Minimum volume is too loud when using Plantronics Bluetooth headphone

I have this problem using an iPhone 6 or iPhone 5s with either of two sets of wireless headphones - Plantronics Backbeat Pro and Plantronics Backbeat Sense.

The volume over bluetooth is much higher for the same number of volume bars compared to wired, to the point where I'm severely lacking accuracy at the low volume end. 1 bar is muted, 2 bars is too loud for when listening in quiet environments. When wired the volume range is perfect.

Volume cap doesn't fix this. Analog control of the volume in the popup control center is not enough.

Within iOS, EQ is off, volume limit is on (EU limit) Sound check off.

How can I fix this?

Further info:

I've tried various manoeuvres with pairing, un-pairing, updating firmware, pairing to different devices, and back again. I don't have a non-apple device to compare with, but the same behaviour occurs with two different iPhones and the two different headsets as described. Plantronics support struggled to see how this was a problem, but acknowledged the discrepancy between wired and wireless volume ranges. I had a similar problem with a pair of V-moda crossfade wireless headphones.

I'm not sure if this is a apple or bluetooth issue (i.e. 'profile' problem) or a hardware issue i.e. the gain is just too high.

I've found that this issue is head-phone specific, perhaps brand-specific or in all likelihood, bluetooth implementation specific. Of the few others I've since tried I found that Bose wireless headphones to not have this issue. However, other problems with distortion sometimes occurred instead!

The music settings don't seem to work for Spotify or other streaming apps. Many of them have built in equalizers to perform essentially the same function. Within Spotify, navigate to the settings menu. Under Playback, you can set up a custom equalizer. Lower all of the settings equally to decrease the base volume.

Have experienced the same issue when playing music over bluetooth from an iPhone. However with the Plantronics Backbeat Pro headphones I've found that the "OpenMic" function can be used to reduce the headphone volume to a certain extent:

• The microphone button on the base of the right earphone turns on "OpenMic" which reduces the music volume in order to hear noise from the surroundings.
• With "OpenMic" activated, the volume dial on the headphones controls the microphone volume, this can be turned down to silent so that you only hear your music, but at a lower volume.

Not an ideal solution and likely specific to Plantronics headphones, but I find this useful for reducing the volume in quiet environments.