Android 4.3 Bluetooth Low Energy unstable

I am currently developing an application that will use Bluetooth Low Energy (testing on the Nexus 4). After getting started with the official BLE APIs in Android 4.3, I have noticed that after I connect a device for the first time I am rarely able to successfully connect to / communicate with that device or any other device again.

Following the guide here, I can successfully connect to a device, scan services and characteristics, and read/write/receive notifications without any issues. However, after disconnecting and re-connecting, I am often unable to either scan services/characteristics or unable to complete a read/write. I can't find anything in the logs to indicate why this is happening.

Once this happens I have to uninstall the application, disable Bluetooth, and restart the phone before it will start working again.

Whenever a device is disconnected I make sure to call close() on the BluetoothGatt object and set it to null. Any insights?

EDIT:
Log dumps: For these logs I rooted my phone and upped the trace levels of related items in /etc/bluetooth/bt_stack.conf

Successful connection - First attempt after rebooting the phone and installing the app. I am able to connect, discover all services/characteristics, and read/write.

Failed Attempt 1 - This is the next attempt after disconnecting from the successful connection above. It seems I was able to discover characteristics, but the first attempt to read returned a null value and disconnected soon thereafter.

Failed Attempt 2 - An example where I am not even able to discover services/characteristics.

EDIT 2:
The device to which I am trying to connect is based on TI's CC2541 chip. I obtained a TI SensorTag (also based on the CC2541) to play around with and discovered that TI released an android app for the SensorTag yesterday. However, this app has the same problem. I tested this on two other Nexus 4s with the same result: Connection to the SensorTag is successful the first or second time, but (according to the logs) fails to discover services thereafter, causing all sorts of crashes. I'm starting to wonder if it's an issue with this specific chip?

Important implementation hints

(Perhaps some of those hints aren't necessary anymore due to Android OS updates.)

1. Some devices like Nexus 4 with Android 4.3 take 45+ seconds to connect using an existing gatt instance. Work around: Always close gatt instances on disconnect and create a fresh instance of gatt on each connect.
2. Don't forget to call android.bluetooth.BluetoothGatt#close()
3. Start a new thread inside onLeScan(..) and then connect. Reason: BluetoothDevice#connectGatt(Context context, boolean autoConnect, BluetoothGattCallback callback) always fails, if called inside LeScanCallback() {...}.onLeScan(BluetoothDevice device, int rssi, byte[] scanRecord) in the same thread on Samsung Galaxy S3 with Android 4.3 (at least for build JSS15J.I9300XXUGMK6)
4. Most devices filter advertising
5. Better not use android.bluetooth.BluetoothAdapter#startLeScan(UUID[] serviceUuids, LeScanCallback callback) with the parameter to filter for certain service UUIDs because this is broken completely in Samsung Galaxy S3 with Android 4.3 and doesn't work for 128bit UUIDs in general.
6. Gatt always can process one command at a time. If several commands get called short after another, the first one gets cancelled due to the synchronous nature of the gatt implementation.
7. I often see even on modern devices with Android 5, that Wifi interferes withs bluetooth and vice versa. As a last resort, turn off wifi to stabilize bluetooth.

Tutorial for beginners

A pretty OK entry point for newcomers could be this video tutorial: Developing Bluetooth Smart Applications for Android http://youtu.be/x1y4tEHDwk0

The issue and work around described below is probably fixed now by OS updates

Work around: I could "stabilize" my app doing that...

1. I provide the user a setting "Restart Bluetooth". If that setting is enabled, I restart Bluetooth at some points that indicate the begin of BLE stack becoming unstable. E.g. if startScan returns false. A good point may also be if serviceDiscovery failes. I just turn Bluetooth off and on.
2. I provide another setting "Turn off WiFi". If that setting is enabled, my app turns off Wifi when the app is running (and turns it back on afterwards)

This work around is based on follwoing experiences...

• Restarting Bluetooth helps to fix problems with BLE in most cases
• If you turn off Wifi, the BLE stack gets much more stable. However, it also works fine on most devices with wifi turned on.
• If you turn off Wifi, restarting Bluetooth fully recovers the BLE stack without the need to reboot the device in most cases.

Turning WIFI OFF:

I can confirm too, that turning WIFI OFF makes Bluetooth 4.0 more stable especially on Google Nexus (I have a Nexus 7).

The problem

is that the application I am developing needs both WIFI and continous Bluetooth LE scanning. So turning WIFI OFF was no option for me.

Moreover I have realised is that continous Bluetooth LE scanning can actually kill WIFI connection and make the WIFI adapter unable to re-connect to any WIFI network until BLE scan is ON. (I'm not sure about mobile networks and mobile internet).
This definitely happened on the following devices:

• Nexus 7
• Motorola Moto G

However BLE scanning with WIFI on seemed pretty stable on:

• Samsung S4
• HTC One

My workaround

I scan BLE for a short period of time 3-4 seconds then I turn scan OFF for 3-4 seconds. Then ON again.

• Obviously I always turn BLE scan OFF when I'm connecting to a BLE device.
• When I disconnect from a device I restart BLE (turn adapter OFF and then ON) to reset the stack before starting scan again.
• I also reset BLE when discovering services or characteristics fails.
• When I get advertisement data from a device that the app should connect to (lets say 500 times without being able to connect - thats about 5-10 seconds of advertising) I reset BLE again.

Make sure your Nexus is paired to the device. I can't verify whether or not the communication works properly, but you will be able to connect more than once without a reboot. It seems the first connect is not requiring pairing but all subsequent attempts do.

I will update this answer in a couple of days when I test service discovery and gatt read and write requests without a reboot.

EDIT: It turns out I was testing on a development firmware version (our sensor) that was causing issues if not paired. Our latest production firmware build works fine on the 2540s and 2541s.

EDIT: I did notice that on the Nexus 7 2013, connections are more stable when WiFi is turned off. I'd like to know if this helps anyone else.

EDIT: I seem to have had it backwards with pairing. Everything works fine when not paired. After pairing, I am experiencing the exact same symptoms as the OP. It's just not known yet if this is related to our firmware or the Android BLE API. Be careful if testing this because once paired, you may not be able to unpair due to a bug explained in 3b of this post.