How to create range in Swift?

In Objective-c we create range by using NSRange

NSRange range;

So how to create range in Swift?

Solution 1:

Updated for Swift 4

Swift ranges are more complex than NSRange, and they didn't get any easier in Swift 3. If you want to try to understand the reasoning behind some of this complexity, read this and this. I'll just show you how to create them and when you might use them.

Closed Ranges: `a...b`

This range operator creates a Swift range which includes both element a and element b, even if b is the maximum possible value for a type (like Int.max). There are two different types of closed ranges: ClosedRange and CountableClosedRange.

1. `ClosedRange`

The elements of all ranges in Swift are comparable (ie, they conform to the Comparable protocol). That allows you to access the elements in the range from a collection. Here is an example:

let myRange: ClosedRange = 1...3

let myArray = ["a", "b", "c", "d", "e"]
myArray[myRange] // ["b", "c", "d"]

However, a ClosedRange is not countable (ie, it does not conform to the Sequence protocol). That means you can't iterate over the elements with a for loop. For that you need the CountableClosedRange.

2. `CountableClosedRange`

This is similar to the last one except now the range can also be iterated over.

let myRange: CountableClosedRange = 1...3

let myArray = ["a", "b", "c", "d", "e"]
myArray[myRange] // ["b", "c", "d"]

for index in myRange {
    print(myArray[index])
}

Half-Open Ranges: `a..<b`

This range operator includes element a but not element b. Like above, there are two different types of half-open ranges: Range and CountableRange.

1. `Range`

As with ClosedRange, you can access the elements of a collection with a Range. Example:

let myRange: Range = 1..<3

let myArray = ["a", "b", "c", "d", "e"]
myArray[myRange] // ["b", "c"]

Again, though, you cannot iterate over a Range because it is only comparable, not stridable.

2. `CountableRange`

A CountableRange allows iteration.

let myRange: CountableRange = 1..<3

let myArray = ["a", "b", "c", "d", "e"]
myArray[myRange] // ["b", "c"]

for index in myRange {
    print(myArray[index])
}

NSRange

You can (must) still use NSRange at times in Swift (when making attributed strings, for example), so it is helpful to know how to make one.

let myNSRange = NSRange(location: 3, length: 2)

Note that this is location and length, not start index and end index. The example here is similar in meaning to the Swift range 3..<5. However, since the types are different, they are not interchangeable.

Ranges with Strings

The ... and ..< range operators are a shorthand way of creating ranges. For example:

let myRange = 1..<3

The long hand way to create the same range would be

let myRange = CountableRange<Int>(uncheckedBounds: (lower: 1, upper: 3)) // 1..<3

You can see that the index type here is Int. That doesn't work for String, though, because Strings are made of Characters and not all characters are the same size. (Read this for more info.) An emoji like 😀, for example, takes more space than the letter "b".

Problem with NSRange

Try experimenting with NSRange and an NSString with emoji and you'll see what I mean. Headache.

let myNSRange = NSRange(location: 1, length: 3)

let myNSString: NSString = "abcde"
myNSString.substring(with: myNSRange) // "bcd"

let myNSString2: NSString = "a😀cde"
myNSString2.substring(with: myNSRange) // "😀c"    Where is the "d"!?

The smiley face takes two UTF-16 code units to store, so it gives the unexpected result of not including the "d".

Swift Solution

Because of this, with Swift Strings you use Range<String.Index>, not Range<Int>. The String Index is calculated based on a particular string so that it knows if there are any emoji or extended grapheme clusters.

Example

var myString = "abcde"
let start = myString.index(myString.startIndex, offsetBy: 1)
let end = myString.index(myString.startIndex, offsetBy: 4)
let myRange = start..<end
myString[myRange] // "bcd"

myString = "a😀cde"
let start2 = myString.index(myString.startIndex, offsetBy: 1)
let end2 = myString.index(myString.startIndex, offsetBy: 4)
let myRange2 = start2..<end2
myString[myRange2] // "😀cd"

One-sided Ranges: `a...` and `...b` and `..<b`

In Swift 4 things were simplified a bit. Whenever the starting or ending point of a range can be inferred, you can leave it off.

Int

You can use one-sided integer ranges to iterate over collections. Here are some examples from the documentation.

// iterate from index 2 to the end of the array
for name in names[2...] {
    print(name)
}

// iterate from the beginning of the array to index 2
for name in names[...2] {
    print(name)
}

// iterate from the beginning of the array up to but not including index 2
for name in names[..<2] {
    print(name)
}

// the range from negative infinity to 5. You can't iterate forward
// over this because the starting point in unknown.
let range = ...5
range.contains(7)   // false
range.contains(4)   // true
range.contains(-1)  // true

// You can iterate over this but it will be an infinate loop 
// so you have to break out at some point.
let range = 5...

String

This also works with String ranges. If you are making a range with str.startIndex or str.endIndex at one end, you can leave it off. The compiler will infer it.

Given

var str = "Hello, playground"
let index = str.index(str.startIndex, offsetBy: 5)

let myRange = ..<index    // Hello

You can go from the index to str.endIndex by using ...

var str = "Hello, playground"
let index = str.index(str.endIndex, offsetBy: -10)
let myRange = index...        // playground

Further Study

String Range examples
Range Operator documentation
Strings and Characters documentation

Solution 2:

Xcode 8 beta 2 • Swift 3

let myString = "Hello World"
let myRange = myString.startIndex..<myString.index(myString.startIndex, offsetBy: 5)
let mySubString = myString.substring(with: myRange)   // Hello

Xcode 7 • Swift 2.0

let myString = "Hello World"
let myRange = Range<String.Index>(start: myString.startIndex, end: myString.startIndex.advancedBy(5))

let mySubString = myString.substringWithRange(myRange)   // Hello

or simply

let myString = "Hello World"
let myRange = myString.startIndex..<myString.startIndex.advancedBy(5)
let mySubString = myString.substringWithRange(myRange)   // Hello

Solution 3:

I find it surprising that, even in Swift 4, there's still no simple native way to express a String range using Int. The only String methods that let you supply an Int as a way of obtaining a substring by range are prefix and suffix.

It is useful to have on hand some conversion utilities, so that we can talk like NSRange when speaking to a String. Here's a utility that takes a location and length, just like NSRange, and returns a Range<String.Index>:

func range(_ start:Int, _ length:Int) -> Range<String.Index> {
    let i = self.index(start >= 0 ? self.startIndex : self.endIndex,
        offsetBy: start)
    let j = self.index(i, offsetBy: length)
    return i..<j
}

For example, "hello".range(0,1)" is the Range<String.Index> embracing the first character of "hello". As a bonus, I've allowed negative locations: "hello".range(-1,1)" is the Range<String.Index> embracing the last character of "hello".

It is useful also to convert a Range<String.Index> to an NSRange, for those moments when you have to talk to Cocoa (for example, in dealing with NSAttributedString attribute ranges). Swift 4 provides a native way to do that:

let nsrange = NSRange(range, in:s) // where s is the string

We can thus write another utility where we go directly from a String location and length to an NSRange:

extension String {
    func nsRange(_ start:Int, _ length:Int) -> NSRange {
        return NSRange(self.range(start,length), in:self)
    }
}

Solution 4:

Use like this

var start = str.startIndex // Start at the string's start index
var end = advance(str.startIndex, 5) // Take start index and advance 5 characters forward
var range: Range<String.Index> = Range<String.Index>(start: start,end: end)

let firstFiveDigit =  str.substringWithRange(range)

print(firstFiveDigit)

Output : Hello

How to create range in Swift?

Solution 1:

Closed Ranges: `a...b`

1. `ClosedRange`

2. `CountableClosedRange`

Half-Open Ranges: `a..<b`

1. `Range`

2. `CountableRange`

NSRange

Ranges with Strings

One-sided Ranges: `a...` and `...b` and `..<b`

See also:

Further Study

Solution 2:

Solution 3:

Solution 4:

Related

Recent Posts

How to create range in Swift?

Solution 1:

Closed Ranges: a...b

1. ClosedRange

2. CountableClosedRange

Half-Open Ranges: a..<b

1. Range

2. CountableRange

NSRange

Ranges with Strings

One-sided Ranges: a... and ...b and ..<b

See also:

Further Study

Solution 2:

Solution 3:

Solution 4:

Related

Recent Posts

Closed Ranges: `a...b`

1. `ClosedRange`

2. `CountableClosedRange`

Half-Open Ranges: `a..<b`

1. `Range`

2. `CountableRange`

One-sided Ranges: `a...` and `...b` and `..<b`