Error when connecting USB Drive to VirtualBox virtual machine

How can I use external hard drive via USB connection on a virtual machine using VirtualBox?

I ejected the hard disk from OS X host, then the disk becomes available in OS X virtual machine.

Clicking on the disk throws an error:

USB Settings:

Why is that?

EDIT: I added external drive to the USB panel. I am still getting an error `Failed to attach the USB device Seagate Expansion to the virtual machine El Capitan3.

Failed to create a proxy device for the USB device. (Error: VERR_PDM_NO_USB_PORTS).

Result Code: NS_ERROR_FAILURE (0x80004005)
Component: ConsoleWrap
Interface: IConsole {872da645-4a9b-1727-bee2-5585105b9eed}

Solution 1:

I assume the you have downloaded and installed the "Oracle VM VirtualBox Extension Pack". This enables support for USB 2.0 and USB 3.0 devices, VirtualBox RDP and PXE boot for Intel cards.

In the Ports window pane, I do not see where you have added a USB Device Filter. Below is where I added a 2 GB USB flash drive.

An alternative to ejecting the USB external drive would be the following:

Unmount the USB drive before starting the virtual machine. The timing is very important, since OS X will try to remount the drive automatically. Use the Terminal application command

diskutil list

to determine the identifier for the external USB drive. For example, say the identifier is disk1, then the command to execute, just before you start the virtual machine, would be

diskutil unmountdisk /dev/disk1

Update:

Actually, I was able to gain access to the USB flash drive after starting the virtual machine. All I had to do is execute the

diskutil unmountdisk /dev/disk1

command while the virtual machine was running.

Accessing the External USB Drive as a Virtual SATA Drive

The following Terminal application commands create the file share.vmdk needed to access the external USB drive as a virtual SATA drive. This file will be stored in the folder named Share on the your Desktop. I assume the identifier of the external drive is disk1.

cd ~
cd Desktop
mkdir Share
cd Share
diskutil unmountdisk /dev/disk1
sudo chmod go+rw /dev/disk1*
diskutil unmountdisk /dev/disk1
vboxmanage  internalcommands  createrawvmdk  -filename  "$PWD/share.vmdk"  -rawdisk  /dev/disk1

Note: The effects of the sudo chmod go+rw /dev/disk1* command are temporary. The permissions may revert, if you restart the computer or eject the external USB drive.

You can now add the share.vmdk file as a second drive in your virtual machine. Note: Before clicking on the "Open" button, you will need to execute the command diskutil unmountdisk /dev/disk1.

Before starting the virtual machine, you will be required to execute the command diskutil unmountdisk /dev/disk1.

Note: You can stop OS X from automatically mounting the external USB drive by creating/editing the file /etc/fstab. See man fstab for more information.

Accessing a Read/Write .dmg File as a Virtual SATA Drive

Use the Disk Utility application to create a new blank disk image. Below is a example where the share.dmg is created in the ~/Desktop/Share folder. (This was done using Yosemite OS X 10.10) Other types of disk images can also be created and used.

Again you need to create a share.vmdk file. The commands are given below.

cd ~/Desktop/Share
diskutil unmountdisk /dev/disk1
vboxmanage  internalcommands  createrawvmdk  -filename  "$PWD/share.vmdk"  -rawdisk  /dev/disk1

Next, execute the same steps already given to access the USB drive.