Question about terminating a thread cleanly in .NET

Unfortunately there may not be a better option. It really depends on your specific scenario. The idea is to stop the thread gracefully at safe points. That is the crux of the reason why Thread.Abort is not good; because it is not guaranteed to occur at safe points. By sprinkling the code with a stopping mechanism you are effectively manually defining the safe points. This is called cooperative cancellation. There are basically 4 broad mechanisms for doing this. You can choose the one that best fits your situation.

Poll a stopping flag

You have already mentioned this method. This a pretty common one. Make periodic checks of the flag at safe points in your algorithm and bail out when it gets signalled. The standard approach is to mark the variable volatile. If that is not possible or inconvenient then you can use a lock. Remember, you cannot mark a local variable as volatile so if a lambda expression captures it through a closure, for example, then you would have to resort to a different method for creating the memory barrier that is required. There is not a whole lot else that needs to be said for this method.

Use the new cancellation mechanisms in the TPL

This is similar to polling a stopping flag except that it uses the new cancellation data structures in the TPL. It is still based on cooperative cancellation patterns. You need to get a CancellationToken and the periodically check IsCancellationRequested. To request cancellation you would call Cancel on the CancellationTokenSource that originally provided the token. There is a lot you can do with the new cancellation mechanisms. You can read more about here.

Use wait handles

This method can be useful if your worker thread requires waiting on an specific interval or for a signal during its normal operation. You can Set a ManualResetEvent, for example, to let the thread know it is time to stop. You can test the event using the WaitOne function which returns a bool indicating whether the event was signalled. The WaitOne takes a parameter that specifies how much time to wait for the call to return if the event was not signaled in that amount of time. You can use this technique in place of Thread.Sleep and get the stopping indication at the same time. It is also useful if there are other WaitHandle instances that the thread may have to wait on. You can call WaitHandle.WaitAny to wait on any event (including the stop event) all in one call. Using an event can be better than calling Thread.Interrupt since you have more control over of the flow of the program (Thread.Interrupt throws an exception so you would have to strategically place the try-catch blocks to perform any necessary cleanup).

Specialized scenarios

There are several one-off scenarios that have very specialized stopping mechanisms. It is definitely outside the scope of this answer to enumerate them all (never mind that it would be nearly impossible). A good example of what I mean here is the Socket class. If the thread is blocked on a call to Send or Receive then calling Close will interrupt the socket on whatever blocking call it was in effectively unblocking it. I am sure there are several other areas in the BCL where similiar techniques can be used to unblock a thread.

Interrupt the thread via Thread.Interrupt

The advantage here is that it is simple and you do not have to focus on sprinkling your code with anything really. The disadvantage is that you have little control over where the safe points are in your algorithm. The reason is because Thread.Interrupt works by injecting an exception inside one of the canned BCL blocking calls. These include Thread.Sleep, WaitHandle.WaitOne, Thread.Join, etc. So you have to be wise about where you place them. However, most the time the algorithm dictates where they go and that is usually fine anyway especially if your algorithm spends most of its time in one of these blocking calls. If you algorithm does not use one of the blocking calls in the BCL then this method will not work for you. The theory here is that the ThreadInterruptException is only generated from .NET waiting call so it is likely at a safe point. At the very least you know that the thread cannot be in unmanaged code or bail out of a critical section leaving a dangling lock in an acquired state. Despite this being less invasive than Thread.Abort I still discourage its use because it is not obvious which calls respond to it and many developers will be unfamiliar with its nuances.

Well, unfortunately in multithreading you often have to compromise "snappiness" for cleanliness... you can exit a thread immediately if you Interrupt it, but it won't be very clean. So no, you don't have to sprinkle the _shouldStop checks every 4-5 lines, but if you do interrupt your thread then you should handle the exception and exit out of the loop in a clean manner.

Update

Even if it's not a looping thread (i.e. perhaps it's a thread that performs some long-running asynchronous operation or some type of block for input operation), you can Interrupt it, but you should still catch the ThreadInterruptedException and exit the thread cleanly. I think that the examples you've been reading are very appropriate.

Update 2.0

Yes I have an example... I'll just show you an example based on the link you referenced:

public class InterruptExample
{
    private Thread t;
    private volatile boolean alive;

    public InterruptExample()
    {
        alive = false;

        t = new Thread(()=>
        {
            try
            {
                while (alive)
                {
                    /* Do work. */
                }
            }
            catch (ThreadInterruptedException exception)
            {
                /* Clean up. */
            }
        });
        t.IsBackground = true;
    }

    public void Start()
    {
        alive = true;
        t.Start();
    }


    public void Kill(int timeout = 0)
    {
        // somebody tells you to stop the thread
        t.Interrupt();

        // Optionally you can block the caller
        // by making them wait until the thread exits.
        // If they leave the default timeout, 
        // then they will not wait at all
        t.Join(timeout);
    }
}

If cancellation is a requirement of the thing you're building, then it should be treated with as much respect as the rest of your code--it may be something you have to design for.

Lets assume that your thread is doing one of two things at all times.

Something CPU bound
Waiting for the kernel

If you're CPU bound in the thread in question, you probably have a good spot to insert the bail-out check. If you're calling into someone else's code to do some long-running CPU-bound task, then you might need to fix the external code, move it out of process (aborting threads is evil, but aborting processes is well-defined and safe), etc.

If you're waiting for the kernel, then there's probably a handle (or fd, or mach port, ...) involved in the wait. Usually if you destroy the relevant handle, the kernel will return with some failure code immediately. If you're in .net/java/etc. you'll likely end up with an exception. In C, whatever code you already have in place to handle system call failures will propagate the error up to a meaningful part of your app. Either way, you break out of the low-level place fairly cleanly and in a very timely manner without needing new code sprinkled everywhere.

A tactic I often use with this kind of code is to keep track of a list of handles that need to be closed and then have my abort function set a "cancelled" flag and then close them. When the function fails it can check the flag and report failure due to cancellation rather than due to whatever the specific exception/errno was.

You seem to be implying that an acceptable granularity for cancellation is at the level of a service call. This is probably not good thinking--you are much better off cancelling the background work synchronously and joining the old background thread from the foreground thread. It's way cleaner becasue:

It avoids a class of race conditions when old bgwork threads come back to life after unexpected delays.
It avoids potential hidden thread/memory leaks caused by hanging background processes by making it possible for the effects of a hanging background thread to hide.

There are two reasons to be scared of this approach:

You don't think you can abort your own code in a timely fashion. If cancellation is a requirement of your app, the decision you really need to make is a resource/business decision: do a hack, or fix your problem cleanly.
You don't trust some code you're calling because it's out of your control. If you really don't trust it, consider moving it out-of-process. You get much better isolation from many kinds of risks, including this one, that way.

The best answer largely depends on what you're doing in the thread.

Like you said, most answers revolve around polling a shared boolean every couple lines. Even though you may not like it, this is often the simplest scheme. If you want to make your life easier, you can write a method like ThrowIfCancelled(), which throws some kind of exception if you're done. The purists will say this is (gasp) using exceptions for control flow, but then again cacelling is exceptional imo.
If you're doing IO operations (like network stuff), you may want to consider doing everything using async operations.
If you're doing a sequence of steps, you could use the IEnumerable trick to make a state machine. Example:

abstract class StateMachine : IDisposable
{
    public abstract IEnumerable<object> Main();

    public virtual void Dispose()
    {
        /// ... override with free-ing code ...
   }

   bool wasCancelled;

   public bool Cancel()
   {
     // ... set wasCancelled using locking scheme of choice ...
    }

   public Thread Run()
   {
       var thread = new Thread(() =>
           {
              try
              {
                if(wasCancelled) return;
                foreach(var x in Main())
                {
                    if(wasCancelled) return;
                }
              }
              finally { Dispose(); }
           });
       thread.Start()
   }
}

class MyStateMachine : StateMachine
{
   public override IEnumerabl<object> Main()
   {
       DoSomething();
       yield return null;
       DoSomethingElse();
       yield return null;
   }
}

// then call new MyStateMachine().Run() to run.

Overengineering? It depends how many state machines you use. If you just have 1, yes. If you have 100, then maybe not. Too tricky? Well, it depends. Another bonus of this approach is that it lets you (with minor modifications) move your operation into a Timer.tick callback and void threading altogether if it makes sense.

and do everything that blucz says too.

Question about terminating a thread cleanly in .NET

Update

Update 2.0

Related

Recent Posts