iPhone 4 Camera Specifications - Field of View / Vertical-Horizontal Angle

Solution 1:

If the sensor is 3.39 mm tall (referenced to landscape mode), then half that is 1.695 mm. Focal length for the iPhone 4 is listed as 3.85 mm. atan(1.695/3.85) is 23.75 degrees from center to top, or 47.5 degrees top to bottom.

For the longer dimension 4.52/2 = 2.26 mm, atan(2.26/3.85) = 30.41 center to side, or 60.8 degrees left to right (again referencing with respect to landscape orientation).

So 60.8 degrees horizontal by 47.5 degrees vertical.

ADDED much later:

The focal length for the newer iPhone 4S back camera is listed as 4.28 mm, but with the same sensor dimensions as the older iPhone 4. So:

2*atan(2.26/4.28) = 55.7 degrees, by 2*atan(1.695/4.28) = 43.2 degrees

or roughly a 4 to 5 degree smaller field-of-view compared with the iPhone 4.

ADDED much much later:

The sensor size for the iPhone 5S back camera is reported to be 4.89 x 3.67 mm, with a focal length of 4.12 mm. Thus:

2*atan((4.89/2)/4.12) = 61.4 degrees wide

2*atan((3.67/2)/4.12) = 48.0 degrees top to bottom

...or an FOV just a smidge larger than the back camera the iPhone 4.

Solution 2:

I think iOS7 has introduced a new property videoFieldOfView for AVCaptureDeviceFormat so we can use this property to get the FOV, field of view like:

NSLog(@"Camera's FOV is %f",myCamera.activeFormat.videoFieldOfView);

where myCamera is an instance of AVCaptureDevice. Here you will get an overview on focal length, angle of view and field of view.

Solution 3:

Seems there is a little mistake in previous calculations OV8830-G04A sensor has dimensions 4592x3450 um

Then correct angles are:

2*atan(4.592/(2*4.28))*180/pi = 56.423

2*atan(3.450/(2*4.28))*180/pi = 43.903

It becomes very crucial in sensitive applications.