Cant resolve hostnames except using nslookup/dig in CentOS [resolved]
I am unable to resolve hostnames, except using dig/nslookup. Declaring hosts in /etc/hosts works fine. DNSmasq nor bind is running. Below is the output of tcpdump port 53 when running dig google.com:
21:02:49.269083 IP txxxxxx1.corp.mxxxxxxs.com.39872 > dxxxxxx3.corp.mxxxxxs.com.domain: 7362+ A? google.com. (28)
21:02:49.269614 IP dxxxxxx3.corp.mxxxxxxs.com.domain > txxxxxx1.corp.mxxxxxxs.com.39872: 7362 5/0/0 A ord08s07-in-f19.1e100.net,[|domain]
21:02:49.270506 IP txxxxxx1.corp.mxxxxxxs.com.33316 > dxxxxxx3.corp.mxxxxxxs.com.domain: 30910+ PTR? 83.225.125.74.in-addr.arpa. (44)
21:02:49.303321 IP dxxxxxx3.corp.mxxxxxxs.com.domain > txxxxxx1.corp.mxxxxxxs.com.33316: 30910*- 1/0/0 (83)
And the results while running ping google.com:
21:03:05.027197 IP txxxxxx1.corp.mxxxxxxs.com.59151 > dxxxxxx3.corp.mxxxxxxs.com.domain: 56092+ A? google.com. (28)
21:03:05.029069 IP dxxxxxx3.corp.mxxxxxxs.com.domain > txxxxxx1.corp.mxxxxxxs.com.59151: 56092 5/0/0 A ord08s07-in-f18.1e100.net,[|domain]
21:03:05.029309 IP txxxxxx1.corp.mxxxxxxs.com.58238 > dxxxxxx3.corp.mxxxxxxs.com.domain: 10345+ PTR? 82.225.125.74.in-addr.arpa. (44)
21:03:05.065058 IP dxxxxxx3.corp.mxxxxxxs.com.domain > txxxxxx1.corp.mxxxxxxs.com.58238: 10345*- 1/0/0 (83)
Ping does not return any packets when used with hostnames. The results above are delayed ~5 seconds from when the command is given. I have no trouble pinging IPs.
Contents of /etc/resolv.conf:
nameserver 10.100.52.11
nameserver 10.100.52.13
Both name servers give good results when used with dig.
Results of route -n:
Destination Gateway Genmask Flags Metric Ref Use Iface
10.xxx.131.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.xxx.131.1 0.0.0.0 UG 0 0 0 eth0
Contents of /etc/hosts:
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
10.xxx.131.xxx txxxxxx1.corp.mxxxxxxs.com ast01
10.xxx.32.xxx mail.mxxxxxxs.com
SSHD does not even allow logins if UseDNS is set to yes. NSCD is running: nscd 28525 0.0 0.0 233652 2900 ? Ssl 20:10 0:00 /usr/sbin/nscd.
Thanks!
. . . EDIT
I resolved this. /etc/nsswitch.conf had the line:
hosts: files wins dns
I changed it to read:
hosts: dns files wins
and everything works now. What's bizarre is that things were working fine up until last week. Nothing changed, certainly not as far as DNS. Hope this helps someone.
Solution 1:
Are you relying on hostname completion (or "dns suffix appending" in the Windows world) to get a Fully Qualified Domain Name when you're running ping? If so, your /etc/resolv.conf is missing the domain and/or search options.
nameserver 10.100.52.11
nameserver 10.100.52.13
domain corp.mxxxxxxs.com
This should automatically append corp.mxxxxxxs.com to $HOST so you have a FQDN that correctly resolves.
See the manpage for more details.