How do you add an in-app purchase to an iOS application?
Swift Users
Swift users can check out My Swift Answer for this question.
Or, check out Yedidya Reiss's Answer, which translates this Objective-C code to Swift.
Objective-C Users
The rest of this answer is written in Objective-C
App Store Connect
- Go to appstoreconnect.apple.com and log in
- Click
My Appsthen click the app you want do add the purchase to - Click the
Featuresheader, and then selectIn-App Purchaseson the left - Click the
+icon in the middle - For this tutorial, we are going to be adding an in-app purchase to remove ads, so choose
non-consumable. If you were going to send a physical item to the user, or give them something that they can buy more than once, you would chooseconsumable. - For the reference name, put whatever you want (but make sure you know what it is)
- For product id put
tld.websitename.appname.referencenamethis will work the best, so for example, you could usecom.jojodmo.blix.removeads - Choose
cleared for saleand then choose price tier as 1 (99¢). Tier 2 would be $1.99, and tier 3 would be $2.99. The full list is available if you clickview pricing matrixI recommend you use tier 1, because that's usually the most anyone will ever pay to remove ads. - Click the blue
add languagebutton, and input the information. This will ALL be shown to the customer, so don't put anything you don't want them seeing - For
hosting content with Applechoose no - You can leave the review notes blank FOR NOW.
- Skip the
screenshot for reviewFOR NOW, everything we skip we will come back to. - Click 'save'
It could take a few hours for your product ID to register in App Store Connect, so be patient.
Setting up your project
Now that you've set up your in-app purchase information on App Store Connect, go into your Xcode project, and go to the application manager (blue page-like icon at the top of where your methods and header files are) click on your app under targets (should be the first one) then go to general. At the bottom, you should see linked frameworks and libraries click the little plus symbol and add the framework StoreKit.framework If you don't do this, the in-app purchase will NOT work!
If you are using Objective-C as the language for your app, you should skip these five steps. Otherwise, if you are using Swift, you can follow My Swift Answer for this question, here, or, if you prefer to use Objective-C for the In-App Purchase code but are using Swift in your app, you can do the following:
-
Create a new
.h(header) file by going toFile>New>File...(Command ⌘ + N). This file will be referred to as "Your.hfile" in the rest of the tutorial -
When prompted, click Create Bridging Header. This will be our bridging header file. If you are not prompted, go to step 3. If you are prompted, skip step 3 and go directly to step 4.
-
Create another
.hfile namedBridge.hin the main project folder, Then go to the Application Manager (the blue page-like icon), then select your app in theTargetssection, and clickBuild Settings. Find the option that says Swift Compiler - Code Generation, and then set the Objective-C Bridging Header option toBridge.h -
In your bridging header file, add the line
#import "MyObjectiveCHeaderFile.h", whereMyObjectiveCHeaderFileis the name of the header file that you created in step one. So, for example, if you named your header file InAppPurchase.h, you would add the line#import "InAppPurchase.h"to your bridge header file. -
Create a new Objective-C Methods (
.m) file by going toFile>New>File...(Command ⌘ + N). Name it the same as the header file you created in step 1. For example, if you called the file in step 1 InAppPurchase.h, you would call this new file InAppPurchase.m. This file will be referred to as "Your.mfile" in the rest of the tutorial.
Coding
Now we're going to get into the actual coding. Add the following code into your .h file:
BOOL areAdsRemoved;
- (IBAction)restore;
- (IBAction)tapsRemoveAds;
Next, you need to import the StoreKit framework into your .m file, as well as add SKProductsRequestDelegate and SKPaymentTransactionObserver after your @interface declaration:
#import <StoreKit/StoreKit.h>
//put the name of your view controller in place of MyViewController
@interface MyViewController() <SKProductsRequestDelegate, SKPaymentTransactionObserver>
@end
@implementation MyViewController //the name of your view controller (same as above)
//the code below will be added here
@end
and now add the following into your .m file, this part gets complicated, so I suggest that you read the comments in the code:
//If you have more than one in-app purchase, you can define both of
//of them here. So, for example, you could define both kRemoveAdsProductIdentifier
//and kBuyCurrencyProductIdentifier with their respective product ids
//
//for this example, we will only use one product
#define kRemoveAdsProductIdentifier @"put your product id (the one that we just made in App Store Connect) in here"
- (IBAction)tapsRemoveAds{
NSLog(@"User requests to remove ads");
if([SKPaymentQueue canMakePayments]){
NSLog(@"User can make payments");
//If you have more than one in-app purchase, and would like
//to have the user purchase a different product, simply define
//another function and replace kRemoveAdsProductIdentifier with
//the identifier for the other product
SKProductsRequest *productsRequest = [[SKProductsRequest alloc] initWithProductIdentifiers:[NSSet setWithObject:kRemoveAdsProductIdentifier]];
productsRequest.delegate = self;
[productsRequest start];
}
else{
NSLog(@"User cannot make payments due to parental controls");
//this is called the user cannot make payments, most likely due to parental controls
}
}
- (void)productsRequest:(SKProductsRequest *)request didReceiveResponse:(SKProductsResponse *)response{
SKProduct *validProduct = nil;
int count = [response.products count];
if(count > 0){
validProduct = [response.products objectAtIndex:0];
NSLog(@"Products Available!");
[self purchase:validProduct];
}
else if(!validProduct){
NSLog(@"No products available");
//this is called if your product id is not valid, this shouldn't be called unless that happens.
}
}
- (void)purchase:(SKProduct *)product{
SKPayment *payment = [SKPayment paymentWithProduct:product];
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue] addPayment:payment];
}
- (IBAction) restore{
//this is called when the user restores purchases, you should hook this up to a button
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue] restoreCompletedTransactions];
}
- (void) paymentQueueRestoreCompletedTransactionsFinished:(SKPaymentQueue *)queue
{
NSLog(@"received restored transactions: %i", queue.transactions.count);
for(SKPaymentTransaction *transaction in queue.transactions){
if(transaction.transactionState == SKPaymentTransactionStateRestored){
//called when the user successfully restores a purchase
NSLog(@"Transaction state -> Restored");
//if you have more than one in-app purchase product,
//you restore the correct product for the identifier.
//For example, you could use
//if(productID == kRemoveAdsProductIdentifier)
//to get the product identifier for the
//restored purchases, you can use
//
//NSString *productID = transaction.payment.productIdentifier;
[self doRemoveAds];
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
break;
}
}
}
- (void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions{
for(SKPaymentTransaction *transaction in transactions){
//if you have multiple in app purchases in your app,
//you can get the product identifier of this transaction
//by using transaction.payment.productIdentifier
//
//then, check the identifier against the product IDs
//that you have defined to check which product the user
//just purchased
switch(transaction.transactionState){
case SKPaymentTransactionStatePurchasing: NSLog(@"Transaction state -> Purchasing");
//called when the user is in the process of purchasing, do not add any of your own code here.
break;
case SKPaymentTransactionStatePurchased:
//this is called when the user has successfully purchased the package (Cha-Ching!)
[self doRemoveAds]; //you can add your code for what you want to happen when the user buys the purchase here, for this tutorial we use removing ads
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
NSLog(@"Transaction state -> Purchased");
break;
case SKPaymentTransactionStateRestored:
NSLog(@"Transaction state -> Restored");
//add the same code as you did from SKPaymentTransactionStatePurchased here
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
break;
case SKPaymentTransactionStateFailed:
//called when the transaction does not finish
if(transaction.error.code == SKErrorPaymentCancelled){
NSLog(@"Transaction state -> Cancelled");
//the user cancelled the payment ;(
}
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
break;
}
}
}
Now you want to add your code for what will happen when the user finishes the transaction, for this tutorial, we use removing adds, you will have to add your own code for what happens when the banner view loads.
- (void)doRemoveAds{
ADBannerView *banner;
[banner setAlpha:0];
areAdsRemoved = YES;
removeAdsButton.hidden = YES;
removeAdsButton.enabled = NO;
[[NSUserDefaults standardUserDefaults] setBool:areAdsRemoved forKey:@"areAdsRemoved"];
//use NSUserDefaults so that you can load whether or not they bought it
//it would be better to use KeyChain access, or something more secure
//to store the user data, because NSUserDefaults can be changed.
//You're average downloader won't be able to change it very easily, but
//it's still best to use something more secure than NSUserDefaults.
//For the purpose of this tutorial, though, we're going to use NSUserDefaults
[[NSUserDefaults standardUserDefaults] synchronize];
}
If you don't have ads in your application, you can use any other thing that you want. For example, we could make the color of the background blue. To do this we would want to use:
- (void)doRemoveAds{
[self.view setBackgroundColor:[UIColor blueColor]];
areAdsRemoved = YES
//set the bool for whether or not they purchased it to YES, you could use your own boolean here, but you would have to declare it in your .h file
[[NSUserDefaults standardUserDefaults] setBool:areAdsRemoved forKey:@"areAdsRemoved"];
//use NSUserDefaults so that you can load wether or not they bought it
[[NSUserDefaults standardUserDefaults] synchronize];
}
Now, somewhere in your viewDidLoad method, you're going to want to add the following code:
areAdsRemoved = [[NSUserDefaults standardUserDefaults] boolForKey:@"areAdsRemoved"];
[[NSUserDefaults standardUserDefaults] synchronize];
//this will load wether or not they bought the in-app purchase
if(areAdsRemoved){
[self.view setBackgroundColor:[UIColor blueColor]];
//if they did buy it, set the background to blue, if your using the code above to set the background to blue, if your removing ads, your going to have to make your own code here
}
Now that you have added all the code, go into your .xib or storyboard file, and add two buttons, one saying purchase, and the other saying restore. Hook up the tapsRemoveAds IBAction to the purchase button that you just made, and the restore IBAction to the restore button. The restore action will check if the user has previously purchased the in-app purchase, and give them the in-app purchase for free if they do not already have it.
Submitting for review
Next, go into App Store Connect, and click Users and Access then click the Sandbox Testers header, and then click the + symbol on the left where it says Testers. You can just put in random things for the first and last name, and the e-mail does not have to be real - you just have to be able to remember it. Put in a password (which you will have to remember) and fill in the rest of the info. I would recommend that you make the Date of Birth a date that would make the user 18 or older. App Store Territory HAS to be in the correct country. Next, log out of your existing iTunes account (you can log back in after this tutorial).
Now, run your application on your iOS device, if you try running it on the simulator, the purchase will always error, you HAVE TO run it on your iOS device. Once the app is running, tap the purchase button. When you are prompted to log into your iTunes account, log in as the test user that we just created. Next,when it asks you to confirm the purchase of 99¢ or whatever you set the price tier too, TAKE A SCREEN SNAPSHOT OF IT this is what your going to use for your screenshot for review on App Store Connect. Now cancel the payment.
Now, go to App Store Connect, then go to My Apps > the app you have the In-app purchase on > In-App Purchases. Then click your in-app purchase and click edit under the in-app purchase details. Once you've done that, import the photo that you just took on your iPhone into your computer, and upload that as the screenshot for review, then, in review notes, put your TEST USER e-mail and password. This will help apple in the review process.
After you have done this, go back onto the application on your iOS device, still logged in as the test user account, and click the purchase button. This time, confirm the payment Don't worry, this will NOT charge your account ANY money, test user accounts get all in-app purchases for free After you have confirmed the payment, make sure that what happens when the user buys your product actually happens. If it doesn't, then thats going to be an error with your doRemoveAds method. Again, I recommend using changing the background to blue for testing the in-app purchase, this should not be your actual in-app purchase though. If everything works and you're good to go! Just make sure to include the in-app purchase in your new binary when you upload it to App Store Connect!
Here are some common errors:
Logged: No Products Available
This could mean four things:
- You didn't put the correct in-app purchase ID in your code (for the identifier
kRemoveAdsProductIdentifierin the above code - You didn't clear your in-app purchase for sale on App Store Connect
- You didn't wait for the in-app purchase ID to be registered in App Store Connect. Wait a couple hours from creating the ID, and your problem should be resolved.
- You didn't complete filling your Agreements, Tax, and Banking info.
If it doesn't work the first time, don't get frustrated! Don't give up! It took me about 5 hours straight before I could get this working, and about 10 hours searching for the right code! If you use the code above exactly, it should work fine. Feel free to comment if you have any questions at all.
I hope this helps to all of those hoping to add an in-app purchase to their iOS application. Cheers!
Just translate Jojodmo code to Swift:
class InAppPurchaseManager: NSObject , SKProductsRequestDelegate, SKPaymentTransactionObserver{
//If you have more than one in-app purchase, you can define both of
//of them here. So, for example, you could define both kRemoveAdsProductIdentifier
//and kBuyCurrencyProductIdentifier with their respective product ids
//
//for this example, we will only use one product
let kRemoveAdsProductIdentifier = "put your product id (the one that we just made in iTunesConnect) in here"
@IBAction func tapsRemoveAds() {
NSLog("User requests to remove ads")
if SKPaymentQueue.canMakePayments() {
NSLog("User can make payments")
//If you have more than one in-app purchase, and would like
//to have the user purchase a different product, simply define
//another function and replace kRemoveAdsProductIdentifier with
//the identifier for the other product
let set : Set<String> = [kRemoveAdsProductIdentifier]
let productsRequest = SKProductsRequest(productIdentifiers: set)
productsRequest.delegate = self
productsRequest.start()
}
else {
NSLog("User cannot make payments due to parental controls")
//this is called the user cannot make payments, most likely due to parental controls
}
}
func purchase(product : SKProduct) {
let payment = SKPayment(product: product)
SKPaymentQueue.defaultQueue().addTransactionObserver(self)
SKPaymentQueue.defaultQueue().addPayment(payment)
}
func restore() {
//this is called when the user restores purchases, you should hook this up to a button
SKPaymentQueue.defaultQueue().addTransactionObserver(self)
SKPaymentQueue.defaultQueue().restoreCompletedTransactions()
}
func doRemoveAds() {
//TODO: implement
}
/////////////////////////////////////////////////
//////////////// store delegate /////////////////
/////////////////////////////////////////////////
// MARK: - store delegate -
func productsRequest(request: SKProductsRequest, didReceiveResponse response: SKProductsResponse) {
if let validProduct = response.products.first {
NSLog("Products Available!")
self.purchase(validProduct)
}
else {
NSLog("No products available")
//this is called if your product id is not valid, this shouldn't be called unless that happens.
}
}
func paymentQueueRestoreCompletedTransactionsFinished(queue: SKPaymentQueue) {
NSLog("received restored transactions: \(queue.transactions.count)")
for transaction in queue.transactions {
if transaction.transactionState == .Restored {
//called when the user successfully restores a purchase
NSLog("Transaction state -> Restored")
//if you have more than one in-app purchase product,
//you restore the correct product for the identifier.
//For example, you could use
//if(productID == kRemoveAdsProductIdentifier)
//to get the product identifier for the
//restored purchases, you can use
//
//NSString *productID = transaction.payment.productIdentifier;
self.doRemoveAds()
SKPaymentQueue.defaultQueue().finishTransaction(transaction)
break;
}
}
}
func paymentQueue(queue: SKPaymentQueue, updatedTransactions transactions: [SKPaymentTransaction]) {
for transaction in transactions {
switch transaction.transactionState {
case .Purchasing: NSLog("Transaction state -> Purchasing")
//called when the user is in the process of purchasing, do not add any of your own code here.
case .Purchased:
//this is called when the user has successfully purchased the package (Cha-Ching!)
self.doRemoveAds() //you can add your code for what you want to happen when the user buys the purchase here, for this tutorial we use removing ads
SKPaymentQueue.defaultQueue().finishTransaction(transaction)
NSLog("Transaction state -> Purchased")
case .Restored:
NSLog("Transaction state -> Restored")
//add the same code as you did from SKPaymentTransactionStatePurchased here
SKPaymentQueue.defaultQueue().finishTransaction(transaction)
case .Failed:
//called when the transaction does not finish
if transaction.error?.code == SKErrorPaymentCancelled {
NSLog("Transaction state -> Cancelled")
//the user cancelled the payment ;(
}
SKPaymentQueue.defaultQueue().finishTransaction(transaction)
case .Deferred:
// The transaction is in the queue, but its final status is pending external action.
NSLog("Transaction state -> Deferred")
}
}
}
}
Swift Answer
This is meant to supplement my Objective-C answer for Swift users, to keep the Objective-C answer from getting too big.
Setup
First, set up the in-app purchase on appstoreconnect.apple.com. Follow the beginning part of my Objective-C answer (steps 1-13, under the App Store Connect header) for instructions on doing that.
It could take a few hours for your product ID to register in App Store Connect, so be patient.
Now that you've set up your in-app purchase information on App Store Connect, we need to add Apple's framework for in-app-purchases, StoreKit, to the app.
Go into your Xcode project, and go to the application manager (blue page-like icon at the top of the left bar where your app's files are). Click on your app under targets on the left (it should be the first option), then go to "Capabilities" at the top. On the list, you should see an option "In-App Purchase". Turn this capability ON, and Xcode will add StoreKit to your project.
Coding
Now, we're going to start coding!
First, make a new swift file that will manage all of your in-app-purchases. I'm going to call it IAPManager.swift.
In this file, we're going to create a new class, called IAPManager that is a SKProductsRequestDelegate and SKPaymentTransactionObserver. At the top, make sure you import Foundation and StoreKit
import Foundation
import StoreKit
public class IAPManager: NSObject, SKProductsRequestDelegate,
SKPaymentTransactionObserver {
}
Next, we're going to add a variable to define the identifier for our in-app purchase (you could also use an enum, which would be easier to maintain if you have multiple IAPs).
// This should the ID of the in-app-purchase you made on AppStore Connect.
// if you have multiple IAPs, you'll need to store their identifiers in
// other variables, too (or, preferably in an enum).
let removeAdsID = "com.skiplit.removeAds"
Let's add an initializer for our class next:
// This is the initializer for your IAPManager class
//
// A better, and more scaleable way of doing this
// is to also accept a callback in the initializer, and call
// that callback in places like the paymentQueue function, and
// in all functions in this class, in place of calls to functions
// in RemoveAdsManager (you'll see those calls in the code below).
let productID: String
init(productID: String){
self.productID = productID
}
Now, we're going to add the required functions for SKProductsRequestDelegate and SKPaymentTransactionObserver to work:
We'll add the RemoveAdsManager class later
// This is called when a SKProductsRequest receives a response
public func productsRequest(_ request: SKProductsRequest, didReceive response: SKProductsResponse){
// Let's try to get the first product from the response
// to the request
if let product = response.products.first{
// We were able to get the product! Make a new payment
// using this product
let payment = SKPayment(product: product)
// add the new payment to the queue
SKPaymentQueue.default().add(self)
SKPaymentQueue.default().add(payment)
}
else{
// Something went wrong! It is likely that either
// the user doesn't have internet connection, or
// your product ID is wrong!
//
// Tell the user in requestFailed() by sending an alert,
// or something of the sort
RemoveAdsManager.removeAdsFailure()
}
}
// This is called when the user restores their IAP sucessfully
private func paymentQueueRestoreCompletedTransactionsFinished(_ queue: SKPaymentQueue){
// For every transaction in the transaction queue...
for transaction in queue.transactions{
// If that transaction was restored
if transaction.transactionState == .restored{
// get the producted ID from the transaction
let productID = transaction.payment.productIdentifier
// In this case, we have only one IAP, so we don't need to check
// what IAP it is. However, this is useful if you have multiple IAPs!
// You'll need to figure out which one was restored
if(productID.lowercased() == IAPManager.removeAdsID.lowercased()){
// Restore the user's purchases
RemoveAdsManager.restoreRemoveAdsSuccess()
}
// finish the payment
SKPaymentQueue.default().finishTransaction(transaction)
}
}
}
// This is called when the state of the IAP changes -- from purchasing to purchased, for example.
// This is where the magic happens :)
public func paymentQueue(_ queue: SKPaymentQueue, updatedTransactions transactions: [SKPaymentTransaction]){
for transaction in transactions{
// get the producted ID from the transaction
let productID = transaction.payment.productIdentifier
// In this case, we have only one IAP, so we don't need to check
// what IAP it is.
// However, if you have multiple IAPs, you'll need to use productID
// to check what functions you should run here!
switch transaction.transactionState{
case .purchasing:
// if the user is currently purchasing the IAP,
// we don't need to do anything.
//
// You could use this to show the user
// an activity indicator, or something like that
break
case .purchased:
// the user successfully purchased the IAP!
RemoveAdsManager.removeAdsSuccess()
SKPaymentQueue.default().finishTransaction(transaction)
case .restored:
// the user restored their IAP!
IAPTestingHandler.restoreRemoveAdsSuccess()
SKPaymentQueue.default().finishTransaction(transaction)
case .failed:
// The transaction failed!
RemoveAdsManager.removeAdsFailure()
// finish the transaction
SKPaymentQueue.default().finishTransaction(transaction)
case .deferred:
// This happens when the IAP needs an external action
// in order to proceeded, like Ask to Buy
RemoveAdsManager.removeAdsDeferred()
break
}
}
}
Now let's add some functions that can be used to start a purchase or a restore purchases:
// Call this when you want to begin a purchase
// for the productID you gave to the initializer
public func beginPurchase(){
// If the user can make payments
if SKPaymentQueue.canMakePayments(){
// Create a new request
let request = SKProductsRequest(productIdentifiers: [productID])
// Set the request delegate to self, so we receive a response
request.delegate = self
// start the request
request.start()
}
else{
// Otherwise, tell the user that
// they are not authorized to make payments,
// due to parental controls, etc
}
}
// Call this when you want to restore all purchases
// regardless of the productID you gave to the initializer
public func beginRestorePurchases(){
// restore purchases, and give responses to self
SKPaymentQueue.default().add(self)
SKPaymentQueue.default().restoreCompletedTransactions()
}
Next, let's add a new utilities class to manage our IAPs. All of this code could be in one class, but having it multiple makes it a little cleaner. I'm going to make a new class called RemoveAdsManager, and in it, put a few functions
public class RemoveAdsManager{
class func removeAds()
class func restoreRemoveAds()
class func areAdsRemoved() -> Bool
class func removeAdsSuccess()
class func restoreRemoveAdsSuccess()
class func removeAdsDeferred()
class func removeAdsFailure()
}
The first three functions, removeAds, restoreRemoveAds, and areAdsRemoved, are functions that you'll call to do certain actions. The last four are one that will be called by IAPManager.
Let's add some code to the first two functions, removeAds and restoreRemoveAds:
// Call this when the user wants
// to remove ads, like when they
// press a "remove ads" button
class func removeAds(){
// Before starting the purchase, you could tell the
// user that their purchase is happening, maybe with
// an activity indicator
let iap = IAPManager(productID: IAPManager.removeAdsID)
iap.beginPurchase()
}
// Call this when the user wants
// to restore their IAP purchases,
// like when they press a "restore
// purchases" button.
class func restoreRemoveAds(){
// Before starting the purchase, you could tell the
// user that the restore action is happening, maybe with
// an activity indicator
let iap = IAPManager(productID: IAPManager.removeAdsID)
iap.beginRestorePurchases()
}
And lastly, let's add some code to the last five functions.
// Call this to check whether or not
// ads are removed. You can use the
// result of this to hide or show
// ads
class func areAdsRemoved() -> Bool{
// This is the code that is run to check
// if the user has the IAP.
return UserDefaults.standard.bool(forKey: "RemoveAdsPurchased")
}
// This will be called by IAPManager
// when the user sucessfully purchases
// the IAP
class func removeAdsSuccess(){
// This is the code that is run to actually
// give the IAP to the user!
//
// I'm using UserDefaults in this example,
// but you may want to use Keychain,
// or some other method, as UserDefaults
// can be modified by users using their
// computer, if they know how to, more
// easily than Keychain
UserDefaults.standard.set(true, forKey: "RemoveAdsPurchased")
UserDefaults.standard.synchronize()
}
// This will be called by IAPManager
// when the user sucessfully restores
// their purchases
class func restoreRemoveAdsSuccess(){
// Give the user their IAP back! Likely all you'll need to
// do is call the same function you call when a user
// sucessfully completes their purchase. In this case, removeAdsSuccess()
removeAdsSuccess()
}
// This will be called by IAPManager
// when the IAP failed
class func removeAdsFailure(){
// Send the user a message explaining that the IAP
// failed for some reason, and to try again later
}
// This will be called by IAPManager
// when the IAP gets deferred.
class func removeAdsDeferred(){
// Send the user a message explaining that the IAP
// was deferred, and pending an external action, like
// Ask to Buy.
}
Putting it all together, we get something like this:
import Foundation
import StoreKit
public class RemoveAdsManager{
// Call this when the user wants
// to remove ads, like when they
// press a "remove ads" button
class func removeAds(){
// Before starting the purchase, you could tell the
// user that their purchase is happening, maybe with
// an activity indicator
let iap = IAPManager(productID: IAPManager.removeAdsID)
iap.beginPurchase()
}
// Call this when the user wants
// to restore their IAP purchases,
// like when they press a "restore
// purchases" button.
class func restoreRemoveAds(){
// Before starting the purchase, you could tell the
// user that the restore action is happening, maybe with
// an activity indicator
let iap = IAPManager(productID: IAPManager.removeAdsID)
iap.beginRestorePurchases()
}
// Call this to check whether or not
// ads are removed. You can use the
// result of this to hide or show
// ads
class func areAdsRemoved() -> Bool{
// This is the code that is run to check
// if the user has the IAP.
return UserDefaults.standard.bool(forKey: "RemoveAdsPurchased")
}
// This will be called by IAPManager
// when the user sucessfully purchases
// the IAP
class func removeAdsSuccess(){
// This is the code that is run to actually
// give the IAP to the user!
//
// I'm using UserDefaults in this example,
// but you may want to use Keychain,
// or some other method, as UserDefaults
// can be modified by users using their
// computer, if they know how to, more
// easily than Keychain
UserDefaults.standard.set(true, forKey: "RemoveAdsPurchased")
UserDefaults.standard.synchronize()
}
// This will be called by IAPManager
// when the user sucessfully restores
// their purchases
class func restoreRemoveAdsSuccess(){
// Give the user their IAP back! Likely all you'll need to
// do is call the same function you call when a user
// sucessfully completes their purchase. In this case, removeAdsSuccess()
removeAdsSuccess()
}
// This will be called by IAPManager
// when the IAP failed
class func removeAdsFailure(){
// Send the user a message explaining that the IAP
// failed for some reason, and to try again later
}
// This will be called by IAPManager
// when the IAP gets deferred.
class func removeAdsDeferred(){
// Send the user a message explaining that the IAP
// was deferred, and pending an external action, like
// Ask to Buy.
}
}
public class IAPManager: NSObject, SKProductsRequestDelegate, SKPaymentTransactionObserver{
// This should the ID of the in-app-purchase you made on AppStore Connect.
// if you have multiple IAPs, you'll need to store their identifiers in
// other variables, too (or, preferably in an enum).
static let removeAdsID = "com.skiplit.removeAds"
// This is the initializer for your IAPManager class
//
// An alternative, and more scaleable way of doing this
// is to also accept a callback in the initializer, and call
// that callback in places like the paymentQueue function, and
// in all functions in this class, in place of calls to functions
// in RemoveAdsManager.
let productID: String
init(productID: String){
self.productID = productID
}
// Call this when you want to begin a purchase
// for the productID you gave to the initializer
public func beginPurchase(){
// If the user can make payments
if SKPaymentQueue.canMakePayments(){
// Create a new request
let request = SKProductsRequest(productIdentifiers: [productID])
request.delegate = self
request.start()
}
else{
// Otherwise, tell the user that
// they are not authorized to make payments,
// due to parental controls, etc
}
}
// Call this when you want to restore all purchases
// regardless of the productID you gave to the initializer
public func beginRestorePurchases(){
SKPaymentQueue.default().add(self)
SKPaymentQueue.default().restoreCompletedTransactions()
}
// This is called when a SKProductsRequest receives a response
public func productsRequest(_ request: SKProductsRequest, didReceive response: SKProductsResponse){
// Let's try to get the first product from the response
// to the request
if let product = response.products.first{
// We were able to get the product! Make a new payment
// using this product
let payment = SKPayment(product: product)
// add the new payment to the queue
SKPaymentQueue.default().add(self)
SKPaymentQueue.default().add(payment)
}
else{
// Something went wrong! It is likely that either
// the user doesn't have internet connection, or
// your product ID is wrong!
//
// Tell the user in requestFailed() by sending an alert,
// or something of the sort
RemoveAdsManager.removeAdsFailure()
}
}
// This is called when the user restores their IAP sucessfully
private func paymentQueueRestoreCompletedTransactionsFinished(_ queue: SKPaymentQueue){
// For every transaction in the transaction queue...
for transaction in queue.transactions{
// If that transaction was restored
if transaction.transactionState == .restored{
// get the producted ID from the transaction
let productID = transaction.payment.productIdentifier
// In this case, we have only one IAP, so we don't need to check
// what IAP it is. However, this is useful if you have multiple IAPs!
// You'll need to figure out which one was restored
if(productID.lowercased() == IAPManager.removeAdsID.lowercased()){
// Restore the user's purchases
RemoveAdsManager.restoreRemoveAdsSuccess()
}
// finish the payment
SKPaymentQueue.default().finishTransaction(transaction)
}
}
}
// This is called when the state of the IAP changes -- from purchasing to purchased, for example.
// This is where the magic happens :)
public func paymentQueue(_ queue: SKPaymentQueue, updatedTransactions transactions: [SKPaymentTransaction]){
for transaction in transactions{
// get the producted ID from the transaction
let productID = transaction.payment.productIdentifier
// In this case, we have only one IAP, so we don't need to check
// what IAP it is.
// However, if you have multiple IAPs, you'll need to use productID
// to check what functions you should run here!
switch transaction.transactionState{
case .purchasing:
// if the user is currently purchasing the IAP,
// we don't need to do anything.
//
// You could use this to show the user
// an activity indicator, or something like that
break
case .purchased:
// the user sucessfully purchased the IAP!
RemoveAdsManager.removeAdsSuccess()
SKPaymentQueue.default().finishTransaction(transaction)
case .restored:
// the user restored their IAP!
RemoveAdsManager.restoreRemoveAdsSuccess()
SKPaymentQueue.default().finishTransaction(transaction)
case .failed:
// The transaction failed!
RemoveAdsManager.removeAdsFailure()
// finish the transaction
SKPaymentQueue.default().finishTransaction(transaction)
case .deferred:
// This happens when the IAP needs an external action
// in order to proceeded, like Ask to Buy
RemoveAdsManager.removeAdsDeferred()
break
}
}
}
}
Lastly, you need to add some way for the user to start the purchase and call RemoveAdsManager.removeAds() and start a restore and call RemoveAdsManager.restoreRemoveAds(), like a button somewhere! Keep in mind that, per the App Store guidelines, you do need to provide a button to restore purchases somewhere.
Submitting for review
The last thing to do is submit your IAP for review on App Store Connect! For detailed instructions on doing that, you can follow the last part of my Objective-C answer, under the Submitting for review header.
RMStore is a lightweight iOS library for In-App Purchases. It wraps StoreKit API and provides you with handy blocks for asynchronous requests. Purchasing a product is as easy as calling a single method.
For the advanced users, this library also provides receipt verification, content downloads and transaction persistence.