Using Javascript's atob to decode base64 doesn't properly decode utf-8 strings
The Unicode Problem
Though JavaScript (ECMAScript) has matured, the fragility of Base64, ASCII, and Unicode encoding has caused a lot of headache (much of it is in this question's history).
Consider the following example:
const ok = "a";
console.log(ok.codePointAt(0).toString(16)); // 61: occupies < 1 byte
const notOK = "✓"
console.log(notOK.codePointAt(0).toString(16)); // 2713: occupies > 1 byte
console.log(btoa(ok)); // YQ==
console.log(btoa(notOK)); // error
Why do we encounter this?
Base64, by design, expects binary data as its input. In terms of JavaScript strings, this means strings in which each character occupies only one byte. So if you pass a string into btoa() containing characters that occupy more than one byte, you will get an error, because this is not considered binary data.
Source: MDN (2021)
The original MDN article also covered the broken nature of window.btoa and .atob, which have since been mended in modern ECMAScript. The original, now-dead MDN article explained:
The "Unicode Problem" Since
DOMStrings are 16-bit-encoded strings, in most browsers callingwindow.btoaon a Unicode string will cause aCharacter Out Of Range exceptionif a character exceeds the range of a 8-bit byte (0x00~0xFF).
Solution with binary interoperability
(Keep scrolling for the ASCII base64 solution)
Source: MDN (2021)
The solution recommended by MDN is to actually encode to and from a binary string representation:
Encoding UTF8 ⇢ binary
// convert a Unicode string to a string in which
// each 16-bit unit occupies only one byte
function toBinary(string) {
const codeUnits = new Uint16Array(string.length);
for (let i = 0; i < codeUnits.length; i++) {
codeUnits[i] = string.charCodeAt(i);
}
return btoa(String.fromCharCode(...new Uint8Array(codeUnits.buffer)));
}
// a string that contains characters occupying > 1 byte
let encoded = toBinary("✓ à la mode") // "EycgAOAAIABsAGEAIABtAG8AZABlAA=="
Decoding binary ⇢ UTF-8
function fromBinary(encoded) {
binary = atob(encoded)
const bytes = new Uint8Array(binary.length);
for (let i = 0; i < bytes.length; i++) {
bytes[i] = binary.charCodeAt(i);
}
return String.fromCharCode(...new Uint16Array(bytes.buffer));
}
// our previous Base64-encoded string
let decoded = fromBinary(encoded) // "✓ à la mode"
Where this fails a little, is that you'll notice the encoded string EycgAOAAIABsAGEAIABtAG8AZABlAA== no longer matches the previous solution's string 4pyTIMOgIGxhIG1vZGU=. This is because it is a binary encoded string, not a UTF-8 encoded string. If this doesn't matter to you (i.e., you aren't converting strings represented in UTF-8 from another system), then you're good to go. If, however, you want to preserve the UTF-8 functionality, you're better off using the solution described below.
Solution with ASCII base64 interoperability
The entire history of this question shows just how many different ways we've had to work around broken encoding systems over the years. Though the original MDN article no longer exists, this solution is still arguably a better one, and does a great job of solving "The Unicode Problem" while maintaining plain text base64 strings that you can decode on, say, base64decode.org.
There are two possible methods to solve this problem:
- the first one is to escape the whole string (with UTF-8, see
encodeURIComponent) and then encode it;- the second one is to convert the UTF-16
DOMStringto an UTF-8 array of characters and then encode it.
A note on previous solutions: the MDN article originally suggested using unescape and escape to solve the Character Out Of Range exception problem, but they have since been deprecated. Some other answers here have suggested working around this with decodeURIComponent and encodeURIComponent, this has proven to be unreliable and unpredictable. The most recent update to this answer uses modern JavaScript functions to improve speed and modernize code.
If you're trying to save yourself some time, you could also consider using a library:
- js-base64 (NPM, great for Node.js)
- base64-js
Encoding UTF8 ⇢ base64
function b64EncodeUnicode(str) {
// first we use encodeURIComponent to get percent-encoded UTF-8,
// then we convert the percent encodings into raw bytes which
// can be fed into btoa.
return btoa(encodeURIComponent(str).replace(/%([0-9A-F]{2})/g,
function toSolidBytes(match, p1) {
return String.fromCharCode('0x' + p1);
}));
}
b64EncodeUnicode('✓ à la mode'); // "4pyTIMOgIGxhIG1vZGU="
b64EncodeUnicode('\n'); // "Cg=="
Decoding base64 ⇢ UTF8
function b64DecodeUnicode(str) {
// Going backwards: from bytestream, to percent-encoding, to original string.
return decodeURIComponent(atob(str).split('').map(function(c) {
return '%' + ('00' + c.charCodeAt(0).toString(16)).slice(-2);
}).join(''));
}
b64DecodeUnicode('4pyTIMOgIGxhIG1vZGU='); // "✓ à la mode"
b64DecodeUnicode('Cg=='); // "\n"
(Why do we need to do this? ('00' + c.charCodeAt(0).toString(16)).slice(-2) prepends a 0 to single character strings, for example when c == \n, the c.charCodeAt(0).toString(16) returns a, forcing a to be represented as 0a).
TypeScript support
Here's same solution with some additional TypeScript compatibility (via @MA-Maddin):
// Encoding UTF8 ⇢ base64
function b64EncodeUnicode(str) {
return btoa(encodeURIComponent(str).replace(/%([0-9A-F]{2})/g, function(match, p1) {
return String.fromCharCode(parseInt(p1, 16))
}))
}
// Decoding base64 ⇢ UTF8
function b64DecodeUnicode(str) {
return decodeURIComponent(Array.prototype.map.call(atob(str), function(c) {
return '%' + ('00' + c.charCodeAt(0).toString(16)).slice(-2)
}).join(''))
}
The first solution (deprecated)
This used escape and unescape (which are now deprecated, though this still works in all modern browsers):
function utf8_to_b64( str ) {
return window.btoa(unescape(encodeURIComponent( str )));
}
function b64_to_utf8( str ) {
return decodeURIComponent(escape(window.atob( str )));
}
// Usage:
utf8_to_b64('✓ à la mode'); // "4pyTIMOgIGxhIG1vZGU="
b64_to_utf8('4pyTIMOgIGxhIG1vZGU='); // "✓ à la mode"
And one last thing: I first encountered this problem when calling the GitHub API. To get this to work on (Mobile) Safari properly, I actually had to strip all white space from the base64 source before I could even decode the source. Whether or not this is still relevant in 2021, I don't know:
function b64_to_utf8( str ) {
str = str.replace(/\s/g, '');
return decodeURIComponent(escape(window.atob( str )));
}
Things change. The escape/unescape methods have been deprecated.
You can URI encode the string before you Base64-encode it. Note that this does't produce Base64-encoded UTF8, but rather Base64-encoded URL-encoded data. Both sides must agree on the same encoding.
See working example here: http://codepen.io/anon/pen/PZgbPW
// encode string
var base64 = window.btoa(encodeURIComponent('€ 你好 æøåÆØÅ'));
// decode string
var str = decodeURIComponent(window.atob(tmp));
// str is now === '€ 你好 æøåÆØÅ'
For OP's problem a third party library such as js-base64 should solve the problem.
If treating strings as bytes is more your thing, you can use the following functions
function u_atob(ascii) {
return Uint8Array.from(atob(ascii), c => c.charCodeAt(0));
}
function u_btoa(buffer) {
var binary = [];
var bytes = new Uint8Array(buffer);
for (var i = 0, il = bytes.byteLength; i < il; i++) {
binary.push(String.fromCharCode(bytes[i]));
}
return btoa(binary.join(''));
}
// example, it works also with astral plane characters such as '𝒞'
var encodedString = new TextEncoder().encode('✓');
var base64String = u_btoa(encodedString);
console.log('✓' === new TextDecoder().decode(u_atob(base64String)))
The complete article that works for me: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Base64_encoding_and_decoding
The part where we encode from Unicode/UTF-8 is
function utf8_to_b64( str ) {
return window.btoa(unescape(encodeURIComponent( str )));
}
function b64_to_utf8( str ) {
return decodeURIComponent(escape(window.atob( str )));
}
// Usage:
utf8_to_b64('✓ à la mode'); // "4pyTIMOgIGxhIG1vZGU="
b64_to_utf8('4pyTIMOgIGxhIG1vZGU='); // "✓ à la mode"
This is one of the most used methods nowadays.