How to process images of a video, frame by frame, in video streaming using OpenCV and Python

After reading the documentation of VideoCapture. I figured out that you can tell VideoCapture, which frame to process next time we call VideoCapture.read() (or VideoCapture.grab()).

The problem is that when you want to read() a frame which is not ready, the VideoCapture object stuck on that frame and never proceed. So you have to force it to start again from the previous frame.

Here is the code

import cv2

cap = cv2.VideoCapture("./out.mp4")
while not cap.isOpened():
    cap = cv2.VideoCapture("./out.mp4")
    cv2.waitKey(1000)
    print "Wait for the header"

pos_frame = cap.get(cv2.cv.CV_CAP_PROP_POS_FRAMES)
while True:
    flag, frame = cap.read()
    if flag:
        # The frame is ready and already captured
        cv2.imshow('video', frame)
        pos_frame = cap.get(cv2.cv.CV_CAP_PROP_POS_FRAMES)
        print str(pos_frame)+" frames"
    else:
        # The next frame is not ready, so we try to read it again
        cap.set(cv2.cv.CV_CAP_PROP_POS_FRAMES, pos_frame-1)
        print "frame is not ready"
        # It is better to wait for a while for the next frame to be ready
        cv2.waitKey(1000)

    if cv2.waitKey(10) == 27:
        break
    if cap.get(cv2.cv.CV_CAP_PROP_POS_FRAMES) == cap.get(cv2.cv.CV_CAP_PROP_FRAME_COUNT):
        # If the number of captured frames is equal to the total number of frames,
        # we stop
        break

Use this:

import cv2
cap = cv2.VideoCapture('path to video file')
count = 0
while cap.isOpened():
    ret,frame = cap.read()
    cv2.imshow('window-name', frame)
    cv2.imwrite("frame%d.jpg" % count, frame)
    count = count + 1
    if cv2.waitKey(10) & 0xFF == ord('q'):
        break

cap.release()
cv2.destroyAllWindows() # destroy all opened windows

According to the latest updates for OpenCV 3.0 and higher, you need to change the Property Identifiers as follows in the code by Mehran:

cv2.cv.CV_CAP_PROP_POS_FRAMES

to

cv2.CAP_PROP_POS_FRAMES

and same applies to cv2.CAP_PROP_POS_FRAME_COUNT.

Hope it helps.


In openCV's documentation there is an example for getting video frame by frame. It is written in c++ but it is very easy to port the example to python - you can search for each fumction documentation to see how to call them in python.

#include "opencv2/opencv.hpp"

using namespace cv;

int main(int, char**)
{
    VideoCapture cap(0); // open the default camera
    if(!cap.isOpened())  // check if we succeeded
        return -1;

    Mat edges;
    namedWindow("edges",1);
    for(;;)
    {
        Mat frame;
        cap >> frame; // get a new frame from camera
        cvtColor(frame, edges, CV_BGR2GRAY);
        GaussianBlur(edges, edges, Size(7,7), 1.5, 1.5);
        Canny(edges, edges, 0, 30, 3);
        imshow("edges", edges);
        if(waitKey(30) >= 0) break;
    }
    // the camera will be deinitialized automatically in VideoCapture destructor
    return 0;
}

This is how I would start to solve this:

  1. Create a video writer:

    import cv2.cv as cv
    videowriter = cv.CreateVideoWriter( filename, fourcc, fps, frameSize)
    

    Check here for valid parameters

  2. Loop to retrieve[1] and write the frames:

    cv.WriteFrame( videowriter, frame )
    

    WriteFrame doc

[1] zenpoy already pointed in the correct direction. You just need to know that you can retrieve images from a webcam or a file :-)

Hopefully I understood the requirements correct.