POST multipart/form-data with Objective-C

The process is as follows:

1. Create dictionary with the userName, userEmail, and userPassword parameters.

   NSDictionary *params = @{@"userName"     : @"rob",
                            @"userEmail"    : @"[email protected]",
                            @"userPassword" : @"password"};
   

2. Determine the path for the image:

   NSString *path = [[NSBundle mainBundle] pathForResource:@"avatar" ofType:@"png"];
   

3. Create the request:

   NSString *boundary = [self generateBoundaryString];
   
   // configure the request
   
   NSMutableURLRequest *request = [[NSMutableURLRequest alloc] initWithURL:url];
   [request setHTTPMethod:@"POST"];
   
   // set content type
   
   NSString *contentType = [NSString stringWithFormat:@"multipart/form-data; boundary=%@", boundary];
   [request setValue:contentType forHTTPHeaderField: @"Content-Type"];
   
   // create body
   
   NSData *httpBody = [self createBodyWithBoundary:boundary parameters:params paths:@[path] fieldName:fieldName];
   

4. This is the method used above to build the body of the request:

   - (NSData *)createBodyWithBoundary:(NSString *)boundary
                           parameters:(NSDictionary *)parameters
                                paths:(NSArray *)paths
                            fieldName:(NSString *)fieldName {
       NSMutableData *httpBody = [NSMutableData data];
   
       // add params (all params are strings)
   
       [parameters enumerateKeysAndObjectsUsingBlock:^(NSString *parameterKey, NSString *parameterValue, BOOL *stop) {
           [httpBody appendData:[[NSString stringWithFormat:@"--%@\r\n", boundary] dataUsingEncoding:NSUTF8StringEncoding]];
           [httpBody appendData:[[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"%@\"\r\n\r\n", parameterKey] dataUsingEncoding:NSUTF8StringEncoding]];
           [httpBody appendData:[[NSString stringWithFormat:@"%@\r\n", parameterValue] dataUsingEncoding:NSUTF8StringEncoding]];
       }];
   
       // add image data
   
       for (NSString *path in paths) {
           NSString *filename  = [path lastPathComponent];
           NSData   *data      = [NSData dataWithContentsOfFile:path];
           NSString *mimetype  = [self mimeTypeForPath:path];
   
           [httpBody appendData:[[NSString stringWithFormat:@"--%@\r\n", boundary] dataUsingEncoding:NSUTF8StringEncoding]];
           [httpBody appendData:[[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"%@\"; filename=\"%@\"\r\n", fieldName, filename] dataUsingEncoding:NSUTF8StringEncoding]];
           [httpBody appendData:[[NSString stringWithFormat:@"Content-Type: %@\r\n\r\n", mimetype] dataUsingEncoding:NSUTF8StringEncoding]];
           [httpBody appendData:data];
           [httpBody appendData:[@"\r\n" dataUsingEncoding:NSUTF8StringEncoding]];
       }
   
       [httpBody appendData:[[NSString stringWithFormat:@"--%@--\r\n", boundary] dataUsingEncoding:NSUTF8StringEncoding]];
   
       return httpBody;
   }
   

5. The above uses the following utility methods:

   @import MobileCoreServices;    // only needed in iOS
   
   - (NSString *)mimeTypeForPath:(NSString *)path {
       // get a mime type for an extension using MobileCoreServices.framework
   
       CFStringRef extension = (__bridge CFStringRef)[path pathExtension];
       CFStringRef UTI = UTTypeCreatePreferredIdentifierForTag(kUTTagClassFilenameExtension, extension, NULL);
       assert(UTI != NULL);
   
       NSString *mimetype = CFBridgingRelease(UTTypeCopyPreferredTagWithClass(UTI, kUTTagClassMIMEType));
       assert(mimetype != NULL);
   
       CFRelease(UTI);
   
       return mimetype;
   }
   
   - (NSString *)generateBoundaryString {
       return [NSString stringWithFormat:@"Boundary-%@", [[NSUUID UUID] UUIDString]];
   }
   

6. Then submit the request. There are many, many options here.

   For example, if using NSURLSession, you could create NSURLSessionUploadTask:

   NSURLSession *session = [NSURLSession sharedSession];  // use sharedSession or create your own
   
   NSURLSessionTask *task = [session uploadTaskWithRequest:request fromData:httpBody completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) {
       if (error) {
           NSLog(@"error = %@", error);
           return;
       }
   
       NSString *result = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
       NSLog(@"result = %@", result);
   }];
   [task resume];
   

   Or you could create a NSURLSessionDataTask:

   request.HTTPBody = httpBody;
   
   NSURLSessionTask *task = [session dataTaskWithRequest:request completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) {
       if (error) {
           NSLog(@"error = %@", error);
           return;
       }
   
       NSString *result = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
       NSLog(@"result = %@", result);
   }];
   [task resume];
   

   The above assumes that the server is just returning text response. It's better if the server returned JSON, in which case you'd use NSJSONSerialization rather than NSString method initWithData.

   Likewise, I'm using the completion block renditions of NSURLSession above, but feel free to use the richer delegate-based renditions, too. But that seems beyond the scope of this question, so I'll leave that to you.

But hopefully this illustrates the idea.

I'd be remiss if I didn't point that, much easier than the above, you can use AFNetworking, repeating steps 1 and 2 above, but then just calling:

AFHTTPSessionManager *manager = [AFHTTPSessionManager manager];
manager.responseSerializer = [AFHTTPResponseSerializer serializer]; // only needed if the server is not returning JSON; if web service returns JSON, remove this line
NSURLSessionTask *task = [manager POST:urlString parameters:params constructingBodyWithBlock:^(id<AFMultipartFormData> formData) {
    NSError *error;
    if (![formData appendPartWithFileURL:[NSURL fileURLWithPath:path] name:@"avatar" fileName:[path lastPathComponent] mimeType:@"image/png" error:&error]) {
        NSLog(@"error appending part: %@", error);
    }
}  progress:nil success:^(NSURLSessionTask *task, id responseObject) {
    NSLog(@"responseObject = %@", responseObject);
} failure:^(NSURLSessionTask *task, NSError *error) {
    NSLog(@"error = %@", error);
}];

if (!task) {
    NSLog(@"Creation of task failed.");
}

POST multiple images using multipart or form-data with Objective-C

-(void)multipleimageandstring
{
    NSString *urlString=@"URL NAME";

    NSMutableURLRequest *request = [[NSMutableURLRequest alloc] init] ;
    [request setURL:[NSURL URLWithString:urlString]];
    [request setHTTPMethod:@"POST"];

    NSMutableData *body = [NSMutableData data];

    NSString *boundary = @"---------------------------14737809831466499882746641449";
    NSString *contentType = [NSString stringWithFormat:@"multipart/form-data; boundary=%@", boundary];
    [request addValue:contentType forHTTPHeaderField:@"Content-Type"];

    // file
    float low_bound = 0;
    float high_bound =5000;
    float rndValue = (((float)arc4random()/0x100000000)*(high_bound-low_bound)+low_bound);//image1
    int intRndValue = (int)(rndValue + 0.5);
   NSString *str_image1 = [@(intRndValue) stringValue];

    UIImage *chosenImage1=[UIImage imageNamed:@"Purchase_GUI_curves-12 copy.png"];

    NSData *imageData = UIImageJPEGRepresentation(chosenImage1, 90);
    [body appendData:[[NSString stringWithFormat:@"--%@\r\n", boundary] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"files\"; filename=\"%@.png\"\r\n",str_image1] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[@"Content-Type: application/octet-stream\r\n\r\n" dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[NSData dataWithData:imageData]];
    [body appendData:[@"\r\n" dataUsingEncoding:NSUTF8StringEncoding]];





    [body appendData:[[NSString stringWithFormat:@"--%@\r\n", boundary] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"name\"\r\n\r\n"] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[@"Nilesh" dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[@"\r\n" dataUsingEncoding:NSUTF8StringEncoding]];

    [body appendData:[[NSString stringWithFormat:@"--%@\r\n", boundary] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"apipassword\"\r\n\r\n"] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[[NSString stringWithString:app.password] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[@"\r\n" dataUsingEncoding:NSUTF8StringEncoding]];

    [body appendData:[[NSString stringWithFormat:@"--%@\r\n", boundary] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"adminId\"\r\n\r\n"] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[[NSString stringWithString:app.adminId] dataUsingEncoding:NSUTF8StringEncoding]];
    [body appendData:[@"\r\n" dataUsingEncoding:NSUTF8StringEncoding]];

    // close form
    [body appendData:[[NSString stringWithFormat:@"--%@--\r\n", boundary] dataUsingEncoding:NSUTF8StringEncoding]];
    // set request body
    [request setHTTPBody:body];

    //return and test
    NSData *returnData = [NSURLConnection sendSynchronousRequest:request returningResponse:nil error:nil];
    NSString *returnString = [[NSString alloc] initWithData:returnData encoding:NSUTF8StringEncoding];

    NSLog(@"%@", returnString);

}