How can I mount a disk image?

I have a disk image myimage.disk which contains the partition table and a primary partition (i.e. a FAT32 filesystem). Think that as a USB pen image.

I want to mount the primary partition to a local directory. I know how to mount a partition image using the loop utils but here I have disk image. My guess is that I have to mount the image "skipping" the partition table but how can I do that?

The kpartx tool makes this easier. It creates loop devices in /dev/mapper for each partition in your image. Then you can mount the loop device that corresponds with your desired partition without having to calculate the offset manually.

For example, to mount the first partition of the disk image:

kpartx -a -v myimage.disk
mount /dev/mapper/loop0p1 /mnt/myimage

When you're done with the image, remove the loop devices:

umount /mnt/myimage
kpartx -d -v myimage.disk

Alternatively, if you have a recent kernel, and pass loop.max_part=63 on boot (if loop is built-in) or to modprobe (if loop is a module), then you can do it this way:

losetup /dev/loop0 myimage.disk
partprobe /dev/loop0             # Re-read partition table if /dev/loop0 was used with a different image before
mount /dev/loop0p1 /mnt/myimage

When you're done with the loop:

losetup -d /dev/loop0

Found this:

http://www.andremiller.net/content/mounting-hard-disk-image-including-partitions-using-linux

which seems exactly what I was looking for.

Here's the key part:

mount -o loop,ro,offset=32256 hda.img /mnt/rabbit

where the value of offset is in bytes. The suggested way to get the offset is to point parted at the image, then unit B for bytes and take the start value from the print output. As an alternative, assuming you have the disk space, do the obvious: once you have the offset and size, just use dd to extract each partition to a separate file.