How to remove the strap from the Joy-Con strap?

I'm surprised nobody has done a teardown video of the strap accessory yet, but you can in fact disassemble it and remove the strap. I don't have pictures, but here's the process.

WARNING: Performing these steps may void your warranty. There are several tiny pieces that may be lost or damaged during this process. Also, the white locking tab may be a looser than normal without the strap in place.

1. Remove the 3 screws on the inside of the metal track.
2. Lift the metal track out of the plastic housing. Watch out for the little black bar with the locking pins on it as it will likely fall out.
3. Carefully remove the spring that is under the locking pin bar.
4. Lift out the black plastic cover that runs the length of the interior by lifting up on the end opposite the strap. The white locking tab is slotted into this piece, and if you try and force it out from the strap end you will likely break the tab.
5. You should see the strap's end now. Both ends come to meet in a metal crimp. You can lift this up and remove the strap as well as the white locking tab.
6. Reassemble by reversing the steps.