: When moving the relative position of the second monitor slightly down and the up again, it would turn on and function normally:

xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x88 --rotate normal
sleep 2
xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x0 --rotate normal

This workaround stop working after the update to 13.04, and now i'm looking for a new solution.

Has anyone experienced something similarity?

xrandr output:

Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192
DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 270mm
   1680x1050      60.0*+
   1280x1024      75.0     60.0  
   1280x960       60.0  
   1152x864       75.0  
   1024x768       75.1     72.0     70.1     60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   640x480        72.8     75.0     66.7     60.0  
   720x400        70.1  
HDMI-1 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 376mm x 301mm
   1280x1024      60.0*+   75.0  
   1152x864       75.0  
   1024x768       75.1     60.0  
   800x600        75.0     60.3  
   640x480        75.0     60.0  
   720x400        70.1  

lshw -c video:

  *-display

       Beschreibung: VGA compatible controller
       Produkt: G96 [GeForce 9500 GS]
       Hersteller: NVIDIA Corporation
       Physische ID: 0
       Bus-Informationen: pci@0000:01:00.0
       Version: a1
       Breite: 64 bits
       Takt: 33MHz
       Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom
       Konfiguration: driver=nouveau latency=0
       Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:df00(Größe=128) memory:fb000000-fb07ffff

Thanks for your help!

Solution 1:

I found a workaround for a similar problem. After boot, or X restart, one of my monitors goes into powersave, the other works fine. If I switch to a text only console (ctrl-alt-f1) the screen will turn on and work correctly. When I switch back to X (ctrl-alt-f7), my display will stay on. I think it is a frequency sync issue.

Solution 2:

I'm having the same problem with Lubuntu 12.04. Your workaround with the pos argument does not work for me. What works for me is calling xrandr twice, with different resolutions:

DISPLAY=:0 xrandr --output HDMI1 --mode 1024x768
DISPLAY=:0 xrandr --output HDMI1 --auto

It's causing some ugly flickering, but does its job. And it saves me two keystrokes compared to Jeffery Williams solution, which also works for me.