Updating nested array inside array mongodb [duplicate]
MongoDB 3.6 and newer
With MongoDB 3.6 and above comes a new feature that allows you to update nested arrays by using the positional filtered $\[<identifier>\] syntax in order to match the specific elements and apply different conditions through arrayFilters in the update statement:
const { oid, pid } = req.params;
const { name, oName, description, type } = req.body;
collection.update(
{
"_id": 1,
"operations": {
"$elemMatch": {
oid, "parameters.pid": pid
}
}
},
{ "$set": {
"operations.$[outer].parameters.$[inner].name": name,
"operations.$[outer].parameters.$[inner].description": description,
"operations.$[outer].parameters.$[inner].oName": oName,
"operations.$[outer].parameters.$[inner].type": type
} },
{ "arrayFilters": [
{ "outer.oid": oid },
{ "inner.pid": pid }
] }, (err, result) => {
if (err) {
console.log('Error updating service: ' + err);
res.send({'error':'An error has occurred'});
} else {
// console.log('' + result + ' document(s) updated');
res.send(result);
}
});
For MongoDB 3.4 and older:
As @wdberkeley mentioned in his comment:
MongoDB doesn't support matching into more than one level of an array. Consider altering your document model so each document represents an operation, with information common to a set of operations duplicated in the operation documents.
I concur with the above and would recommend redesigning your schema as MongoDB engine does not support multiple positional operators ( See Multiple use of the positional $ operator to update nested arrays)
However, if you know the index of the operations array that has the parameters object to be updated beforehand then the update query will be:
db.collection.update(
{
"_id" : "04",
"operations.parameters.pid": "011"
},
{
"$set": {
"operations.0.parameters.$.name": "foo",
"operations.0.parameters.$.description": "bar",
"operations.0.parameters.$.type": "foo"
}
}
)
EDIT:
If you would like to create the $set conditions on the fly i.e. something which would help you get the indexes for the objects and then modify accordingly, then consider using MapReduce.
Currently this seems to be not possible using the aggregation framework. There is an unresolved open JIRA issue linked to it. However, a workaround is possible with MapReduce. The basic idea with MapReduce is that it uses JavaScript as its query language but this tends to be fairly slower than the aggregation framework and should not be used for real-time data analysis.
In your MapReduce operation, you need to define a couple of steps i.e. the mapping step (which maps an operation into every document in the collection, and the operation can either do nothing or emit some object with keys and projected values) and reducing step (which takes the list of emitted values and reduces it to a single element).
For the map step, you ideally would want to get for every document in the collection, the index for each operations array field and another key that contains the $set keys.
Your reduce step would be a function (which does nothing) simply defined as var reduce = function() {};
The final step in your MapReduce operation will then create a separate collection operations that contains the emitted operations array object along with a field with the $set conditions. This collection can be updated periodically when you run the MapReduce operation on the original collection.
Altogether, this MapReduce method would look like:
var map = function(){
for(var i = 0; i < this.operations.length; i++){
emit(
{
"_id": this._id,
"index": i
},
{
"index": i,
"operations": this.operations[i],
"update": {
"name": "operations." + i.toString() + ".parameters.$.name",
"description": "operations." + i.toString() + ".parameters.$.description",
"type": "operations." + i.toString() + ".parameters.$.type"
}
}
);
}
};
var reduce = function(){};
db.collection.mapReduce(
map,
reduce,
{
"out": {
"replace": "operations"
}
}
);
Querying the output collection operations from the MapReduce operation will typically give you the result:
db.operations.findOne()
Output:
{
"_id" : {
"_id" : "03",
"index" : 0
},
"value" : {
"index" : 0,
"operations" : {
"_id" : "96",
"oName" : "test op 52222222222",
"sid" : "04",
"name" : "test op 52222222222",
"oid" : "99",
"description" : "testing",
"returntype" : "test",
"parameters" : [
{
"oName" : "Param1",
"name" : "foo",
"pid" : "011",
"type" : "foo",
"description" : "bar",
"value" : ""
},
{
"oName" : "Param2",
"name" : "Param2",
"pid" : "012",
"type" : "58222",
"description" : "testing",
"value" : ""
}
]
},
"update" : {
"name" : "operations.0.parameters.$.name",
"description" : "operations.0.parameters.$.description",
"type" : "operations.0.parameters.$.type"
}
}
}
You can then use the cursor from the db.operations.find() method to iterate over and update your collection accordingly:
var oid = req.params.operations;
var pid = req.params.parameters;
var cur = db.operations.find({"_id._id": oid, "value.operations.parameters.pid": pid });
// Iterate through results and update using the update query object set dynamically by using the array-index syntax.
while (cur.hasNext()) {
var doc = cur.next();
var update = { "$set": {} };
// set the update query object
update["$set"][doc.value.update.name] = req.body.name;
update["$set"][doc.value.update.description] = req.body.description;
update["$set"][doc.value.update.type] = req.body.type;
db.collection.update(
{
"_id" : oid,
"operations.parameters.pid": pid
},
update
);
};
If it is data that is changed frequently, you should flatten the structure and separate the data that changes a lot from that which does not.
If it is data that does not change often, and the entire data object is not massive, just modify the object client-side, and update the entire object.
We will try to find index of outer array(i) and inner array(j)and then update
collection.findById(04)
.then(result =>{
for(let i = 0; i<result.operations.length; i++){
if(result.operation[i]._id == "99"){
let parameters = result.operations[i].parameters;`enter code here`
for(let j = 0; j<parameters.length; j++){
if(parameters[j].pid == "011"){
console.log("i", i);
console.log("j", j);
let data = {}
data["operations." + i + ".parameters." + j + ".oName"] = updateoName
data["operations." + i + ".parameters." + j + ".name"] = updatename
data["operations." + i + ".parameters." + j + ".pid"] = updatepid
data["operations." + i + ".parameters." + j + ".description"] = updatedescription
data["operations." + i + ".parameters." + j + ".value"] = updatevalue
console.log(data)
collection.update({
"_id": "04"
},{
$set: data
})
.then(dbModel => res.json(dbModel))
}
}
}
}
})Starting with mongo version 3.6 you can use the $[] in Conjunction with $[] to Update Nested Arrays
Update Nested Arrays in Conjunction with $[]
The $[] filtered positional operator, in conjunction with all $[] positional operator can be used to update nested arrays.
https://docs.mongodb.com/manual/reference/operator/update/positional-filtered/#position-nested-arrays-filtered